Buchumschlag

Nonlinearity of the Rock Joint Shear Strength

The triaxial testing for irregular or unfilled rock joints was conducted on the rock mechanics test system (MTS). A series of axial failure stresses under different confining pressures applied to the same specimen was continuously acquired on MTS. The corresponding normal and shear stresses acting o...

Ausführliche Beschreibung

Gespeichert in:

Bibliographische Detailangaben
Veröffentlicht in:	Проблемы прочности
Datum:	2015
Hauptverfasser:	Wei, Y.F., Fu, W.X., Nie, D.X.
Format:	Artikel
Sprache:	Englisch
Veröffentlicht:	Інститут проблем міцності ім. Г.С. Писаренко НАН України 2015
Schlagworte:	Научно-технический раздел
Online Zugang:	https://nasplib.isofts.kiev.ua/handle/123456789/173286
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:	Digital Library of Periodicals of National Academy of Sciences of Ukraine
Zitieren:	Nonlinearity of the Rock Joint Shear Strength / Y.F. Wei, W.X. Fu, D.X. Nie // Проблемы прочности. — 2015. — № 1. — С. 231-239. — Бібліогр.: 22 назв. — англ.

Institution

Digital Library of Periodicals of National Academy of Sciences of Ukraine

Ähnliche Einträge

Multi-Segment Linear Function Approximation to Nonlinear Shear Strength Envelope
von: Lei, X.Z., et al.
Veröffentlicht: (2016)

The Ultimate Tensile Strength of Coach Peel Self-Piercing Riveting Joints
von: He, X., et al.
Veröffentlicht: (2013)

Evaluation of Metal-Active Gas Double-Sided Double-Power Arc Welded Joints of High-Strength Low-Alloy Steel
von: Chen, Y.X., et al.
Veröffentlicht: (2015)

Mechanical Behavior and Failure of Riveting Joints in Tensile and Shear Tests
von: Mucha, J., et al.
Veröffentlicht: (2015)

Nonlinear Finite Element Analysis of the Ultimate Strength of Tube-Angle Combo Tower K-Joints
von: Jua, Y.Z., et al.
Veröffentlicht: (2015)

Surface Strengthening Behavior of Magnesium Alloy with Laser Thermal Loading under Rapid Cooling
von: Ge, Y.Q., et al.
Veröffentlicht: (2018)

Ab initio DFT study of ideal shear strength of polytypes of silicon carbide
von: Umeno, Y., et al.
Veröffentlicht: (2008)

Shear Strength Optimization of Laser-Joined Polyphenylene Sulfide-Based CFRTP and Stainless Steel
von: Sheng, L.Y., et al.
Veröffentlicht: (2018)

Strength of Reactive Powder Concrete Beam-Column Joints Reinforced with High-Strength (HRB600) Bars under Seismic Loading
von: Wang, D.H., et al.
Veröffentlicht: (2017)

Shear Behavior of Non-Persistent Joint under High Normal Load
von: Sarfarazi, V., et al.
Veröffentlicht: (2017)

Experimental Investigation on the Tensile Strength of Composite Laminates Containing Open and Filled Holes
von: Fan, X.L., et al.
Veröffentlicht: (2014)

Mechanical Properties of Friction Stir-Welded Joints of Aluminum Alloys
von: Chen, W.J., et al.
Veröffentlicht: (2015)

Study on High-Strength Ring Chain Dynamic Characteristics under Different Launch Parameters
von: Zhang, Q., et al.
Veröffentlicht: (2018)

Strength Prediction Model of a Particle-Reinforced Shellproof Ceramic Composite
von: Ni, X.H., et al.
Veröffentlicht: (2014)

On the Strength and Crack Propagation Process of the Pre-Cracked Rock-Like Specimens under Uniaxial Compression
von: Haeri, H., et al.
Veröffentlicht: (2014)

Fatigue Strength and Life Prediction of a MAR-M247 Nickel-Base Superalloy Gas Turbine Blade with Multiple Carbide Inclusions
von: Lin, H., et al.
Veröffentlicht: (2019)

Optimization Analysis of Initial Sheet Metal Contour Line for High-Strength Boron Steel in Hot Stamping
von: Zhang, Z.Q., et al.
Veröffentlicht: (2016)

Effect of a Nonuniform Radial/Axial Tip Clearance on the Flow Field in a Mixed-Flow Pump
von: Li, W., et al.
Veröffentlicht: (2018)

Three-Dimensional Finite Element Analysis of Tensile-Shear Spot-Welded Joints in Tensile and Compressive Loading Conditions
von: Adib, H., et al.
Veröffentlicht: (2004)

Application of the Point Stress Criterion to Assess the Bond Strength of a Single-Lap Joint
von: Sajikumar, K.S., et al.
Veröffentlicht: (2014)

Fracture Assessment of the Weld–Base Metal Interface of High-Strength Steel Weld Joint
von: Zhong, Z.P., et al.
Veröffentlicht: (2018)

Quantification of the Influence of Residual Stresses on Fatigue Strength of Al-Alloy Welded Joints by Means of the Local Strain Energy Density Approach
von: Ferro, P., et al.
Veröffentlicht: (2016)

Numerical Study of Failure Modes and Crack Propagation in 2A12 Aluminum Target against Blunt-Nosed Projectile at Low Yaw Angle
von: Deng, Y.F., et al.
Veröffentlicht: (2016)

Study on the Cracking Mechanism of YQ450NQR1 High-Strength Weathering Steel
von: Qing, J.S., et al.
Veröffentlicht: (2018)

Pulse Current Treatment Effect on the Strength of Reinforcing Steel and Its Weld Joint under Impact Loading
von: Kruszka, L., et al.
Veröffentlicht: (2009)

Microstructure and Mechanical Properties of an Underwater Wet Welded Dissimilar Ferritic/Austenitic Steel Joint
von: Guo, N., et al.
Veröffentlicht: (2015)

Design Optimization for Shear Key on the TF Coil Structure of the KSTAR Tokamak
von: Lee, D.S., et al.
Veröffentlicht: (2016)

Constitutive Equations and Processing Maps for 49MnVS3 Non-Quenched and Tempered Steel
von: Chen, Y.F., et al.
Veröffentlicht: (2014)

A Simulation Study on the Effect of Cavity Shapes on the Penetration of Linear Shaped Charges with Curved Liners
von: Dong, S.K., et al.
Veröffentlicht: (2018)

Effect of Pin Diameters on the Wear Characteristics of Friction Pairs
von: Wei, Y.H., et al.
Veröffentlicht: (2019)

Bond Strength Deterioration of Reinforced and Prestressed Concrete Members at Reversed Cyclic Loads
von: Lee, J.-Y., et al.
Veröffentlicht: (2015)

Effects of Lattice Relaxation and Limiting Shear Stress of fcc Metals at High-Rate Deformation
von: Kamyshenko, V.V., et al.
Veröffentlicht: (2002)

Analysis of the Contact Stresses in Curvic Couplings of Gas Turbine in a Blade-Off Event
von: Jiang, X.-J., et al.
Veröffentlicht: (2012)

The Structural Strength of Glass: Hidden Damage
von: Veera, F.A., et al.
Veröffentlicht: (2011)

Experimental-Numerical Study of Tensile Strength of the High-Strength Steel S690QL at Elevated Temperatures
von: Arsić, D., et al.
Veröffentlicht: (2016)

Bending Performance of Steel/CFRP Plate-Reinforced Core Timber Beams
von: Xiong, X.Y., et al.
Veröffentlicht: (2017)

Strength Degradation of Glass Fiber Reinforced Polymer Bars Subjected to Reversed Cyclic Load
von: Lee, J.Y., et al.
Veröffentlicht: (2014)

Research on Rapidly Shaped Charge Cutting Technology of Aircraft Damaged Thin-Wall Structure
von: Cui, A.Y., et al.
Veröffentlicht: (2016)

Simulation of the Mechanical Characteristics of a Granular Matter Tested under Biaxial Loading
von: Bi, Z.W., et al.
Veröffentlicht: (2015)

Study on the Fabrication of Nano-SiC/Ni-P Composite Coatings with the Assistance of Electromagnetic-Ultrasonic Compound Field
von: Zhou, H.Z., et al.
Veröffentlicht: (2017)