Stress Distribution Behavior in Single-Lap Adhesively Bonded Beams
In the present work, the stress distribution along the total single-lap adhesively bonded beam has been investigated using the 3D finite element (FE) method. Specifically, FE solutions of the stress distributions in the bonded section have been obtained for four typical characteristics of adhesives....
Saved in:
| Published in: | Проблемы прочности |
|---|---|
| Date: | 2014 |
| Main Authors: | He, X., Wang, Y. |
| Format: | Article |
| Language: | English |
| Published: |
Інститут проблем міцності ім. Г.С. Писаренко НАН України
2014
|
| Subjects: | |
| Online Access: | https://nasplib.isofts.kiev.ua/handle/123456789/173214 |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Journal Title: | Digital Library of Periodicals of National Academy of Sciences of Ukraine |
| Cite this: | Stress Distribution Behavior in Single-Lap Adhesively Bonded Beams / X. He, Y. Wang // Проблемы прочности. — 2014. — № 6. — С. 123-135. — Бібліогр.: 7 назв. — англ. |
Institution
Digital Library of Periodicals of National Academy of Sciences of UkraineSimilar Items
Application of the Point Stress Criterion to Assess the Bond Strength of a Single-Lap Joint
by: Sajikumar, K.S., et al.
Published: (2014)
by: Sajikumar, K.S., et al.
Published: (2014)
Laser Beam Surface Pretreatment for the Adhesive Bond Strength Improvement
by: Ciecińska, B.
Published: (2016)
by: Ciecińska, B.
Published: (2016)
A Ductile Tear Fracture Analysis of Lap Welded Joints
by: Imad, A., et al.
Published: (2004)
by: Imad, A., et al.
Published: (2004)
Analytical Analysis of the Interfacial Stress in Damaged Reinforced Concrete Beams Strengthened by Bonded Composite Plates
by: Hassaine Daouadji, T.
Published: (2013)
by: Hassaine Daouadji, T.
Published: (2013)
Influence of Nanoalumina Particles on the Static and High-Cycle Fatigue Properties of Peel-Loaded Adhesive-Bonded Joints
by: Kubita, A., et al.
Published: (2016)
by: Kubita, A., et al.
Published: (2016)
Predictive Performance of Artificial Neural Network and Multiple Linear Regression Models in Predicting Adhesive Bonding Strength of Wood
by: Bardak, S., et al.
Published: (2016)
by: Bardak, S., et al.
Published: (2016)
Mechanical Properties of Dissimilar A356/SAPH440 Lap Joints by the Friction Stir Spot Welding and Self-Piercing Riveting
by: Bang, Han Sur, et al.
Published: (2018)
by: Bang, Han Sur, et al.
Published: (2018)
Numerical Simulation-Based Optimization of Contact Stress Distribution and Lubrication Conditions in the Straight Worm Drive
by: He, Y., et al.
Published: (2018)
by: He, Y., et al.
Published: (2018)
Bending Performance of Steel/CFRP Plate-Reinforced Core Timber Beams
by: Xiong, X.Y., et al.
Published: (2017)
by: Xiong, X.Y., et al.
Published: (2017)
Surface Strengthening Behavior of Magnesium Alloy with Laser Thermal Loading under Rapid Cooling
by: Ge, Y.Q., et al.
Published: (2018)
by: Ge, Y.Q., et al.
Published: (2018)
Numerical Simulation of the Damage Behavior of a Concrete Beam with an Anisotropic Damage Model
by: Long, Y.C., et al.
Published: (2018)
by: Long, Y.C., et al.
Published: (2018)
Effect of Double-Atom Vacancy Defects on the Elastic Properties of Single-Layered Graphene Sheets
by: Wang, Z.Q., et al.
Published: (2017)
by: Wang, Z.Q., et al.
Published: (2017)
Study on Thermal Stress of Honeycomb Ceramic Regenerators with Different Parameters
by: Wang, Y.X., et al.
Published: (2014)
by: Wang, Y.X., et al.
Published: (2014)
A Numerical Study of the Flexural Behavior of Concrete Beams Reinforced with AFRP Bars
by: Buyukkaragoz, A., et al.
Published: (2013)
by: Buyukkaragoz, A., et al.
Published: (2013)
Study on a Cracked Single-Layer 2D Woven Composite Plate: Fracture Mode and Damage Analysis
by: Wang, Y.Q., et al.
Published: (2018)
by: Wang, Y.Q., et al.
Published: (2018)
Mechanical Properties of GF/pCBT Composites and Their Fusion-Bonded Joints: Influence of Process Parameters
by: Zhang, L., et al.
Published: (2015)
by: Zhang, L., et al.
Published: (2015)
Compression Deformation Behavior and Processing Map of Pure Copper
by: Huang, S.H., et al.
Published: (2016)
by: Huang, S.H., et al.
Published: (2016)
Numerical Simulation of Fatigue Damage and Shape Instability Behavior of Steel 40Cr by the Damage-Coupled Crystal Plastic Model
by: Wu, G.C., et al.
Published: (2017)
by: Wu, G.C., et al.
Published: (2017)
Analysis of the Contact Stresses in Curvic Couplings of Gas Turbine in a Blade-Off Event
by: Jiang, X.-J., et al.
Published: (2012)
by: Jiang, X.-J., et al.
Published: (2012)
FEM Analysis of Stress Distribution in the Hermetic Harmonic Drive Flexspline
by: Pacana, J., et al.
Published: (2017)
by: Pacana, J., et al.
Published: (2017)
Dynamic Stress Intensity Factor for Interfacial Cracks of Mode III Emanating from Circular Cavities in Piezoelectric Bimaterials
by: Li, D., et al.
Published: (2016)
by: Li, D., et al.
Published: (2016)
Study on Non-Linear Flexural Behavior of Reinforced Concrete Beams Using ANSYS by Discrete Reinforcement Modeling
by: Vasudevan, G., et al.
Published: (2013)
by: Vasudevan, G., et al.
Published: (2013)
Numerical Simulation and Experimental Study on the Interface Bonding of Stainless Steel Clad Plate
by: Jin, H.R., et al.
Published: (2018)
by: Jin, H.R., et al.
Published: (2018)
Bond Strength Deterioration of Reinforced and Prestressed Concrete Members at Reversed Cyclic Loads
by: Lee, J.-Y., et al.
Published: (2015)
by: Lee, J.-Y., et al.
Published: (2015)
Dynamic Stress Analysis of a Composite Electromagnetic Track
by: Tian, Z.G., et al.
Published: (2018)
by: Tian, Z.G., et al.
Published: (2018)
Non-Monotonous Mechanical Behavior at the Nanoscale: Elastic and Plastic Properties
by: Zhang, X., et al.
Published: (2015)
by: Zhang, X., et al.
Published: (2015)
Friction and Wear Behavior of Wear-Resistant Belts in Drill Joints for Deep and Ultra-Deep Wells
by: Zhang, K., et al.
Published: (2018)
by: Zhang, K., et al.
Published: (2018)
Optimum Failure-Censored Step-Stress Life Test Plans for the Lomax Distribution
by: Ismail, Ali A.
Published: (2016)
by: Ismail, Ali A.
Published: (2016)
Coupled Deformation and Diffusion Process at the Stainless Steel/Carbon Steel Interface in the Deformation Bonding Process
by: Li, S., et al.
Published: (2018)
by: Li, S., et al.
Published: (2018)
Effect of Braiding Angle on the Impact and Post-Impact Behavior of 3D Braided Composites
by: Yan, S., et al.
Published: (2017)
by: Yan, S., et al.
Published: (2017)
Prediction of a High Temperature Bonding Condition at the Interface for the Hot-Rolled Stainless Steel Clad Plate on Rolling
by: Guan, B., et al.
Published: (2018)
by: Guan, B., et al.
Published: (2018)
On Designing Time-Censored Step-Stress Life Test for the Burr Type-XII Distribution
by: Ismail, Ali A., et al.
Published: (2017)
by: Ismail, Ali A., et al.
Published: (2017)
The Ultimate Tensile Strength of Coach Peel Self-Piercing Riveting Joints
by: He, X., et al.
Published: (2013)
by: He, X., et al.
Published: (2013)
The effect of damping and force application point on the non-linear dynamic behavior of a cracked beam at sub- and super-resonance vibrations
by: Bovsunovskii, A.P., et al.
Published: (2006)
by: Bovsunovskii, A.P., et al.
Published: (2006)
A Probabilistic Model for Describing Short Fatigue Crack Growth Behavior of LZ50 Steel
by: Yang, B., et al.
Published: (2016)
by: Yang, B., et al.
Published: (2016)
Investigation of Cold Rolling Influence on near Surface Residual Stress Distribution in Explosive Welded Multilayer
by: Sedighi, M., et al.
Published: (2012)
by: Sedighi, M., et al.
Published: (2012)
Optimal Design of Failure-Censored Constant-Stress Life Test Plans for the Inverse Weibull Distribution
by: Ismaila, Ali A., et al.
Published: (2019)
by: Ismaila, Ali A., et al.
Published: (2019)
Study of Bond Properties of Steel Rebars with Recycled Aggregate Concrete. Analytical Modeling
by: Rafi, M.M.
Published: (2019)
by: Rafi, M.M.
Published: (2019)
Study of Bond Properties of Steel Rebars with Recycled Aggregate Concrete. Experimental Testing
by: Rafi, M.M.
Published: (2018)
by: Rafi, M.M.
Published: (2018)
Surface Treatment with the Cold Roll Bonding Process for an Aluminum Alloy and Mild Steel
by: Tang, C., et al.
Published: (2015)
by: Tang, C., et al.
Published: (2015)
Similar Items
-
Application of the Point Stress Criterion to Assess the Bond Strength of a Single-Lap Joint
by: Sajikumar, K.S., et al.
Published: (2014) -
Laser Beam Surface Pretreatment for the Adhesive Bond Strength Improvement
by: Ciecińska, B.
Published: (2016) -
A Ductile Tear Fracture Analysis of Lap Welded Joints
by: Imad, A., et al.
Published: (2004) -
Analytical Analysis of the Interfacial Stress in Damaged Reinforced Concrete Beams Strengthened by Bonded Composite Plates
by: Hassaine Daouadji, T.
Published: (2013) -
Influence of Nanoalumina Particles on the Static and High-Cycle Fatigue Properties of Peel-Loaded Adhesive-Bonded Joints
by: Kubita, A., et al.
Published: (2016)