Buchumschlag

Study of influence of structurizing regims on the properties of structural glass-fiber plastics

Manufacturing of glass-fiber articles under specified strength characteristics, different ratio of layer thickness to inner diameter and without defects and delaminations is investigated. The influence of technological regimes, degree of curing on the physical and mechanical characteristics of glass...

Ausführliche Beschreibung

Gespeichert in:

Bibliographische Detailangaben
Veröffentlicht in:	Functional Materials
Datum:	2018
Hauptverfasser:	Karandashov, O.H., Avramenko, V.L., Vashchenko, O.V., Podhornaya, L.F.
Format:	Artikel
Sprache:	Englisch
Veröffentlicht:	НТК «Інститут монокристалів» НАН України 2018
Schlagworte:	Technology
Online Zugang:	https://nasplib.isofts.kiev.ua/handle/123456789/157437
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:	Digital Library of Periodicals of National Academy of Sciences of Ukraine
Zitieren:	Study of influence of structurizing regims on the properties of structural glass-fiber plastics / O.H. Karandashov, V.L. Avramenko, O.V. Vashchenko, L.F. Podhornaya // Functional Materials. — 2018. — Т. 25, № 4. — С. 818-822. — Бібліогр.: 5 назв. — англ.

Institution

Digital Library of Periodicals of National Academy of Sciences of Ukraine

Ähnliche Einträge

Influence of structural factors on physico-chemical properties of glasses and glass coatings in alkalialumoborosilicate system
von: Shalygina, O., et al.
Veröffentlicht: (2016)

Study on the Compression Moulding of Intercrossed Pre-Preg Glass FiberReinforced Plastic
von: Kim, J.W.
Veröffentlicht: (2016)

Experimental Analysis of the Influence of Structural Parameters on the Behavior of Glass-Fiber Reinforced Polypropylene Composites
von: Bounouas, L., et al.
Veröffentlicht: (2001)

Investigation of structure formation in lithium silicate glasses on initial stages of nucleation
von: Savvova, O., et al.
Veröffentlicht: (2017)

Implantation of a holographic structure and waveguide periodic structures formed by silver nanoparticles into AgCl-Ag film and quartz glass
von: Beloshenko, K.S., et al.
Veröffentlicht: (2010)

Protective impact resistant composite materials based on aluminium-silicate glass-ceramics
von: Savvova, O.V., et al.
Veröffentlicht: (2019)

Development of plastic deformation in two-dimensional copper polycrystals with different twin structure
von: Ftomov, Ye.V., et al.
Veröffentlicht: (2022)

Identification method of structural defects in glass fiber fabric/epoxy resin laminate
von: Naceri, A.
Veröffentlicht: (2009)

Influence of solution precursors on structure of ZnO films
von: Berestok, T.O., et al.
Veröffentlicht: (2015)

Influence of processing conditions on the structure and properties of yttrium oxide ceramics
von: Baumer, V.N., et al.
Veröffentlicht: (2012)

Obtaining of hydration parameters of cesium halides in the processes of water absorption and desorption
von: Vashchenko, O.V.
Veröffentlicht: (2014)

The plastic scintillator for n/γ-discrimination with alkyl-substituted PPO derivative.
von: Zhmurin, P.N., et al.
Veröffentlicht: (2017)

Nano-sized phase inclusions in As₂S₃ glass, films and fibers based on this glass
von: Mateleshko, N., et al.
Veröffentlicht: (2004)

Influence of intensive etching processes on structure and properties of carbon nitride films
von: Shalaev, R.V., et al.
Veröffentlicht: (2008)

Synthesis of charged silica films of porous structure
von: Zharkikh, Yu.S., et al.
Veröffentlicht: (2008)

Structural behaviour of continuous solid solution SmCo₁₋xFexO₃
von: Kharko, O.V., et al.
Veröffentlicht: (2014)

Influence of deposition rate and substrate temperature on structure and optical features of NiO thin film
von: Oberemok, O.S., et al.
Veröffentlicht: (2016)

CT study of products from non-metallic composites reinforced by carbon fibers
von: Levenets, V.V., et al.
Veröffentlicht: (2022)

Mathematical model of optimization of annealing regimes by the stress state for heat-sensitive glass elements of structures
von: O. Hachkevych, et al.
Veröffentlicht: (2018)

Plastic scintillators based on polymers with hindered excimer forming
von: Adadurov, A.F., et al.
Veröffentlicht: (2011)

Radiation-hard plastic scintillator with increased mechanical strength
von: Zhmurin, P.N., et al.
Veröffentlicht: (2015)

Laser-induced incandescence of borate glass doped with carbon microparticles
von: Kopyshinsky, A.V., et al.
Veröffentlicht: (2011)

Mechanical Properties and Machinability of Glass Fiber-Reinforced Polyetheretherketone
von: Ji, S.J., et al.
Veröffentlicht: (2015)

Synthesis and optical properties of phosphate-borate-fluoride glasses doped with rare earth elements
von: Belikov, K.N., et al.
Veröffentlicht: (2010)

Macroscopic simulation of atom-sized structures of functional materials: phenomenology of the elongated electrode system
von: Pospelov, A.P., et al.
Veröffentlicht: (2017)

High-efficient microwave-assisted method for the preparation of foamed liquid glass granules
von: Rimar, T.E., et al.
Veröffentlicht: (2016)

Directed phase formation of functional glass-crystalline coatings for ceramics in TiO₂-Al₂O₃-SiO₂ system
von: Lisachuk, G.V., et al.
Veröffentlicht: (2015)

Intense plastic deformation of high-purity cast beryllium
von: Vasilev, A.A., et al.
Veröffentlicht: (2020)

Mixed-ligand complexes of gadolinium carboxylates containing unsaturated bonds in plastic scintillators
von: Velmozhnaya, E.S., et al.
Veröffentlicht: (2015)

The new radiation-hard plastic scintillators with diffusion enhancers and 3-hydroxyflavone derivatives
von: Velmozhnaya, E.S., et al.
Veröffentlicht: (2016)

Aluminium barium phosphate glass laser emitting at λ = 1.54 µm
von: Dzyubenko, M.I., et al.
Veröffentlicht: (2008)

Optical properties of LiNbO₃:Zn and LiNbO₃:Zn:Nd fiber single crystals grown by micro-pulling down method
von: H.J. Lee, et al.
Veröffentlicht: (2007)

Some peculiarities of the use of sapphire light guides in metallurgy
von: Zhukov, L.F., et al.
Veröffentlicht: (2010)

Application of cathodoluminescence for on-line monitoring of regime of an industrial electron accelerator
von: Pomatsalyuk, R.I., et al.
Veröffentlicht: (2019)

Influence of surface treatment conditions for organic crystalline scintillators on their scintillation characteristics
von: Tarasov, V.O., et al.
Veröffentlicht: (2018)

Structure modification of carbon nitride films by heat treatment
von: Varyukhin, V.N., et al.
Veröffentlicht: (2010)

Determining the technological mode of foaming of blocked heat-insulating material based on liquid glass in microwave equipment
von: Rymar, T.
Veröffentlicht: (2018)

Enhance the viscosity properties of ball-shaped Carbonyl iron based magnetorheological fluid by adding glass particles
von: CHEN Bingsan, et al.
Veröffentlicht: (2018)

Optimization of welding heat regimes for glass shell construction
von: O. Hachkevych, et al.
Veröffentlicht: (2018)

Physical and chemical, structural and technological properties of melts, glasses and fibres on the basis of rocks and waste of metallurgical manufactures. Part 2. Researches of properties and structure of modification mineral fibers
von: I. I. Diduk, et al.
Veröffentlicht: (2010)