Finite Element Analysis of the Temperature Field of an Emergency Brake and Study of its Thermal Properties
For simulation of typical operating conditions of an emergency brake, analyze the theoretical heat energy of single emergency braking. The formula of the maximum temperature of a contact point was derived from the theory of friction heat conduction during braking. The finite element model of the dis...
Gespeichert in:
| Veröffentlicht in: | Проблемы прочности |
|---|---|
| Datum: | 2015 |
| Hauptverfasser: | Wen, H., Yang, F., Lv, W.Q., Chen, Y.X., Wang, Q.W. |
| Format: | Artikel |
| Sprache: | Englisch |
| Veröffentlicht: |
Інститут проблем міцності ім. Г.С. Писаренко НАН України
2015
|
| Schlagworte: | |
| Online Zugang: | https://nasplib.isofts.kiev.ua/handle/123456789/173276 |
| Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
| Назва журналу: | Digital Library of Periodicals of National Academy of Sciences of Ukraine |
| Zitieren: | Finite Element Analysis of the Temperature Field of an Emergency Brake and Study of its Thermal Properties / H. Wen, F. Yang, W.Q. Lv, Y.X. Chen, Q.W. Wang // Проблемы прочности. — 2015. — № 1. — С. 157-163. — Бібліогр.: 16 назв. — англ. |
Institution
Digital Library of Periodicals of National Academy of Sciences of UkraineÄhnliche Einträge
Surface Strengthening Behavior of Magnesium Alloy with Laser Thermal Loading under Rapid Cooling
von: Ge, Y.Q., et al.
Veröffentlicht: (2018)
von: Ge, Y.Q., et al.
Veröffentlicht: (2018)
Study on Thermal Stress of Honeycomb Ceramic Regenerators with Different Parameters
von: Wang, Y.X., et al.
Veröffentlicht: (2014)
von: Wang, Y.X., et al.
Veröffentlicht: (2014)
Thermal Fatigue Life Prediction of Ventilation Air Methane Oxidation Bed
von: Liu, Y.Q., et al.
Veröffentlicht: (2016)
von: Liu, Y.Q., et al.
Veröffentlicht: (2016)
Modelling of the temperature mode of brake system with account of thermal sensitivity of materials
von: O. Yevtushenko, et al.
Veröffentlicht: (2014)
von: O. Yevtushenko, et al.
Veröffentlicht: (2014)
Influence of friction power on temperature during braking
von: K. Topchevska
Veröffentlicht: (2017)
von: K. Topchevska
Veröffentlicht: (2017)
Structural Strength and Service Life of the Extrusion Forming Die for Agricultural Engine Piston Heads
von: Yang, L.Q., et al.
Veröffentlicht: (2018)
von: Yang, L.Q., et al.
Veröffentlicht: (2018)
Compressive Properties of SiC Particle-Reinforced Aluminum Matrix Composites under Repeated Impact Loading
von: Cao, D.F., et al.
Veröffentlicht: (2015)
von: Cao, D.F., et al.
Veröffentlicht: (2015)
Evaluation of Metal-Active Gas Double-Sided Double-Power Arc Welded Joints of High-Strength Low-Alloy Steel
von: Chen, Y.X., et al.
Veröffentlicht: (2015)
von: Chen, Y.X., et al.
Veröffentlicht: (2015)
The influence of temperature on the tribological properties of composites for brake pads
von: F. F. Yusubov, et al.
Veröffentlicht: (2021)
von: F. F. Yusubov, et al.
Veröffentlicht: (2021)
Thermal-stress state of a disk during multiple braking
von: A. Adamovych
Veröffentlicht: (2015)
von: A. Adamovych
Veröffentlicht: (2015)
A comprehensive genome-wide analysis of lncrna expression profile during hepatic carcinoma cell proliferation promoted by phospholipase Cγ2
von: X. Chen, et al.
Veröffentlicht: (2023)
von: X. Chen, et al.
Veröffentlicht: (2023)
Influence of the friction power on the temperature stresses during single braking
von: K. Topchevska
Veröffentlicht: (2017)
von: K. Topchevska
Veröffentlicht: (2017)
Comparative analysis of the complete mitochondrial genome sequence of an alpine plant Triosteum pinnatifidum
von: H. Liu, et al.
Veröffentlicht: (2023)
von: H. Liu, et al.
Veröffentlicht: (2023)
Size Dependence of Residual Thermal Stresses in Micro Multilayer Ceramic Capacitors by Using Finite Element Unit Cell Model Including Strain Gradient Effect
von: Jiang, W.G., et al.
Veröffentlicht: (2013)
von: Jiang, W.G., et al.
Veröffentlicht: (2013)
A Probabilistic Model for Describing Short Fatigue Crack Growth Behavior of LZ50 Steel
von: Yang, B., et al.
Veröffentlicht: (2016)
von: Yang, B., et al.
Veröffentlicht: (2016)
Short Fatigue Crack Growth at Different Maintenance Times for LZ50 Steel
von: Yang, B., et al.
Veröffentlicht: (2015)
von: Yang, B., et al.
Veröffentlicht: (2015)
Study on Thermal Stress of Honeycomb Ceramic Regenerators with Different Parameters
von: Y. X. Wang, et al.
Veröffentlicht: (2014)
von: Y. X. Wang, et al.
Veröffentlicht: (2014)
Determination of maximum temperature of the pad–disc tribosystem during single braking
von: O. Yevtushenko, et al.
Veröffentlicht: (2020)
von: O. Yevtushenko, et al.
Veröffentlicht: (2020)
Analysis and Experimental Study of Vibration System Characteristics of Ultrasonic Compound Electrical Machining
von: Deng, Z.Q., et al.
Veröffentlicht: (2017)
von: Deng, Z.Q., et al.
Veröffentlicht: (2017)
Identification and differential expression of microRNA in response to elevated phospholipase Cγ expression in liver RH 35 carcinoma cells
von: X. Chen, et al.
Veröffentlicht: (2020)
von: X. Chen, et al.
Veröffentlicht: (2020)
Thermoelastic stress state in the brake drum with prefracture zone at braking the wheel machine
von: Зульфугаров, Э. И.
Veröffentlicht: (2014)
von: Зульфугаров, Э. И.
Veröffentlicht: (2014)
Thermoelastic stress state in the brake drum with prefracture zone at braking the wheel machine
von: E. I. ulfugarov
Veröffentlicht: (2014)
von: E. I. ulfugarov
Veröffentlicht: (2014)
Thermoelastic stress state in the brake drum with prefracture zone at braking the wheel machine
von: Зульфугаров, Э. И.
Veröffentlicht: (2014)
von: Зульфугаров, Э. И.
Veröffentlicht: (2014)
Virological Monitoring of Wastewater as an Element of Surveillance for Emergent and Re-Emergent Infections
von: Zadorozhna, V.I., et al.
Veröffentlicht: (2024)
von: Zadorozhna, V.I., et al.
Veröffentlicht: (2024)
Experimental Study and Finite Element Analysis of Critical Stresses of Reinforced Thermoplastic Pipes under Various Loads
von: Li, G.H., et al.
Veröffentlicht: (2016)
von: Li, G.H., et al.
Veröffentlicht: (2016)
Starting and braking of vertical conveyer
von: V. F. Monastyrskij, et al.
Veröffentlicht: (2016)
von: V. F. Monastyrskij, et al.
Veröffentlicht: (2016)
Doping Fe-based diamond tool matrix composites with a rare-earth element
von: Zou, Q., et al.
Veröffentlicht: (2009)
von: Zou, Q., et al.
Veröffentlicht: (2009)
Optimization of Residual Stresses in Laser-Mixed WC(Co,Ni) Coatings
von: Liu, C.W., et al.
Veröffentlicht: (2019)
von: Liu, C.W., et al.
Veröffentlicht: (2019)
Finite groups with X-quasipermutable Sylow subgroups
von: X. Yi, et al.
Veröffentlicht: (2015)
von: X. Yi, et al.
Veröffentlicht: (2015)
Study on the Fabrication of Nano-SiC/Ni-P Composite Coatings with the Assistance of Electromagnetic-Ultrasonic Compound Field
von: Zhou, H.Z., et al.
Veröffentlicht: (2017)
von: Zhou, H.Z., et al.
Veröffentlicht: (2017)
Finite-time robust position tracking control for DC motors under uncertain dynamics
von: Nguyen, Q. B., et al.
Veröffentlicht: (2026)
von: Nguyen, Q. B., et al.
Veröffentlicht: (2026)
Influence of the time of contact pressure increase on temperature in the pad-disc tribosystem during braking
von: K. Topchevska
Veröffentlicht: (2018)
von: K. Topchevska
Veröffentlicht: (2018)
Strength Prediction Model of a Particle-Reinforced Shellproof Ceramic Composite
von: X. H. Ni, et al.
Veröffentlicht: (2014)
von: X. H. Ni, et al.
Veröffentlicht: (2014)
Expression of cathepsin l in nasopharyngeal carcinoma and its clinical significance
von: Xu, X., et al.
Veröffentlicht: (2009)
von: Xu, X., et al.
Veröffentlicht: (2009)
Update to the calculation disc clutches and brakes
von: Yu. M. Ovcharenko, et al.
Veröffentlicht: (2013)
von: Yu. M. Ovcharenko, et al.
Veröffentlicht: (2013)
Modeling of frictional heating during braking
von: O. Yevtushenko, et al.
Veröffentlicht: (2012)
von: O. Yevtushenko, et al.
Veröffentlicht: (2012)
Numerical bifurcation of a delayed diffusive hematopoiesis model with Dirichlet boundary condition
von: X. Y. Liu, et al.
Veröffentlicht: (2024)
von: X. Y. Liu, et al.
Veröffentlicht: (2024)
Strength Prediction Model of a Particle-Reinforced Shellproof Ceramic Composite
von: Ni, X.H., et al.
Veröffentlicht: (2014)
von: Ni, X.H., et al.
Veröffentlicht: (2014)
Central election commission as a brake of decentralization
von: T. Bevz
Veröffentlicht: (2019)
von: T. Bevz
Veröffentlicht: (2019)
Sedimentation Influence on Magnetorheological Brake Torque Moment
von: Vėžys, J., et al.
Veröffentlicht: (2018)
von: Vėžys, J., et al.
Veröffentlicht: (2018)
Ähnliche Einträge
-
Surface Strengthening Behavior of Magnesium Alloy with Laser Thermal Loading under Rapid Cooling
von: Ge, Y.Q., et al.
Veröffentlicht: (2018) -
Study on Thermal Stress of Honeycomb Ceramic Regenerators with Different Parameters
von: Wang, Y.X., et al.
Veröffentlicht: (2014) -
Thermal Fatigue Life Prediction of Ventilation Air Methane Oxidation Bed
von: Liu, Y.Q., et al.
Veröffentlicht: (2016) -
Modelling of the temperature mode of brake system with account of thermal sensitivity of materials
von: O. Yevtushenko, et al.
Veröffentlicht: (2014) -
Influence of friction power on temperature during braking
von: K. Topchevska
Veröffentlicht: (2017)