Application of the Point Stress Criterion to Assess the Bond Strength of a Single-Lap Joint
Finite element analysis has been carried out to obtain the interfacial stresses in a single lap joint using a special 6-node isoparametric element for adhesive layer. The analysis results are found to be in good agreement with the closedform solution of Goland and Reissner. The peak normal and shear...
Gespeichert in:
| Veröffentlicht in: | Проблемы прочности |
|---|---|
| Datum: | 2014 |
| Hauptverfasser: | Sajikumar, K.S., Asok Kumar, N., Nageswara Rao, B. |
| Format: | Artikel |
| Sprache: | Englisch |
| Veröffentlicht: |
Інститут проблем міцності ім. Г.С. Писаренко НАН України
2014
|
| Schlagworte: | |
| Online Zugang: | https://nasplib.isofts.kiev.ua/handle/123456789/173125 |
| Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
| Назва журналу: | Digital Library of Periodicals of National Academy of Sciences of Ukraine |
| Zitieren: | Application of the Point Stress Criterion to Assess the Bond Strength of a Single-Lap Joint / K.S. Sajikumar, N. Asok Kumar, B. Nageswara Rao // Проблемы прочности. — 2014. — № 4. — С. 92-101. — Бібліогр.: 45 назв. — англ. |
Institution
Digital Library of Periodicals of National Academy of Sciences of UkraineÄhnliche Einträge
Stress Distribution Behavior in Single-Lap Adhesively Bonded Beams
von: He, X., et al.
Veröffentlicht: (2014)
von: He, X., et al.
Veröffentlicht: (2014)
Untitled
von: K. S. Sajikumar, et al.
Veröffentlicht: (2014)
von: K. S. Sajikumar, et al.
Veröffentlicht: (2014)
A Ductile Tear Fracture Analysis of Lap Welded Joints
von: Imad, A., et al.
Veröffentlicht: (2004)
von: Imad, A., et al.
Veröffentlicht: (2004)
The criterion of relative power and the flexural-strength approach in the interpretation of the folding of a single layer
von: Gonchar, V. V.
Veröffentlicht: (2010)
von: Gonchar, V. V.
Veröffentlicht: (2010)
Assessment of contact strength of bolted joints of composite plates
von: Ya. L. Ivanytskyi, et al.
Veröffentlicht: (2019)
von: Ya. L. Ivanytskyi, et al.
Veröffentlicht: (2019)
Energetic GTE parameters identification at the stage of lapping works
von: Тарелин, Анатолий Алексеевич, et al.
Veröffentlicht: (2015)
von: Тарелин, Анатолий Алексеевич, et al.
Veröffentlicht: (2015)
Energetic GTE parameters identification at the stage of lapping works
von: Тарелин, Анатолий Алексеевич, et al.
Veröffentlicht: (2015)
von: Тарелин, Анатолий Алексеевич, et al.
Veröffentlicht: (2015)
Energetic GTE parameters identification at the stage of lapping works
von: A. A. Tarelin, et al.
Veröffentlicht: (2015)
von: A. A. Tarelin, et al.
Veröffentlicht: (2015)
Integrodifferential criterion of the strength of aging polymers
von: Buryachenko, V.A., et al.
Veröffentlicht: (1985)
von: Buryachenko, V.A., et al.
Veröffentlicht: (1985)
Homotopical criterion of point mapping
von: Kompaniets, V. P., et al.
Veröffentlicht: (1966)
von: Kompaniets, V. P., et al.
Veröffentlicht: (1966)
Mechanical Properties of Dissimilar A356/SAPH440 Lap Joints by the Friction Stir Spot Welding and Self-Piercing Riveting
von: Bang, Han Sur, et al.
Veröffentlicht: (2018)
von: Bang, Han Sur, et al.
Veröffentlicht: (2018)
Fatigue resistance of steel welded joints of different strength with final residual stresses
von: V. A. Degtjarev
Veröffentlicht: (2018)
von: V. A. Degtjarev
Veröffentlicht: (2018)
Statistical analysis of compression strength of single grains of SHM powders and improvement of the strength assessment procedure
von: Ju. V. Sirota, et al.
Veröffentlicht: (2013)
von: Ju. V. Sirota, et al.
Veröffentlicht: (2013)
The search criterion of singularity points of R-functions
von: Чопоров, С. В., et al.
Veröffentlicht: (2016)
von: Чопоров, С. В., et al.
Veröffentlicht: (2016)
The search criterion of singularity points of R-functions
von: Чопоров, С. В., et al.
Veröffentlicht: (2016)
von: Чопоров, С. В., et al.
Veröffentlicht: (2016)
The search criterion of singularity points of R-functions
von: S. V. Choporov, et al.
Veröffentlicht: (2011)
von: S. V. Choporov, et al.
Veröffentlicht: (2011)
Laser Beam Surface Pretreatment for the Adhesive Bond Strength Improvement
von: Ciecińska, B.
Veröffentlicht: (2016)
von: Ciecińska, B.
Veröffentlicht: (2016)
Fracture Assessment of the Weld–Base Metal Interface of High-Strength Steel Weld Joint
von: Zhong, Z.P., et al.
Veröffentlicht: (2018)
von: Zhong, Z.P., et al.
Veröffentlicht: (2018)
Method of the shortcut estimation of rails reliability by the fatigue strength criterion
von: Sosnovskii, L.A., et al.
Veröffentlicht: (2009)
von: Sosnovskii, L.A., et al.
Veröffentlicht: (2009)
Cyclic strength of damaged tee joint
von: P. S. Jukhimets, et al.
Veröffentlicht: (2015)
von: P. S. Jukhimets, et al.
Veröffentlicht: (2015)
Nonlinearity of the Rock Joint Shear Strength
von: Wei, Y.F., et al.
Veröffentlicht: (2015)
von: Wei, Y.F., et al.
Veröffentlicht: (2015)
The influence of basic technological parameters on the layers bonding strength of the bimetal aluminum-copper
von: V. G. Zagorjanskij
Veröffentlicht: (2014)
von: V. G. Zagorjanskij
Veröffentlicht: (2014)
Bond Strength Deterioration of Reinforced and Prestressed Concrete Members at Reversed Cyclic Loads
von: Lee, J.-Y., et al.
Veröffentlicht: (2015)
von: Lee, J.-Y., et al.
Veröffentlicht: (2015)
Structural criteria of strength and crack resistance of high-strength steels and their welded joints
von: O. M. Berdnikova
Veröffentlicht: (2021)
von: O. M. Berdnikova
Veröffentlicht: (2021)
The influence of welding energy on strength of high-strength S960QC steel joints
von: I. R. Dzioba, et al.
Veröffentlicht: (2019)
von: I. R. Dzioba, et al.
Veröffentlicht: (2019)
Effect of a Lap on Deformation of Elastic Plate with an End Cut under Action of Shock Wave
von: I. I. Anikev, et al.
Veröffentlicht: (2014)
von: I. I. Anikev, et al.
Veröffentlicht: (2014)
Determination of zones of additional control of metal and welded joints of steam generators PGV-213 at strength assessment
von: V. M. Torop, et al.
Veröffentlicht: (2013)
von: V. M. Torop, et al.
Veröffentlicht: (2013)
Points of joint continuity and large oscillations
von: Maslyuchenko, V. K., et al.
Veröffentlicht: (2010)
von: Maslyuchenko, V. K., et al.
Veröffentlicht: (2010)
Investigation of joints of titanium aluminide with titanium alloy VTV, made by diffusion bonding
von: V. F. Gorban, et al.
Veröffentlicht: (2009)
von: V. F. Gorban, et al.
Veröffentlicht: (2009)
Strength and specifics of fracture of welded joints of high-strength aluminium alloys at low temperature
von: T. M. Labur
Veröffentlicht: (2011)
von: T. M. Labur
Veröffentlicht: (2011)
Chemical bond deviation in group VI hydrids
von: Okhrimenko, B.A., et al.
Veröffentlicht: (2013)
von: Okhrimenko, B.A., et al.
Veröffentlicht: (2013)
Evaluation of strength of joints produced by welding with concurrent brazing
von: V. I. Savuljak, et al.
Veröffentlicht: (2015)
von: V. I. Savuljak, et al.
Veröffentlicht: (2015)
Deformation criterion of effectiveness of welded joint strengthening by high-frequency mechanical peening
von: V. A. Degtjarev, et al.
Veröffentlicht: (2009)
von: V. A. Degtjarev, et al.
Veröffentlicht: (2009)
Barbell strategy with bond portfolios: theory review and empirical study with government bond portfolios of Vietnam Prosperity Joint Stock Commercial Bank in 2018
von: D. H. Linh, et al.
Veröffentlicht: (2018)
von: D. H. Linh, et al.
Veröffentlicht: (2018)
Development of plastic strips from an angular point of rigidly bonded materials interface
von: A. O. Kaminskyi, et al.
Veröffentlicht: (2016)
von: A. O. Kaminskyi, et al.
Veröffentlicht: (2016)
Quantification of the Influence of Residual Stresses on Fatigue Strength of Al-Alloy Welded Joints by Means of the Local Strain Energy Density Approach
von: Ferro, P., et al.
Veröffentlicht: (2016)
von: Ferro, P., et al.
Veröffentlicht: (2016)
Effect of impact treatment of weld metal on strength of welded joint
von: A. S. Pismennyj, et al.
Veröffentlicht: (2010)
von: A. S. Pismennyj, et al.
Veröffentlicht: (2010)
Strength of Lock Joint of Turbine Blades under High Temperatures
von: M. H. Shulzhenko, et al.
Veröffentlicht: (2023)
von: M. H. Shulzhenko, et al.
Veröffentlicht: (2023)
Investigation of influence of plasticity materials on tensile strength of the composite joint
von: M. V. Dudyk, et al.
Veröffentlicht: (2013)
von: M. V. Dudyk, et al.
Veröffentlicht: (2013)
Physico-mechanical properties of welded joints of high-strength steel with the yield strength of 690…1300 MPa
von: O. M. Berdnikova
Veröffentlicht: (2021)
von: O. M. Berdnikova
Veröffentlicht: (2021)
Ähnliche Einträge
-
Stress Distribution Behavior in Single-Lap Adhesively Bonded Beams
von: He, X., et al.
Veröffentlicht: (2014) -
Untitled
von: K. S. Sajikumar, et al.
Veröffentlicht: (2014) -
A Ductile Tear Fracture Analysis of Lap Welded Joints
von: Imad, A., et al.
Veröffentlicht: (2004) -
The criterion of relative power and the flexural-strength approach in the interpretation of the folding of a single layer
von: Gonchar, V. V.
Veröffentlicht: (2010) -
Assessment of contact strength of bolted joints of composite plates
von: Ya. L. Ivanytskyi, et al.
Veröffentlicht: (2019)