Tungsten heavy alloys with molybdenum, Y₂O₃ and lanthanum. A review
The consolidated results of studies of tungsten doping with various metals and compounds (Ni, Fe, Cu, Mo, Y₂O₃, La₂O₃) are presented, the advantages of doping with regard to its conditions, microwave and plasma sintering techniques are shown. It has been found that the mechanical properties of tungs...
Gespeichert in:
| Veröffentlicht in: | Сверхтвердые материалы |
|---|---|
| Datum: | 2019 |
| Hauptverfasser: | Lakshmi Prasad, B.S., Raja Annamalai, A. |
| Format: | Artikel |
| Sprache: | Englisch |
| Veröffentlicht: |
Інститут надтвердих матеріалів ім. В.М. Бакуля НАН України
2019
|
| Schlagworte: | |
| Online Zugang: | https://nasplib.isofts.kiev.ua/handle/123456789/167286 |
| Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
| Назва журналу: | Digital Library of Periodicals of National Academy of Sciences of Ukraine |
| Zitieren: | Tungsten heavy alloys with molybdenum, Y₂O₃ and lanthanum. A review / B. S. Lakshmi Prasad, A. Raja Annamalai // Надтверді матеріали. — 2019. — № 1 (237). — С. 3-22. — Бібліогр.: 51 назв. — англ. |
Institution
Digital Library of Periodicals of National Academy of Sciences of UkraineÄhnliche Einträge
Tungsten heavy alloys with molybdenum, Y2O3 and lanthanum. A review
von: B. S.L. Prasad, et al.
Veröffentlicht: (2019)
von: B. S.L. Prasad, et al.
Veröffentlicht: (2019)
The effect of sintering temperature on wear resistance of alloys produced by using hot isostatic pressing method
von: Tülay Yıldız, et al.
Veröffentlicht: (2019)
von: Tülay Yıldız, et al.
Veröffentlicht: (2019)
Іскро-плазмове спікання металокерамічного композита Cu–(LaB6–TiB2) та його фізико- механічні властивості
von: Соловйова, Т.О., et al.
Veröffentlicht: (2019)
von: Соловйова, Т.О., et al.
Veröffentlicht: (2019)
Chemical synthesis of niobium diboride nanosheets by a solid-state reaction route
von: Wang Liangbiao, et al.
Veröffentlicht: (2018)
von: Wang Liangbiao, et al.
Veröffentlicht: (2018)
Влияние безводородного ионного азотирования на физико-механические и эксплуатационные характеристики твердых сплавов Т5К10, Т15К6
von: Каплун, П.В., et al.
Veröffentlicht: (2018)
von: Каплун, П.В., et al.
Veröffentlicht: (2018)
Theoretical and experimental evidence for a post-cotunnite phase transition in hafnia at high pressures
von: Al-Khatatbeh Yahya, et al.
Veröffentlicht: (2018)
von: Al-Khatatbeh Yahya, et al.
Veröffentlicht: (2018)
Особливості впливу умов спікання дрібнозернистого твердого сплаву WC–10Co на його структуру, фізико-механічні та експлуатаційні характеристики
von: Прокопів, М.М., et al.
Veröffentlicht: (2019)
von: Прокопів, М.М., et al.
Veröffentlicht: (2019)
Effect of different binder phases on the Σ2 grain boundary plane distribution in cemented carbides
von: Xiaokun Yuan
Veröffentlicht: (2019)
von: Xiaokun Yuan
Veröffentlicht: (2019)
Friction-wear behaviors of chemical vapor deposited diamond films at high temperatures
von: Kong Dejun, et al.
Veröffentlicht: (2019)
von: Kong Dejun, et al.
Veröffentlicht: (2019)
Исследование процесса электрохимического осаждения золота в лимоннокислом и фосфорнокислом электролите в присутствии модифицированных детонационных наноалмазов
von: Долматов, В.Ю., et al.
Veröffentlicht: (2019)
von: Долматов, В.Ю., et al.
Veröffentlicht: (2019)
Люминесцентные и радиационные характеристики монокристаллических алмазных порошков
von: Лысенко, О.Г., et al.
Veröffentlicht: (2019)
von: Лысенко, О.Г., et al.
Veröffentlicht: (2019)
Mechanical properties of boron phosphides
von: Solozhenko, V.L., et al.
Veröffentlicht: (2019)
von: Solozhenko, V.L., et al.
Veröffentlicht: (2019)
Об устойчивости изолированных пор в спеченных твердых сплавах (Ti,W)C–WC–Co
von: Давиденко, С.А.
Veröffentlicht: (2019)
von: Давиденко, С.А.
Veröffentlicht: (2019)
Критериальная оценка повышения эксплуатационных характеристик деталей авиаконструкций с газотермическими покрытиями
von: Бычков, А.С., et al.
Veröffentlicht: (2019)
von: Бычков, А.С., et al.
Veröffentlicht: (2019)
Плазмохімічне устаткування для осадження нанокомпозитних наношаруватих плівок
von: Порада, О.К., et al.
Veröffentlicht: (2019)
von: Порада, О.К., et al.
Veröffentlicht: (2019)
Вплив умов отримання на мікроструктуру, фазовий склад та властивості евтектичного сплаву системи WC–W₂C
von: Троснікова, І.Ю., et al.
Veröffentlicht: (2019)
von: Троснікова, І.Ю., et al.
Veröffentlicht: (2019)
Влияние in situ образованных боридов TiВ₂–VB₂ на структуру и свойства горячепрессованной керамической системы B₄C–(TiH₂–VC)
von: Кайдаш, О.Н., et al.
Veröffentlicht: (2018)
von: Кайдаш, О.Н., et al.
Veröffentlicht: (2018)
Effect of graphite addition on impregnated diamond bit properties
von: Lanlan Xie, et al.
Veröffentlicht: (2019)
von: Lanlan Xie, et al.
Veröffentlicht: (2019)
Low temperature thermal conductivity of heavily boron-doped synthetic diamond: Influence of boron-related structure defects
von: Prikhodko, D., et al.
Veröffentlicht: (2019)
von: Prikhodko, D., et al.
Veröffentlicht: (2019)
A molecular dynamics based comparison of the mechanical properties of three polytypes of cubic BC₃
von: Kishor, E., et al.
Veröffentlicht: (2019)
von: Kishor, E., et al.
Veröffentlicht: (2019)
Разработка процесса электрохимического осаждения никель-алмазного покрытия с модифицированными фосфором ДНА
von: Долматов, В.Ю., et al.
Veröffentlicht: (2019)
von: Долматов, В.Ю., et al.
Veröffentlicht: (2019)
Functional properties of multicomponent galvanic alloys of iron with molybdenum and tungsten
von: Karakurkchi, A.V., et al.
Veröffentlicht: (2015)
von: Karakurkchi, A.V., et al.
Veröffentlicht: (2015)
Methods of strain hardening tungsten heavy alloy and their influence on properties of alloy after deformation (review)
von: V. V. Melnychenko, et al.
Veröffentlicht: (2016)
von: V. V. Melnychenko, et al.
Veröffentlicht: (2016)
Гибридизированные полисиликат/полиэпоксиакрилат-уретанoмочевинные системы.IІ. Исследование морфологии методом атомной силовой микроскопии
von: Грищук, С., et al.
Veröffentlicht: (2008)
von: Грищук, С., et al.
Veröffentlicht: (2008)
Some aspects of viscoplastic flow in blanks of tungsten-based heavy alloys
von: I. V. Andreiev
Veröffentlicht: (2015)
von: I. V. Andreiev
Veröffentlicht: (2015)
Corrosion stability of molybdenum and tungsten coatings in lead-bismuth eutectic
von: Azhazha, V.M., et al.
Veröffentlicht: (2005)
von: Azhazha, V.M., et al.
Veröffentlicht: (2005)
Raman spectra of graphene-like nanoparticles of molybdenum and tungsten disulfides
von: A. Naumenko, et al.
Veröffentlicht: (2016)
von: A. Naumenko, et al.
Veröffentlicht: (2016)
Raman spectra of graphene-like nanoparticles of molybdenum and tungsten disulfides
von: A. Naumenko, et al.
Veröffentlicht: (2016)
von: A. Naumenko, et al.
Veröffentlicht: (2016)
Formation of the phase composition and microstructure of Tungsten free hard alloys with nickel molybdenum binder in the sintering process
von: A. M. Stepanchuk, et al.
Veröffentlicht: (2018)
von: A. M. Stepanchuk, et al.
Veröffentlicht: (2018)
Methods of control of the structure of coatings of molybdenum and tungsten in tungstate-molybdate melts
von: V. V. Malyshev, et al.
Veröffentlicht: (2018)
von: V. V. Malyshev, et al.
Veröffentlicht: (2018)
SIMS study of the surface of lanthanum-based alloys
von: V. O. Litvinov, et al.
Veröffentlicht: (2017)
von: V. O. Litvinov, et al.
Veröffentlicht: (2017)
SIMS study of the surface of lanthanum-based alloys
von: V. A. Litvinov, et al.
Veröffentlicht: (2017)
von: V. A. Litvinov, et al.
Veröffentlicht: (2017)
Дослідження процесу адсорбції поліелектролітів методом п’єзокварцового мікрозважування
von: Гузенко, Н.В., et al.
Veröffentlicht: (2008)
von: Гузенко, Н.В., et al.
Veröffentlicht: (2008)
Оптимальний вміст бензилдиметиламіну для отверднення епоксидного олігомеру
von: Малахова, І.В., et al.
Veröffentlicht: (2008)
von: Малахова, І.В., et al.
Veröffentlicht: (2008)
Вплив природи дисперсних наповнювачів на структуру, теплофізичні властивості та електропровідність композитів на основі епоксидної смоли
von: Віленський, В.О., et al.
Veröffentlicht: (2008)
von: Віленський, В.О., et al.
Veröffentlicht: (2008)
Фазова поведінка сумішей поліхлоропрену з етиленвінілацетатним кополімером
von: Нестеров, А.А., et al.
Veröffentlicht: (2008)
von: Нестеров, А.А., et al.
Veröffentlicht: (2008)
Адгезійні властивості композицій, які містять суміші наповнювачів, що змінюють агрегатний стан або хімічний склад під час утворення композиції
von: Давиденко, В.В., et al.
Veröffentlicht: (2008)
von: Давиденко, В.В., et al.
Veröffentlicht: (2008)
Нові нанопористі матеріали на основі термостійких поліціануратів
von: Григор’єва, О.П., et al.
Veröffentlicht: (2008)
von: Григор’єва, О.П., et al.
Veröffentlicht: (2008)
Структура та властивості сітчастого полі(бісфенол А) ціанурату, модифікованого олігоізопрендіацилгідразоном метилетилкетону
von: Файнлейб, О.М., et al.
Veröffentlicht: (2008)
von: Файнлейб, О.М., et al.
Veröffentlicht: (2008)
Мікрогетерогенна структура композитів на основі епоксидної смоли та оксиду Fe(ІІІ) або Аl(III).
von: Штомпель, В.І., et al.
Veröffentlicht: (2008)
von: Штомпель, В.І., et al.
Veröffentlicht: (2008)
Ähnliche Einträge
-
Tungsten heavy alloys with molybdenum, Y2O3 and lanthanum. A review
von: B. S.L. Prasad, et al.
Veröffentlicht: (2019) -
The effect of sintering temperature on wear resistance of alloys produced by using hot isostatic pressing method
von: Tülay Yıldız, et al.
Veröffentlicht: (2019) -
Іскро-плазмове спікання металокерамічного композита Cu–(LaB6–TiB2) та його фізико- механічні властивості
von: Соловйова, Т.О., et al.
Veröffentlicht: (2019) -
Chemical synthesis of niobium diboride nanosheets by a solid-state reaction route
von: Wang Liangbiao, et al.
Veröffentlicht: (2018) -
Влияние безводородного ионного азотирования на физико-механические и эксплуатационные характеристики твердых сплавов Т5К10, Т15К6
von: Каплун, П.В., et al.
Veröffentlicht: (2018)