Analysis of the Contact Stresses in Curvic Couplings of Gas Turbine in a Blade-Off Event
The contact pressure distribution of the curvic couplings in a heavy duty gas turbine under a blade-off load condition is investigated in a three-dimensional finite element model. Several blade-off positions on each stage disc may develop the different characters on the contact pressure distribution...
Gespeichert in:
| Veröffentlicht in: | Проблемы прочности |
|---|---|
| Datum: | 2012 |
| Hauptverfasser: | Jiang, X.-J., Zhang, Y.-Y., Yuan, S.-X. |
| Format: | Artikel |
| Sprache: | Englisch |
| Veröffentlicht: |
Інститут проблем міцності ім. Г.С. Писаренко НАН України
2012
|
| Schlagworte: | |
| Online Zugang: | https://nasplib.isofts.kiev.ua/handle/123456789/173086 |
| Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
| Назва журналу: | Digital Library of Periodicals of National Academy of Sciences of Ukraine |
| Zitieren: | Analysis of the Contact Stresses in Curvic Couplings of Gas Turbine in a Blade-Off Event / X.-J. Jiang, Y.-Y. Zhang, S.-X. Yuan // Проблемы прочности. — 2012. — № 5. — С. 105-119. — Бібліогр.: 8 назв. — англ. |
Institution
Digital Library of Periodicals of National Academy of Sciences of UkraineÄhnliche Einträge
Untitled
von: X.-J. Jiang, et al.
Veröffentlicht: (2012)
von: X.-J. Jiang, et al.
Veröffentlicht: (2012)
Numerical Simulation-Based Optimization of Contact Stress Distribution and Lubrication Conditions in the Straight Worm Drive
von: He, Y., et al.
Veröffentlicht: (2018)
von: He, Y., et al.
Veröffentlicht: (2018)
The analysis of the damage blades of gas-turbine engines
von: Ju. S. Nalimov
Veröffentlicht: (2014)
von: Ju. S. Nalimov
Veröffentlicht: (2014)
Modal Analysis of the Turbine Blade at Complex Thermomechanical Loads
von: Witek, L., et al.
Veröffentlicht: (2016)
von: Witek, L., et al.
Veröffentlicht: (2016)
Numerical Simulation of the Inlet/Outlet Pressure Ratio Effect on the Heat Transfer Coefficient in an Air Turbine Cascade
von: He, Z., et al.
Veröffentlicht: (2019)
von: He, Z., et al.
Veröffentlicht: (2019)
Application of radiation processes for testing of gas turbine blades
von: Bazaleev, M.I., et al.
Veröffentlicht: (2019)
von: Bazaleev, M.I., et al.
Veröffentlicht: (2019)
Stress Distribution Behavior in Single-Lap Adhesively Bonded Beams
von: He, X., et al.
Veröffentlicht: (2014)
von: He, X., et al.
Veröffentlicht: (2014)
The stress-strain state of the lock joint of the operating blades of the turbine
von: Шульженко, Н. Г., et al.
Veröffentlicht: (2013)
von: Шульженко, Н. Г., et al.
Veröffentlicht: (2013)
The stress-strain state of the lock joint of the operating blades of the turbine
von: Шульженко, Н. Г., et al.
Veröffentlicht: (2013)
von: Шульженко, Н. Г., et al.
Veröffentlicht: (2013)
The stress-strain state of the lock joint of the operating blades of the turbine
von: N. G. Shulzhenko, et al.
Veröffentlicht: (2013)
von: N. G. Shulzhenko, et al.
Veröffentlicht: (2013)
Coupled Effects of Strain Rate and Temperature on Deformation Twinning in Cu-Zn Alloy
von: Zhou, P., et al.
Veröffentlicht: (2016)
von: Zhou, P., et al.
Veröffentlicht: (2016)
Comparative Analysis of Crack Resistance of Fiber Metal Laminates with HS2 Glass/T700 Carbon Layers for Various Stress Ratios
von: Song, X., et al.
Veröffentlicht: (2016)
von: Song, X., et al.
Veröffentlicht: (2016)
Thermomechanical Coupling Model for a Stainless Steel-Clad Plate on Heat Treatment
von: Guan, B., et al.
Veröffentlicht: (2019)
von: Guan, B., et al.
Veröffentlicht: (2019)
Improvement of heat-resistance of the coating for gas-turbine engine blades
von: S. G. Rudenkij, et al.
Veröffentlicht: (2019)
von: S. G. Rudenkij, et al.
Veröffentlicht: (2019)
Residual Strains of Filter Materials Reinforced with Grid Inclusions under Cyclic Loading
von: Lin, Y.L., et al.
Veröffentlicht: (2015)
von: Lin, Y.L., et al.
Veröffentlicht: (2015)
Vibrational Stresses of Damaged Steam Turbine Blades After Renovation Repair
von: Шульженко, Н. Г., et al.
Veröffentlicht: (2021)
von: Шульженко, Н. Г., et al.
Veröffentlicht: (2021)
Vibrational Stresses of Damaged Steam Turbine Blades After Renovation Repair
von: Шульженко, Н. Г., et al.
Veröffentlicht: (2021)
von: Шульженко, Н. Г., et al.
Veröffentlicht: (2021)
Vibrational Stresses of Damaged Steam Turbine Blades After Renovation Repair
von: M. H. Shulzhenko, et al.
Veröffentlicht: (2021)
von: M. H. Shulzhenko, et al.
Veröffentlicht: (2021)
Surface strain-hardening of the blades of gas-turbine engines in an ultrasonic field
von: Yatsenko, V.K., et al.
Veröffentlicht: (1985)
von: Yatsenko, V.K., et al.
Veröffentlicht: (1985)
Features of organization of film cooling of high temperature gas turbines blades
von: A. A. Khalatov, et al.
Veröffentlicht: (2017)
von: A. A. Khalatov, et al.
Veröffentlicht: (2017)
Structural-mechanical properties of nickel alloy of gas turbine engine blades
von: Yu. H. Kvasnytska, et al.
Veröffentlicht: (2021)
von: Yu. H. Kvasnytska, et al.
Veröffentlicht: (2021)
Improving the performance of working blades of modern industrial gas turbine engines
von: Ju. G. Kvasnitskaja
Veröffentlicht: (2015)
von: Ju. G. Kvasnitskaja
Veröffentlicht: (2015)
Features of the rolling-off of hollow shafts of gas turbine engines under conditions of superplasticity
von: F. Z. Utjashev, et al.
Veröffentlicht: (2015)
von: F. Z. Utjashev, et al.
Veröffentlicht: (2015)
Residual stresses and mechanical properties of turbine blades after laser treatment of surface
von: Ja. Dzjankhua, et al.
Veröffentlicht: (2010)
von: Ja. Dzjankhua, et al.
Veröffentlicht: (2010)
Dynamic Stress Analysis of a Composite Electromagnetic Track
von: Tian, Z.G., et al.
Veröffentlicht: (2018)
von: Tian, Z.G., et al.
Veröffentlicht: (2018)
Evaluation of Metal-Active Gas Double-Sided Double-Power Arc Welded Joints of High-Strength Low-Alloy Steel
von: Chen, Y.X., et al.
Veröffentlicht: (2015)
von: Chen, Y.X., et al.
Veröffentlicht: (2015)
Measurement of temperature of molten zone at the directional crystallization of blades of the gas-turbine engine
von: M. O. Markin, et al.
Veröffentlicht: (2017)
von: M. O. Markin, et al.
Veröffentlicht: (2017)
Measurement of temperature of molten zone at the directional crystallization of blades of the gas-turbine engine
von: Markin, M.O., et al.
Veröffentlicht: (2017)
von: Markin, M.O., et al.
Veröffentlicht: (2017)
Changes in the Thermal and Stress-Strain State of the HPC Rotor of a Powerful NPP Turbine after the Blades Damage
von: O. Y. Chernousenko, et al.
Veröffentlicht: (2023)
von: O. Y. Chernousenko, et al.
Veröffentlicht: (2023)
Simulation of the Spindle Coupled Multi-Axial Loading Fatigue Test of a Rear Axle
von: Dong, Z., et al.
Veröffentlicht: (2017)
von: Dong, Z., et al.
Veröffentlicht: (2017)
Contacts for silicon IMPATT and pick-off diodes
von: Boltovets, N.S., et al.
Veröffentlicht: (2000)
von: Boltovets, N.S., et al.
Veröffentlicht: (2000)
Numerical Simulation of Fatigue Damage and Shape Instability Behavior of Steel 40Cr by the Damage-Coupled Crystal Plastic Model
von: Wu, G.C., et al.
Veröffentlicht: (2017)
von: Wu, G.C., et al.
Veröffentlicht: (2017)
Testing of gas-turbine blades engines using the accelerator of high current relativistic electrons
von: Ye. Donets, et al.
Veröffentlicht: (2020)
von: Ye. Donets, et al.
Veröffentlicht: (2020)
Experimental Study on the Coaxing Effect of Multi-Level Stresses with Different Sequences
von: Zhao, L.H., et al.
Veröffentlicht: (2017)
von: Zhao, L.H., et al.
Veröffentlicht: (2017)
Optimization of Photoelastic Properties and Stress Relief of Small-Sized Polycarbonate Disks for Granular Material Photoelastic Tests
von: Hou, M.X., et al.
Veröffentlicht: (2018)
von: Hou, M.X., et al.
Veröffentlicht: (2018)
Investigations of the structural features of a high-temperature nickel alloy for gas turbine engine blades
von: Yu. H. Kvasnytska, et al.
Veröffentlicht: (2023)
von: Yu. H. Kvasnytska, et al.
Veröffentlicht: (2023)
Phase and structural stability of high-temperature corrosion resistant alloy for cast blades of gas turbines
von: A. M. Verkhovliuk, et al.
Veröffentlicht: (2016)
von: A. M. Verkhovliuk, et al.
Veröffentlicht: (2016)
Industrial technology of deposition of two-layer plasma heat-protective coatings on gas turbine blades
von: V. A. Akrymov, et al.
Veröffentlicht: (2020)
von: V. A. Akrymov, et al.
Veröffentlicht: (2020)
Effect of Braiding Angle on the Impact and Post-Impact Behavior of 3D Braided Composites
von: Yan, S., et al.
Veröffentlicht: (2017)
von: Yan, S., et al.
Veröffentlicht: (2017)
Bending Performance of Steel/CFRP Plate-Reinforced Core Timber Beams
von: Xiong, X.Y., et al.
Veröffentlicht: (2017)
von: Xiong, X.Y., et al.
Veröffentlicht: (2017)
Ähnliche Einträge
-
Untitled
von: X.-J. Jiang, et al.
Veröffentlicht: (2012) -
Numerical Simulation-Based Optimization of Contact Stress Distribution and Lubrication Conditions in the Straight Worm Drive
von: He, Y., et al.
Veröffentlicht: (2018) -
The analysis of the damage blades of gas-turbine engines
von: Ju. S. Nalimov
Veröffentlicht: (2014) -
Modal Analysis of the Turbine Blade at Complex Thermomechanical Loads
von: Witek, L., et al.
Veröffentlicht: (2016) -
Numerical Simulation of the Inlet/Outlet Pressure Ratio Effect on the Heat Transfer Coefficient in an Air Turbine Cascade
von: He, Z., et al.
Veröffentlicht: (2019)