Buchumschlag

Major Stress-Strain State of Double Support Multilayer Beams Under Concentrated Load. Part 1. Model Construction

The purpose of this paper is to design an analytical model for bending double support multilayer beams under concentrated load based on the previously obtained solution of the elasticity theory for a multi-layer cantilever. Метою цієї роботи є побудова аналітичної моделі вигину двохопорних багатошар...

Ausführliche Beschreibung

Gespeichert in:

Bibliographische Detailangaben
Veröffentlicht in:	Проблеми машинобудування
Datum:	2018
Hauptverfasser:	Kovalchuk, S.B., Gorik, A.V.
Format:	Artikel
Sprache:	Englisch
Veröffentlicht:	Інстиут проблем машинобудування ім. А.М. Підгорного НАН України 2018
Schlagworte:	Dynamics and Strength of Machines
Online Zugang:	https://nasplib.isofts.kiev.ua/handle/123456789/158804
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:	Digital Library of Periodicals of National Academy of Sciences of Ukraine
Zitieren:	Major Stress-Strain State of Double Support Multilayer Beams Under Concentrated Load. Part 1. Model Construction / S.B. Kovalchuk, A.V. Gorik // Проблеми машинобудування. — 2018. — Т.21, № 4. — С. 30-36. — Бібліогр.: 14 назв. — англ, рос.

Institution

Digital Library of Periodicals of National Academy of Sciences of Ukraine

Ähnliche Einträge

Major Stress-Strain State of Double Support Multilayer Beams Under Concentrated Load. Part 2. Model Implementation and Calculation Results
von: Kovalchuk, S.B., et al.
Veröffentlicht: (2019)

Major stress-strain state of double support multilayer beams under concentrated load. Part 1. Model construction
von: Kovalchuk, S. B., et al.
Veröffentlicht: (2019)

Major stress-strain state of double support multilayer beams under concentrated load. Part 1. Model construction
von: Kovalchuk, S. B., et al.
Veröffentlicht: (2019)

Major Stress-Strain State of Double Support Multilayer Beams Under Concentrated Load. Part 1. Model Construction
von: S. B. Kovalchuk, et al.
Veröffentlicht: (2018)

Stress Concentration in Vertical Tank Weld Seams
von: Uspenskiy, B.V., et al.
Veröffentlicht: (2018)

Investigation of the Stress Strain State of the Layer with a Longitudinal Cylindrical Thick-Walled Tube and the Displacements Given at the Boundaries of the Layer
von: Miroshnikov, V.Yu.
Veröffentlicht: (2019)

Influence of Thermal and Mechanical Factors on the Stressed State of Large Components of Hydrogenerator-Motors
von: Tretyak, A.V., et al.
Veröffentlicht: (2018)

Thermal and Stress State of the Steam Turbine Control Valve Casing, with the Turbine Operation in the Stationary Modes
von: Koliadiuk, A.S., et al.
Veröffentlicht: (2019)

Study of the Stressed State Near the Crack That Initiates at the Inclusion Under Longitudinal Shift Wave Influence
von: Misharin, A.S., et al.
Veröffentlicht: (2018)

Stressed State of a Hollow Cylinder with a System of Cracks under Longitudinal Shear Harmonic Oscillations
von: Kyrylova, O.I., et al.
Veröffentlicht: (2019)

Vibration Features of Titanium Alloy Blades with Erosive Damages
von: Vorobiov, Yu.S., et al.
Veröffentlicht: (2018)

Dynamic Processes During the Through-plastic-damper Shock Interaction of Rocket Fairing Separation System Components
von: Zaytsev, B.F., et al.
Veröffentlicht: (2018)

Stepwise Optimization of I-section Flexible Elements Under a Fuzzy Approach to Taking into Account Corrosion and Protective Properties of Anticorrosive Coating
von: Fridman, M.M.
Veröffentlicht: (2018)

Experimental Strength Analysis of Variable Stiffness Waffel-Grid Cylindrical Compartments. Part 1. Experimental Procedure
von: Degtyarev, M.A., et al.
Veröffentlicht: (2019)

Experimental Strength Analysis of Variable Stiffness Waffel-Grid Cylindrical Compartments. Part 2. Analysis Results
von: Degtyarev, M.A., et al.
Veröffentlicht: (2019)

Use of Refined Finite Element Models for Solving the Contact Thermoalasticity Problem of Gas Turbine Rotors
von: Kairov, A.S., et al.
Veröffentlicht: (2018)

Substantiation of Boundary Accelerations of Roller Forming Unit Optimal Reversal Mode According to Forth-Order Acceleration
von: Loveykin, V.S., et al.
Veröffentlicht: (2019)

Design Forecasting of Thermal Strength and Resource of Steam Turbine structural Components
von: Shulzhenko, N.G., et al.
Veröffentlicht: (2018)

Prediction of Flow Accelerated Corrosion of NPP Pipeline Elements by Network Simulation Method
von: Biblik, I.V., et al.
Veröffentlicht: (2018)

Major Stress-Strain State of Double Support Multilayer Beams Under Concentrated Load. Part 2. Model Implementation and Calculation Results
von: Kovalchuk, S. B., et al.
Veröffentlicht: (2019)

Major Stress-Strain State of Double Support Multilayer Beams Under Concentrated Load. Part 2. Model Implementation and Calculation Results
von: Kovalchuk, S. B., et al.
Veröffentlicht: (2019)

Major Stress-Strain State of Double Support Multilayer Beams Under Concentrated Load. Part 2. Model Implementation and Calculation Results
von: S. B. Kovalchuk, et al.
Veröffentlicht: (2019)

Short pulse electron linac with full beam loading compensation
von: Mytrochenko, V.V., et al.
Veröffentlicht: (2020)

Construction of probabilistic solutions of the Boltzmann equation
von: Virchenko, Yu.P., et al.
Veröffentlicht: (2007)

Formation of electron beams with given spatial distributions by the scanner
von: Rudychev, V.G., et al.
Veröffentlicht: (2022)

Radiation of virtual cathode sequence in magnetized relativistic electron beam
von: Gorban, А.М., et al.
Veröffentlicht: (2019)

Electron beam dynamics at output magnetron gun in gradient magnetic field
von: Mazmanishvili, A.S., et al.
Veröffentlicht: (2019)

On beam propagation stability in a linac accelerating channel based on combined RF-focusing
von: Tishkin, S.S., et al.
Veröffentlicht: (2019)

Dynamics of the electron beam generated by the magnetron gun with different configurations of the magnetic field in the transportation channel
von: Mazmanishvili, O.S., et al.
Veröffentlicht: (2021)

Dynamics of the Pulse Loaded Beam with One-Side Support Constraints
von: V. P. Olshanskij, et al.
Veröffentlicht: (2019)

On the possibility of obtaining a beam of heavy ions in the form of an “open umbrella” with subsequent deposition in the separator manifold
von: Yuferov, V.B., et al.
Veröffentlicht: (2023)

Major physical characteristics of Rochelle salt: the role of thermal strains
von: Moina, A.P.
Veröffentlicht: (2012)

Solving the Problem of Elastic Bending of Layered Console by the Normal Linearly Distributed Load on Longitudinal Faces
von: A. V. Gorik, et al.
Veröffentlicht: (2020)

Research of the Stress-Strain State for Steel Support Structures of Nuclear Power Plant Components under Seismic Loads
von: O. Shugaylo, et al.
Veröffentlicht: (2022)

COMPARATIVE ANALYSIS OF TWO HIGH-SPEED SINGLE-PHASE ELECTRICAL MACHINES WITH PERMANENT MAGNETS ON THE STATOR
von: Prakht, V. A., et al.
Veröffentlicht: (2020)

Fault-tolerant control of a double star induction machine operating in active redundancy
von: Guizani, S., et al.
Veröffentlicht: (2025)

Stress concentration at the holes in an elastic plane under antiplane strain
von: M. P. Savruk, et al.
Veröffentlicht: (2012)

Major trends in the development of electromechanical energy converters for systems with periodic load
von: O. V. Bibik
Veröffentlicht: (2016)

Damaging of pure tungsten with different microstructure under sequential QSPA and LHD plasma loads
von: Herashchenko, S.S., et al.
Veröffentlicht: (2020)

Double layer back propagation neural network based on restricted Boltzmann machines for forecasting daily particulate matter 2.5
von: Fu, Minglei, et al.
Veröffentlicht: (2017)