A Method of Virtual Design of the Fatigue Life of a Dynamic Structure
В современных инженерных расчетах важное место занимают расчеты усталостной долговечности и оценка надежности динамических систем при их случайном нагружении. При проведении этих расчетов необходимо знать плотность спектра напряжений для исследуемого компонента динамической системы. Современный уров...
Saved in:
| Published in: | Проблемы прочности |
|---|---|
| Date: | 2015 |
| Main Authors: | Zhao, W., Zhou, X., Shena, M. |
| Format: | Article |
| Language: | English |
| Published: |
Інститут проблем міцності ім. Г.С. Писаренко НАН України
2015
|
| Subjects: | |
| Online Access: | https://nasplib.isofts.kiev.ua/handle/123456789/173337 |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Journal Title: | Digital Library of Periodicals of National Academy of Sciences of Ukraine |
| Cite this: | A Method of Virtual Design of the Fatigue Life of a Dynamic Structure / W. Zhao, X. Zhou, M. Shena // Проблемы прочности. — 2015. — № 3. — С. 162-169. — Бібліогр.: 12 назв. — англ. |
Institution
Digital Library of Periodicals of National Academy of Sciences of UkraineSimilar Items
Improved Method of Fatigue Life Assessment for TiAl Alloys
by: Feng, R.C., et al.
Published: (2014)
by: Feng, R.C., et al.
Published: (2014)
Fatigue Life Prediction of Welded Box Structures
by: Zedira, H., et al.
Published: (2004)
by: Zedira, H., et al.
Published: (2004)
Effect of Cyclic Stresses below the Endurance Limit on the Fatigue Life of 40Cr Steel
by: Zhao, L.H., et al.
Published: (2018)
by: Zhao, L.H., et al.
Published: (2018)
A Probabilistic Model for Describing Short Fatigue Crack Growth Behavior of LZ50 Steel
by: Yang, B., et al.
Published: (2016)
by: Yang, B., et al.
Published: (2016)
Thermal Fatigue Life Prediction of Ventilation Air Methane Oxidation Bed
by: Liu, Y.Q., et al.
Published: (2016)
by: Liu, Y.Q., et al.
Published: (2016)
Evaluation of the limit state and cyclic life of structural materials under thermal fatigue
by: Gopkalo, A.P.
Published: (2009)
by: Gopkalo, A.P.
Published: (2009)
Beyond RPV Design Life
by: Ballesteros, A., et al.
Published: (2004)
by: Ballesteros, A., et al.
Published: (2004)
Simulation of the Spindle Coupled Multi-Axial Loading Fatigue Test of a Rear Axle
by: Dong, Z., et al.
Published: (2017)
by: Dong, Z., et al.
Published: (2017)
Dynamic Stress Analysis of a Composite Electromagnetic Track
by: Tian, Z.G., et al.
Published: (2018)
by: Tian, Z.G., et al.
Published: (2018)
Short Fatigue Crack Growth at Different Maintenance Times for LZ50 Steel
by: Yang, B., et al.
Published: (2015)
by: Yang, B., et al.
Published: (2015)
Fatigue Damage Analysis of an Asphalt Mixture Based on Pseudostiffness
by: Wang, X.R., et al.
Published: (2018)
by: Wang, X.R., et al.
Published: (2018)
Fatigue life of welded joints according to energy criteria in the critical plane
by: Lagoda, T.
Published: (2006)
by: Lagoda, T.
Published: (2006)
Study on Fatigue Life of Plow Bit under Different Planning Parameters
by: Zhang, Q., et al.
Published: (2014)
by: Zhang, Q., et al.
Published: (2014)
Wear-fatigue test methods and their significance
by: Bahdanovich, A.V., et al.
Published: (2009)
by: Bahdanovich, A.V., et al.
Published: (2009)
Notch Effect on the Fatigue Behavior of a Hot Dip Galvanized Structural Steel
by: Berto, F., et al.
Published: (2015)
by: Berto, F., et al.
Published: (2015)
Creep Lifetime Assessment of Pressure-Tight PE100 Pipes Based on a Slow Fatigue Crack Growth
by: Luo, W.B., et al.
Published: (2018)
by: Luo, W.B., et al.
Published: (2018)
Isothermal Fatigue and Creep-Fatigue Interaction Behavior of Nickel-Base Directionally Solidified Superalloy
by: Haq, A.U., et al.
Published: (2018)
by: Haq, A.U., et al.
Published: (2018)
Effect of Preliminary Torsional Strain on Low-Cycle Fatigue of Q345B Structural Steel
by: Hu, X.L., et al.
Published: (2019)
by: Hu, X.L., et al.
Published: (2019)
An Improved Projection Method for Determination of Fatigue Parameters of Metal Structures Based on Spherical Direction Cosine Group Construction
by: Yang, B., et al.
Published: (2016)
by: Yang, B., et al.
Published: (2016)
A model of fatigue crack propagation in metals
by: Yakovleva, T.Yu., et al.
Published: (2009)
by: Yakovleva, T.Yu., et al.
Published: (2009)
Area and point approaches in fatigue life evaluation under combined bending and torsion loading
by: Karolczuk, A., et al.
Published: (2008)
by: Karolczuk, A., et al.
Published: (2008)
High-Cycle Fatigue Properties and Damage Mechanism of Q345B Structural Steel
by: Hu, X.L., et al.
Published: (2017)
by: Hu, X.L., et al.
Published: (2017)
Accelerated Life Test and FEM Simulation-Based Fatigue Analysis of an Aluminum Alloy Push Rod
by: Xua, L., et al.
Published: (2019)
by: Xua, L., et al.
Published: (2019)
Thermal Fatigue Resistance of Bionic Compacted Graphite Cast Iron Treated with the Twice Laser Process in Water
by: Liu, Y., et al.
Published: (2015)
by: Liu, Y., et al.
Published: (2015)
Method of the shortcut estimation of rails reliability by the fatigue strength criterion
by: Sosnovskii, L.A., et al.
Published: (2009)
by: Sosnovskii, L.A., et al.
Published: (2009)
Service loading test as a source for the fatigue curve parameters’ estimation
by: Gadolina, I.V., et al.
Published: (2009)
by: Gadolina, I.V., et al.
Published: (2009)
Effect of a Nonuniform Radial/Axial Tip Clearance on the Flow Field in a Mixed-Flow Pump
by: Li, W., et al.
Published: (2018)
by: Li, W., et al.
Published: (2018)
Fatigue lifetime of ADI from ultimate tensile strength to permanent fatigue limit
by: Zapletal, J., et al.
Published: (2008)
by: Zapletal, J., et al.
Published: (2008)
On Designing Time-Censored Step-Stress Life Test for the Burr Type-XII Distribution
by: Ismail, Ali A., et al.
Published: (2017)
by: Ismail, Ali A., et al.
Published: (2017)
Size effect in contact fatigue
by: Sosnovskii, L.A., et al.
Published: (2009)
by: Sosnovskii, L.A., et al.
Published: (2009)
Modeling of Damage Interaction in Fatigue Relaxation for Long-Term Life Prediction. Case of Alloy 800 Grade 2 Study at 550°C
by: Gharad, A. El, et al.
Published: (2002)
by: Gharad, A. El, et al.
Published: (2002)
Optimal Design of Failure-Censored Constant-Stress Life Test Plans for the Inverse Weibull Distribution
by: Ismaila, Ali A., et al.
Published: (2019)
by: Ismaila, Ali A., et al.
Published: (2019)
Fracture and Fatigue Analysis for a Cracked Carabiner Using 3D Finite Element Simulations
by: Aliha, M.R.M., et al.
Published: (2015)
by: Aliha, M.R.M., et al.
Published: (2015)
An Experimental Study of the Dynamic Split Tension Properties of Reinforced Concrete
by: Zhao, Z., et al.
Published: (2016)
by: Zhao, Z., et al.
Published: (2016)
Grain boundary influence during short fatigue crack growth using a discrete dislocation technique
by: Hansson, P., et al.
Published: (2008)
by: Hansson, P., et al.
Published: (2008)
In-service fatigue fracture mechanisms in covered disks of a TV3-117VK helicopter turbine engine
by: Shanyavskii, A.A., et al.
Published: (2008)
by: Shanyavskii, A.A., et al.
Published: (2008)
Influence of a Strain Rate and Temperature on the Crack Tip Stress and Microstructure Evolution of Monocrystalline Nickel: a Molecular Dynamics Simulation
by: Wu, W.P., et al.
Published: (2014)
by: Wu, W.P., et al.
Published: (2014)
Structural Strength and Service Life of the Extrusion Forming Die for Agricultural Engine Piston Heads
by: Yang, L.Q., et al.
Published: (2018)
by: Yang, L.Q., et al.
Published: (2018)
Theoretical-experimental model for predicting crack growth rate in structural alloys under combined action of fatigue and creep
by: Pokrovskii, V.V., et al.
Published: (2009)
by: Pokrovskii, V.V., et al.
Published: (2009)
Fatigue of NPP Components and Piping under Service Conditions
by: Filatov, V.M.
Published: (2004)
by: Filatov, V.M.
Published: (2004)
Similar Items
-
Improved Method of Fatigue Life Assessment for TiAl Alloys
by: Feng, R.C., et al.
Published: (2014) -
Fatigue Life Prediction of Welded Box Structures
by: Zedira, H., et al.
Published: (2004) -
Effect of Cyclic Stresses below the Endurance Limit on the Fatigue Life of 40Cr Steel
by: Zhao, L.H., et al.
Published: (2018) -
A Probabilistic Model for Describing Short Fatigue Crack Growth Behavior of LZ50 Steel
by: Yang, B., et al.
Published: (2016) -
Thermal Fatigue Life Prediction of Ventilation Air Methane Oxidation Bed
by: Liu, Y.Q., et al.
Published: (2016)