Simulation Based on Trivariate NURBS and Isogeometric Analysis of a Spur Gear
The approach provides simulation of the gear design with high-precision profile configuration parameters to accurately predict its load capacity and stress state, which requires incessant efforts, as gear failure modes depend largely on its profile representation. The finite element analysis (FEA) i...
Saved in:
| Published in: | Проблемы прочности |
|---|---|
| Date: | 2015 |
| Main Authors: | Yusuf, O.T., Gang, Z., Wei, W., Onuh, S.O. |
| Format: | Article |
| Language: | English |
| Published: |
Інститут проблем міцності ім. Г.С. Писаренко НАН України
2015
|
| Subjects: | |
| Online Access: | https://nasplib.isofts.kiev.ua/handle/123456789/173260 |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Journal Title: | Digital Library of Periodicals of National Academy of Sciences of Ukraine |
| Cite this: | Simulation Based on Trivariate NURBS and Isogeometric Analysis of a Spur Gear / O.T. Yusuf, Z. Gang, W. Wei, S.O. Onuh // Проблемы прочности. — 2015. — № 1. — С. 26-36. — Бібліогр.: 27 назв. — англ. |
Institution
Digital Library of Periodicals of National Academy of Sciences of UkraineSimilar Items
Finishing spur gears worm diamond elasticity hons
by: A. V. Krivosheja, et al.
Published: (2016)
by: A. V. Krivosheja, et al.
Published: (2016)
Vibration Analysis of a Low-Power Reduction Gear
by: Noga, S., et al.
Published: (2016)
by: Noga, S., et al.
Published: (2016)
An equivalent uniaxial fatigue stress model for analyzing landing gear fuse pins
by: Narayan, K., et al.
Published: (2006)
by: Narayan, K., et al.
Published: (2006)
Isogeometric spline reconstruction of plane curves
by: Nazarenko, N. A., et al.
Published: (2000)
by: Nazarenko, N. A., et al.
Published: (2000)
Towards adaptation of the NURBS weights in shape optimization
by: M. Ziani
Published: (2022)
by: M. Ziani
Published: (2022)
Simulation of the Mechanical Characteristics of a Granular Matter Tested under Biaxial Loading
by: Bi, Z.W., et al.
Published: (2015)
by: Bi, Z.W., et al.
Published: (2015)
Accelerated Life Test and FEM Simulation-Based Fatigue Analysis of an Aluminum Alloy Push Rod
by: Xua, L., et al.
Published: (2019)
by: Xua, L., et al.
Published: (2019)
The North Polar Spur as a Jet of Our Galaxy
by: Miroshnichenko, A. P.
Published: (2012)
by: Miroshnichenko, A. P.
Published: (2012)
Probabilistic Simulation of Shape Instability Based on the True Microstructure Model
by: Wu, G.C., et al.
Published: (2018)
by: Wu, G.C., et al.
Published: (2018)
Influence of a Strain Rate and Temperature on the Crack Tip Stress and Microstructure Evolution of Monocrystalline Nickel: a Molecular Dynamics Simulation
by: Wu, W.P., et al.
Published: (2014)
by: Wu, W.P., et al.
Published: (2014)
Numerical Simulation-Based Optimization of Contact Stress Distribution and Lubrication Conditions in the Straight Worm Drive
by: He, Y., et al.
Published: (2018)
by: He, Y., et al.
Published: (2018)
Spurs from the Sanctuary at Gurzuf Saddle Pass in the Crimean Mountains
by: M. V. Novychenkova
Published: (2013)
by: M. V. Novychenkova
Published: (2013)
Numerical Simulation of Flexible Riser under Torsion
by: Liu, M.S., et al.
Published: (2017)
by: Liu, M.S., et al.
Published: (2017)
Использование NURBS-аппроксимации для построения пространственной модели лица человека
by: Крак, Ю.В., et al.
Published: (2011)
by: Крак, Ю.В., et al.
Published: (2011)
Simulation of the Lightweight Ceramic/Aluminum Alloy Composite Armor for Optimizing Component Thickness Ratios
by: Chang, Z.-L., et al.
Published: (2019)
by: Chang, Z.-L., et al.
Published: (2019)
A Simulation Study on the Effect of Cavity Shapes on the Penetration of Linear Shaped Charges with Curved Liners
by: Dong, S.K., et al.
Published: (2018)
by: Dong, S.K., et al.
Published: (2018)
Simulation of the Spindle Coupled Multi-Axial Loading Fatigue Test of a Rear Axle
by: Dong, Z., et al.
Published: (2017)
by: Dong, Z., et al.
Published: (2017)
Numerical simulation of elastic linear micropolar media based on the pore space length scale assumption
by: Jeong, J., et al.
Published: (2008)
by: Jeong, J., et al.
Published: (2008)
FEM Simulation of the Cross-Wedge Rolling Process for a Stepped Shaft
by: Pater, Z., et al.
Published: (2017)
by: Pater, Z., et al.
Published: (2017)
Deep-Drawing Process Simulation for Tailor-Welded Blanks with an Elastic Blankholder
by: Brusilová, A., et al.
Published: (2017)
by: Brusilová, A., et al.
Published: (2017)
Nonlinearity of the Rock Joint Shear Strength
by: Wei, Y.F., et al.
Published: (2015)
by: Wei, Y.F., et al.
Published: (2015)
Numerical simulation of brittle damage in concrete specimens
by: Labadi, Y., et al.
Published: (2005)
by: Labadi, Y., et al.
Published: (2005)
Multiscale Modeling-Based Assessment of Elastic Properties of SLGS-Polymer Nanocomposites with Double-Atom Vacancy Defects
by: Wang, Z.Q., et al.
Published: (2018)
by: Wang, Z.Q., et al.
Published: (2018)
Numerical Simulation of the Inlet/Outlet Pressure Ratio Effect on the Heat Transfer Coefficient in an Air Turbine Cascade
by: He, Z., et al.
Published: (2019)
by: He, Z., et al.
Published: (2019)
Numerical Simulation of Rotary Compression Process of Hollow Balls
by: Skrochocki, D., et al.
Published: (2016)
by: Skrochocki, D., et al.
Published: (2016)
Numerical Simulation of Steel Target Penetration by Shaped Charge Distended Jet with a High-Polymer Liner
by: Yi, J.Y., et al.
Published: (2017)
by: Yi, J.Y., et al.
Published: (2017)
Fatigue Damage Analysis of an Asphalt Mixture Based on Pseudostiffness
by: Wang, X.R., et al.
Published: (2018)
by: Wang, X.R., et al.
Published: (2018)
Numerical Simulation of the Thermomechanical Behavior of a Hot Stamping Die
by: Jiang, Q.Y., et al.
Published: (2018)
by: Jiang, Q.Y., et al.
Published: (2018)
Experiments and Simulation on Mannesmann Piercing Process in the Drill Steel Manufacture
by: Zhao, Y.Q., et al.
Published: (2015)
by: Zhao, Y.Q., et al.
Published: (2015)
Computer Simulation of Normal and Oblique Impacts of Yawed Projectiles on Ceramic Targets
by: Gorel’skii, V.A.
Published: (2002)
by: Gorel’skii, V.A.
Published: (2002)
Experimental and Numerical Simulation of the Microcrack Coalescence Mechanism in Rock-Like Material
by: Haeri, H., et al.
Published: (2015)
by: Haeri, H., et al.
Published: (2015)
Solution of the First-Passage Problem by Advanced Monte Carlo Simulation Technique
by: Labou, M.
Published: (2003)
by: Labou, M.
Published: (2003)
Study of the Beltline Weld and Base Metal of WWER-440 First Generation Reactor Pressure Vessel
by: Schuhknecht, J., et al.
Published: (2010)
by: Schuhknecht, J., et al.
Published: (2010)
Numerical Simulation of the Damage Behavior of a Concrete Beam with an Anisotropic Damage Model
by: Long, Y.C., et al.
Published: (2018)
by: Long, Y.C., et al.
Published: (2018)
Centrifuge Simulation of the Thermal Response of a Dry Sand-Embedded Diaphragm Wall
by: You, S., et al.
Published: (2019)
by: You, S., et al.
Published: (2019)
Numerical Simulation and Experimental Study on the Interface Bonding of Stainless Steel Clad Plate
by: Jin, H.R., et al.
Published: (2018)
by: Jin, H.R., et al.
Published: (2018)
Modeling and Numerical Simulation of Fatigue Crack Growth in Cracked Specimens Containing Material Discontinuities
by: Jameel, Azher, et al.
Published: (2016)
by: Jameel, Azher, et al.
Published: (2016)
Small punch testing and Its numerical simulations under constant deflection force conditions
by: Dymacek, P., et al.
Published: (2008)
by: Dymacek, P., et al.
Published: (2008)
Modeling of Nonlinear Isolation System Based on Bouc-Wen Differential Model
by: Peng, Z., et al.
Published: (2017)
by: Peng, Z., et al.
Published: (2017)
Simulating the Crack Propagation Mechanism of Pre-Cracked Concrete Specimens under Shear Loading Conditions
by: Haeri, H.
Published: (2015)
by: Haeri, H.
Published: (2015)
Similar Items
-
Finishing spur gears worm diamond elasticity hons
by: A. V. Krivosheja, et al.
Published: (2016) -
Vibration Analysis of a Low-Power Reduction Gear
by: Noga, S., et al.
Published: (2016) -
An equivalent uniaxial fatigue stress model for analyzing landing gear fuse pins
by: Narayan, K., et al.
Published: (2006) -
Isogeometric spline reconstruction of plane curves
by: Nazarenko, N. A., et al.
Published: (2000) -
Towards adaptation of the NURBS weights in shape optimization
by: M. Ziani
Published: (2022)