Mechanical Behavior of the Weld Joints of Thick Steel Plates Produced by Various Welding Processes

The effect of a welding process (electrogas welding (EGW) and flux cored arc welding (FCAW)) on the fracture toughness, CTOD (crack tip opening displacement), and mechanical properties (tensile, bending, impact strengths and hardness) of thick weld joints is examined. The CTOD value of the FCAW weld...

Ausführliche Beschreibung

Gespeichert in:
Bibliographische Detailangaben
Veröffentlicht in:Проблемы прочности
Datum:2015
Hauptverfasser: Bang, HanSur, Bang, HeeSeon, Ro, ChanSeung, Jeong, SuOk
Format: Artikel
Sprache:Englisch
Veröffentlicht: Інститут проблем міцності ім. Г.С. Писаренко НАН України 2015
Schlagworte:
Online Zugang:https://nasplib.isofts.kiev.ua/handle/123456789/173287
Tags: Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:Digital Library of Periodicals of National Academy of Sciences of Ukraine
Zitieren:Mechanical Behavior of the Weld Joints of Thick Steel Plates Produced by Various Welding Processes / HanSur Bang, HeeSeon Bang, ChanSeung Ro, SuOk Jeong // Проблемы прочности. — 2015. — № 1. — С. 240-249. — Бібліогр.: 14 назв. — англ.

Institution

Digital Library of Periodicals of National Academy of Sciences of Ukraine
_version_ 1862580910888583168
author Bang, HanSur
Bang, HeeSeon
Ro, ChanSeung
Jeong, SuOk
author_facet Bang, HanSur
Bang, HeeSeon
Ro, ChanSeung
Jeong, SuOk
citation_txt Mechanical Behavior of the Weld Joints of Thick Steel Plates Produced by Various Welding Processes / HanSur Bang, HeeSeon Bang, ChanSeung Ro, SuOk Jeong // Проблемы прочности. — 2015. — № 1. — С. 240-249. — Бібліогр.: 14 назв. — англ.
collection DSpace DC
container_title Проблемы прочности
description The effect of a welding process (electrogas welding (EGW) and flux cored arc welding (FCAW)) on the fracture toughness, CTOD (crack tip opening displacement), and mechanical properties (tensile, bending, impact strengths and hardness) of thick weld joints is examined. The CTOD value of the FCAW weld joints was higher than that of the EGW ones. The fractured welded specimen after the CTOD test reveals ductile and cleavage fractures of the weld joint faces after flux cored arc and electrogas weldings, respectively. The mechanical properties of the EGW welded specimens satisfied relevant classification rules. These results suggest that the EGW process is an effective substitute for the current welding process (FCAW) used for high-strength thick steel plates. Рассмотрено влияние способа сварки (электрогазовая и дуговая порошковой проволокой) на вязкость разрушения, раскрытие вершины трещины и механические свойства (предел прочности при растяжении, изгибе, ударная вязкость и твердость) сварных швов. Значение раскрытия вершины трещины для швов, полученных дуговой сваркой, было выше такового для швов, полученных электрогазовой сваркой. Разрушенный сварной образец после испытания по определению раскрытия вершины трещины обнаруживает вязкое разрушение и хрупкий излом лицевых поверхностей швов после дуговой и электрогазовой сварки соответственно. Механические свойства сварных образцов после электрогазовой сварки удовлетворяют соответствующим критериям классификации. Эти результаты свидетельствуют о том, что электрогазовая сварка может эффективно заменять используемую в настоящее время дуговую сварку для высокопрочной толстолистовой стали.
first_indexed 2025-11-26T21:40:58Z
format Article
fulltext
id nasplib_isofts_kiev_ua-123456789-173287
institution Digital Library of Periodicals of National Academy of Sciences of Ukraine
issn 0556-171X
language English
last_indexed 2025-11-26T21:40:58Z
publishDate 2015
publisher Інститут проблем міцності ім. Г.С. Писаренко НАН України
record_format dspace
spelling Bang, HanSur
Bang, HeeSeon
Ro, ChanSeung
Jeong, SuOk
2020-11-28T16:12:52Z
2020-11-28T16:12:52Z
2015
Mechanical Behavior of the Weld Joints of Thick Steel Plates Produced by Various Welding Processes / HanSur Bang, HeeSeon Bang, ChanSeung Ro, SuOk Jeong // Проблемы прочности. — 2015. — № 1. — С. 240-249. — Бібліогр.: 14 назв. — англ.
0556-171X
https://nasplib.isofts.kiev.ua/handle/123456789/173287
539.4
The effect of a welding process (electrogas welding (EGW) and flux cored arc welding (FCAW)) on the fracture toughness, CTOD (crack tip opening displacement), and mechanical properties (tensile, bending, impact strengths and hardness) of thick weld joints is examined. The CTOD value of the FCAW weld joints was higher than that of the EGW ones. The fractured welded specimen after the CTOD test reveals ductile and cleavage fractures of the weld joint faces after flux cored arc and electrogas weldings, respectively. The mechanical properties of the EGW welded specimens satisfied relevant classification rules. These results suggest that the EGW process is an effective substitute for the current welding process (FCAW) used for high-strength thick steel plates.
Рассмотрено влияние способа сварки (электрогазовая и дуговая порошковой проволокой) на вязкость разрушения, раскрытие вершины трещины и механические свойства (предел прочности при растяжении, изгибе, ударная вязкость и твердость) сварных швов. Значение раскрытия вершины трещины для швов, полученных дуговой сваркой, было выше такового для швов, полученных электрогазовой сваркой. Разрушенный сварной образец после испытания по определению раскрытия вершины трещины обнаруживает вязкое разрушение и хрупкий излом лицевых поверхностей швов после дуговой и электрогазовой сварки соответственно. Механические свойства сварных образцов после электрогазовой сварки удовлетворяют соответствующим критериям классификации. Эти результаты свидетельствуют о том, что электрогазовая сварка может эффективно заменять используемую в настоящее время дуговую сварку для высокопрочной толстолистовой стали.
This research was financally supported by the Ministry of Education, Science Technology (MEST) and National Research Foundation of Korea (NRF) through the human resource training project for regional innovation (2012H1B8A2026193).
en
Інститут проблем міцності ім. Г.С. Писаренко НАН України
Проблемы прочности
Научно-технический раздел
Mechanical Behavior of the Weld Joints of Thick Steel Plates Produced by Various Welding Processes
Механическое поведение сварных соединений толстолистовой стали, получаемых различными способами сварки
Article
published earlier
spellingShingle Mechanical Behavior of the Weld Joints of Thick Steel Plates Produced by Various Welding Processes
Bang, HanSur
Bang, HeeSeon
Ro, ChanSeung
Jeong, SuOk
Научно-технический раздел
title Mechanical Behavior of the Weld Joints of Thick Steel Plates Produced by Various Welding Processes
title_alt Механическое поведение сварных соединений толстолистовой стали, получаемых различными способами сварки
title_full Mechanical Behavior of the Weld Joints of Thick Steel Plates Produced by Various Welding Processes
title_fullStr Mechanical Behavior of the Weld Joints of Thick Steel Plates Produced by Various Welding Processes
title_full_unstemmed Mechanical Behavior of the Weld Joints of Thick Steel Plates Produced by Various Welding Processes
title_short Mechanical Behavior of the Weld Joints of Thick Steel Plates Produced by Various Welding Processes
title_sort mechanical behavior of the weld joints of thick steel plates produced by various welding processes
topic Научно-технический раздел
topic_facet Научно-технический раздел
url https://nasplib.isofts.kiev.ua/handle/123456789/173287
work_keys_str_mv AT banghansur mechanicalbehavioroftheweldjointsofthicksteelplatesproducedbyvariousweldingprocesses
AT bangheeseon mechanicalbehavioroftheweldjointsofthicksteelplatesproducedbyvariousweldingprocesses
AT rochanseung mechanicalbehavioroftheweldjointsofthicksteelplatesproducedbyvariousweldingprocesses
AT jeongsuok mechanicalbehavioroftheweldjointsofthicksteelplatesproducedbyvariousweldingprocesses
AT banghansur mehaničeskoepovedeniesvarnyhsoedineniitolstolistovoistalipolučaemyhrazličnymisposobamisvarki
AT bangheeseon mehaničeskoepovedeniesvarnyhsoedineniitolstolistovoistalipolučaemyhrazličnymisposobamisvarki
AT rochanseung mehaničeskoepovedeniesvarnyhsoedineniitolstolistovoistalipolučaemyhrazličnymisposobamisvarki
AT jeongsuok mehaničeskoepovedeniesvarnyhsoedineniitolstolistovoistalipolučaemyhrazličnymisposobamisvarki