Microstructure and properties of titanium-based materials promising for antiballistic protection
Titanium-based materials, which combine high strength and hardness of surface layer along with sufficient ductile characteristics of the matrix metal, are very promising for various applications, particularly, as armoured components in military-industrial complex. Above-mentioned combination of prop...
Gespeichert in:
| Veröffentlicht in: | Успехи физики металлов |
|---|---|
| Datum: | 2019 |
| Hauptverfasser: | Ivasishin, О.М., Markovsky, P.E., Savvakin, D.G., Stasiuk, O.О., Golub, V.A., Mirnenko, V.І., Sedov, S.H., Kurban, V.А., Antonyuk, S.L. |
| Format: | Artikel |
| Sprache: | Englisch |
| Veröffentlicht: |
Інститут металофізики ім. Г.В. Курдюмова НАН України
2019
|
| Online Zugang: | https://nasplib.isofts.kiev.ua/handle/123456789/167927 |
| Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
| Назва журналу: | Digital Library of Periodicals of National Academy of Sciences of Ukraine |
| Zitieren: | Microstructure and properties of titanium-based materials promising for antiballistic protection / О.М. Іvasishin, P.E. Markovsky, D.G. Savvakin, O.О. Stasiuk, V.A. Golub, V.І. Mirnenko, S.H. Sedov, V.А. Kurban, S.L. Antonyuk // Progress in Physics of Metals. — 2019. — Vol. 20, No 2. — P. 285-309. — Bibliog.: 25 titles. — eng. |
Institution
Digital Library of Periodicals of National Academy of Sciences of UkraineÄhnliche Einträge
Microstructure and properties of titanium-based materials promising for antiballistic protection
von: O. M. Ivasishin, et al.
Veröffentlicht: (2019)
von: O. M. Ivasishin, et al.
Veröffentlicht: (2019)
Additive manufacturing of titanium-based materials using electron beam wire 3D printing approach: peculiarities, advantages, and prospects
von: O. M. Ivasishin, et al.
Veröffentlicht: (2023)
von: O. M. Ivasishin, et al.
Veröffentlicht: (2023)
New promising titanium-based alloys
von: S. V. Akhonin, et al.
Veröffentlicht: (2019)
von: S. V. Akhonin, et al.
Veröffentlicht: (2019)
Effect of microstructure, deformation mode and rate on mechanical behaviour of electron-beam melted Ti-6Al-4V and Ti-1.5Al-6.8Mo-4.5Fe alloys
von: Ivasishin, O.M., et al.
Veröffentlicht: (2018)
von: Ivasishin, O.M., et al.
Veröffentlicht: (2018)
Evolution of Phase Composition and Microstructure upon Synthesis of Zr—Sn Alloy from Zirconium Hydride and Tin Powders
von: Savvakin, D.G., et al.
Veröffentlicht: (2015)
von: Savvakin, D.G., et al.
Veröffentlicht: (2015)
Influence of Phase Composition and Microstructure on Mechanical Behaviour of the Metastable Ti—3Al—4.5Fe—7.2Cr and VT22 Titanium β-Alloys under Tension with Different Rates
von: Markovsky, P.E., et al.
Veröffentlicht: (2016)
von: Markovsky, P.E., et al.
Veröffentlicht: (2016)
Microstructure anisotropy of nanocrystalline titanium produced by cryomechanical grain fragmentation
von: Ju. M. Pogribnaja, et al.
Veröffentlicht: (2018)
von: Ju. M. Pogribnaja, et al.
Veröffentlicht: (2018)
X-ray parameters of nanocrystalline microstructure titanium obtained by cryodeformation
von: Ju. M. Plotnikova, et al.
Veröffentlicht: (2016)
von: Ju. M. Plotnikova, et al.
Veröffentlicht: (2016)
Effect of microstructure, deformation mode and rate on mechanical behaviour of electron-beam melted Ti-6Al-4V and Ti-1.5Al-6.8Mo-4.5Fe alloys
von: O. M. Ivasishin, et al.
Veröffentlicht: (2018)
von: O. M. Ivasishin, et al.
Veröffentlicht: (2018)
Effect of titanium carbides on the formation of microstructure and improvement of mechanical characteristics of the weld metal
von: I. K. Pokhodnia, et al.
Veröffentlicht: (2018)
von: I. K. Pokhodnia, et al.
Veröffentlicht: (2018)
Microstructure and properties of multilayer materials on Ti–6Al–4V alloy base, produced by powder technology
von: O. M. Ivasishin, et al.
Veröffentlicht: (2018)
von: O. M. Ivasishin, et al.
Veröffentlicht: (2018)
Inorganic ion-exchange materials based on hydrated titanium dioxide as promising ionites for lithium ion removal
von: M. A. Tretjak, et al.
Veröffentlicht: (2013)
von: M. A. Tretjak, et al.
Veröffentlicht: (2013)
The influence of thermal treatment on microstructure and mechanical properties of Ti–Nb–Mo titanium alloys
von: O. M. Myslyvchenko, et al.
Veröffentlicht: (2020)
von: O. M. Myslyvchenko, et al.
Veröffentlicht: (2020)
Annealing Effect on the Microstructure and Mechanical Properties of a Thin Titanium Nitride Film
von: Her, S.C., et al.
Veröffentlicht: (2014)
von: Her, S.C., et al.
Veröffentlicht: (2014)
Annealing Effect on the Microstructure and Mechanical Properties of a Thin Titanium Nitride Film
von: S. C. Her, et al.
Veröffentlicht: (2014)
von: S. C. Her, et al.
Veröffentlicht: (2014)
Effect of misrostructural features on corrosion resistance of titanium alloys produced by powder technologies
von: I. M. Pohreliuk, et al.
Veröffentlicht: (2020)
von: I. M. Pohreliuk, et al.
Veröffentlicht: (2020)
Evolution of Phase Composition and Microstructure upon Synthesis of Zr—Sn Alloy from Zirconium Hydride and Tin Powders
von: D. G. Savvakin, et al.
Veröffentlicht: (2015)
von: D. G. Savvakin, et al.
Veröffentlicht: (2015)
The evolution of microstructure of the BT1-0 titanium alloy surface layer under solid solution strengthening
von: V. M. Fedirko, et al.
Veröffentlicht: (2012)
von: V. M. Fedirko, et al.
Veröffentlicht: (2012)
Microstructure and mechanical properties of parts from high-strength titanium alloys produced by waam method (Review)
von: R. V. Selin, et al.
Veröffentlicht: (2021)
von: R. V. Selin, et al.
Veröffentlicht: (2021)
The influence of vibration under protective layer application on its microstructure and impact-abrasive wear
von: H. V. Pokhmurska, et al.
Veröffentlicht: (2015)
von: H. V. Pokhmurska, et al.
Veröffentlicht: (2015)
Microstructure and properties of aluminum composites with carbide-containing master alloy and titanium carbide prepared by hot-forging
von: Yu. O. Shyshkina, et al.
Veröffentlicht: (2018)
von: Yu. O. Shyshkina, et al.
Veröffentlicht: (2018)
On the role of hydrogen in sintering of titanium powders
von: D. H. Savvakin, et al.
Veröffentlicht: (2011)
von: D. H. Savvakin, et al.
Veröffentlicht: (2011)
Investigation of K2ZrF6 and titanium nitride effect on silicon microstructure in hypereutectic silumin KS740
von: V. H. Mohylatenko, et al.
Veröffentlicht: (2015)
von: V. H. Mohylatenko, et al.
Veröffentlicht: (2015)
Promising Areas of IT Development in the World
von: Ye. Khaustova, et al.
Veröffentlicht: (2022)
von: Ye. Khaustova, et al.
Veröffentlicht: (2022)
Synthesis of zirconium and titanium-base alloys using hydrides of corresponding metals
von: O. M. Ivasyshyn, et al.
Veröffentlicht: (2015)
von: O. M. Ivasyshyn, et al.
Veröffentlicht: (2015)
Features of Phase Formation at Controlled Hydrogenation and Dehydrogenation of Titanium by Different Methods
von: A. I. Dekhtjar, et al.
Veröffentlicht: (2014)
von: A. I. Dekhtjar, et al.
Veröffentlicht: (2014)
Promising types of coatings for PCBN tools
von: A. S. Manokhin, et al.
Veröffentlicht: (2018)
von: A. S. Manokhin, et al.
Veröffentlicht: (2018)
Formation of microstructure and mechanical properties of VT22 titanium alloy in non-equilibrium conditions of rapid thermal treatment
von: O. M. Ivasyshyn, et al.
Veröffentlicht: (2015)
von: O. M. Ivasyshyn, et al.
Veröffentlicht: (2015)
Microstructure of VT20 titanium alloys produced by method of layer-by-layer electron beam fusion using domestic powder materials
von: V. M. Nesterenkov, et al.
Veröffentlicht: (2019)
von: V. M. Nesterenkov, et al.
Veröffentlicht: (2019)
New approach for manufacturing Ti–6Al–4V+40%TiC metalmatrix composites by 3D printing using conic electron beam and cored wire. Pt. 1: Main features of the process, microstructure formation and basic characteristics of 3D printed material
von: P. E. Markovsky, et al.
Veröffentlicht: (2023)
von: P. E. Markovsky, et al.
Veröffentlicht: (2023)
Blockchain for finance and banking: problems of formation and promises
von: D. V. Lipnitskij
Veröffentlicht: (2019)
von: D. V. Lipnitskij
Veröffentlicht: (2019)
An outstanding personality of titanium science (to the 75th anniversary of Academician of NAS of Ukraine O.M. Ivasyshyn)
von: Ye. Markovskyi, et al.
Veröffentlicht: (2021)
von: Ye. Markovskyi, et al.
Veröffentlicht: (2021)
Present-day and promising technologies of coal mining
von: Shraiber O.A., et al.
Veröffentlicht: (2008)
von: Shraiber O.A., et al.
Veröffentlicht: (2008)
Microstructure of titanium alloys produced by the method of layered electron beam surfacing using the wire of grade Ti6AI4V
von: V. M. Nesterenkov, et al.
Veröffentlicht: (2020)
von: V. M. Nesterenkov, et al.
Veröffentlicht: (2020)
Clinotron: a Promising Source for THz Regions
von: Manzhos, S., et al.
Veröffentlicht: (2013)
von: Manzhos, S., et al.
Veröffentlicht: (2013)
Tensile Deformation and Fracture of α+β-Titanium Alloys Synthesized by Powder Metallurgy
von: A. I. Dekhtjar, et al.
Veröffentlicht: (2013)
von: A. I. Dekhtjar, et al.
Veröffentlicht: (2013)
Formation of Biomimetic Hydroxyapatite on a Surface of Titanium
von: A. L. Petranovskaja, et al.
Veröffentlicht: (2013)
von: A. L. Petranovskaja, et al.
Veröffentlicht: (2013)
Brazing as a Promising Method of Producing Permanent Joints
von: S. V. Maksymova
Veröffentlicht: (2020)
von: S. V. Maksymova
Veröffentlicht: (2020)
Justification of Promising Areas for the Development of the Manufacturing Industry in Ukraine
von: M. O. Kyzym, et al.
Veröffentlicht: (2019)
von: M. O. Kyzym, et al.
Veröffentlicht: (2019)
Zr—Nb-Based Alloys–Promising Functional Materials
von: S. N. Kedrovskij, et al.
Veröffentlicht: (2014)
von: S. N. Kedrovskij, et al.
Veröffentlicht: (2014)
Ähnliche Einträge
-
Microstructure and properties of titanium-based materials promising for antiballistic protection
von: O. M. Ivasishin, et al.
Veröffentlicht: (2019) -
Additive manufacturing of titanium-based materials using electron beam wire 3D printing approach: peculiarities, advantages, and prospects
von: O. M. Ivasishin, et al.
Veröffentlicht: (2023) -
New promising titanium-based alloys
von: S. V. Akhonin, et al.
Veröffentlicht: (2019) -
Effect of microstructure, deformation mode and rate on mechanical behaviour of electron-beam melted Ti-6Al-4V and Ti-1.5Al-6.8Mo-4.5Fe alloys
von: Ivasishin, O.M., et al.
Veröffentlicht: (2018) -
Evolution of Phase Composition and Microstructure upon Synthesis of Zr—Sn Alloy from Zirconium Hydride and Tin Powders
von: Savvakin, D.G., et al.
Veröffentlicht: (2015)