Non-Monotonous Mechanical Behavior at the Nanoscale: Elastic and Plastic Properties
Немонотонный характер прочности, объема активации и параметра чувствительности материала к давлению в случае достижения наномасштабных размеров зерна интерпретируется на основании “правила смеси”, которое обычно используется для композитов. Внутренние участки зерна и его граница рассматриваются как...
Gespeichert in:
| Veröffentlicht in: | Проблемы прочности |
|---|---|
| Datum: | 2015 |
| Hauptverfasser: | Zhang, X., Aifantis, E.C. |
| Format: | Artikel |
| Sprache: | Englisch |
| Veröffentlicht: |
Інститут проблем міцності ім. Г.С. Писаренко НАН України
2015
|
| Schlagworte: | |
| Online Zugang: | https://nasplib.isofts.kiev.ua/handle/123456789/173373 |
| Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
| Назва журналу: | Digital Library of Periodicals of National Academy of Sciences of Ukraine |
| Zitieren: | Non-Monotonous Mechanical Behavior at the Nanoscale: Elastic and Plastic Properties / X. Zhang, E.C. Aifantis // Проблемы прочности. — 2015. — № 4. — С. 157-167. — Бібліогр.: 23 назв. — англ. |
Institution
Digital Library of Periodicals of National Academy of Sciences of UkraineÄhnliche Einträge
Compression Behavior of Biodegradable Thermoplastic Plasticizer-Containing Composites
von: Guo, A.F., et al.
Veröffentlicht: (2019)
von: Guo, A.F., et al.
Veröffentlicht: (2019)
Numerical Simulation of Fatigue Damage and Shape Instability Behavior of Steel 40Cr by the Damage-Coupled Crystal Plastic Model
von: Wu, G.C., et al.
Veröffentlicht: (2017)
von: Wu, G.C., et al.
Veröffentlicht: (2017)
Mechanical properties and fracture behavior of high-strength steels
von: Musalek, R., et al.
Veröffentlicht: (2008)
von: Musalek, R., et al.
Veröffentlicht: (2008)
Assessment of the Microstructure and Mechanical Properties of a Laser-Joined Carbon Fiber-Reinforced Thermosetting Plastic and Stainless Steel
von: Sheng, L.Y., et al.
Veröffentlicht: (2018)
von: Sheng, L.Y., et al.
Veröffentlicht: (2018)
Investigation of Plastic Behavior of Alloyed Steel Deformed during Martensitic Transformation
von: Kandrotaitė-Janutienė, R., et al.
Veröffentlicht: (2016)
von: Kandrotaitė-Janutienė, R., et al.
Veröffentlicht: (2016)
Development of Strength and Yield Criteria Based on the Relationship between Elastic and Plastic Strains
von: Li, Y.
Veröffentlicht: (2014)
von: Li, Y.
Veröffentlicht: (2014)
Unified Solutions on Plastic Limit Internal Pressure for Metallic Elbows
von: Zhu, Q, et al.
Veröffentlicht: (2014)
von: Zhu, Q, et al.
Veröffentlicht: (2014)
Evaluation of the elastic-plastic mixity barameters on the base of different crack propagation criteria. Part 2. Solution and results
von: Shlyannikov, V.N., et al.
Veröffentlicht: (2005)
von: Shlyannikov, V.N., et al.
Veröffentlicht: (2005)
Evaluation of the elastic-plastic mixity parameters on the base of different crack propagation criteria. Part 1. Preliminary analysis
von: Shlyannikov, V.N., et al.
Veröffentlicht: (2005)
von: Shlyannikov, V.N., et al.
Veröffentlicht: (2005)
Modeling of the mechanical behavior of composite at different relative humidities
von: Naceri, A.
Veröffentlicht: (2009)
von: Naceri, A.
Veröffentlicht: (2009)
Shear Behavior of Non-Persistent Joint under High Normal Load
von: Sarfarazi, V., et al.
Veröffentlicht: (2017)
von: Sarfarazi, V., et al.
Veröffentlicht: (2017)
Effect of Double-Atom Vacancy Defects on the Elastic Properties of Single-Layered Graphene Sheets
von: Wang, Z.Q., et al.
Veröffentlicht: (2017)
von: Wang, Z.Q., et al.
Veröffentlicht: (2017)
Mechanical Behavior and Failure of Riveting Joints in Tensile and Shear Tests
von: Mucha, J., et al.
Veröffentlicht: (2015)
von: Mucha, J., et al.
Veröffentlicht: (2015)
Stress Distribution Behavior in Single-Lap Adhesively Bonded Beams
von: He, X., et al.
Veröffentlicht: (2014)
von: He, X., et al.
Veröffentlicht: (2014)
Multiscale Modeling-Based Assessment of Elastic Properties of SLGS-Polymer Nanocomposites with Double-Atom Vacancy Defects
von: Wang, Z.Q., et al.
Veröffentlicht: (2018)
von: Wang, Z.Q., et al.
Veröffentlicht: (2018)
Mechanical behavior and optimization of multidirectional laminate specimens under delamination by bending
von: Ahmed Benyahia, A., et al.
Veröffentlicht: (2006)
von: Ahmed Benyahia, A., et al.
Veröffentlicht: (2006)
Surface Strengthening Behavior of Magnesium Alloy with Laser Thermal Loading under Rapid Cooling
von: Ge, Y.Q., et al.
Veröffentlicht: (2018)
von: Ge, Y.Q., et al.
Veröffentlicht: (2018)
Annealing Effect on the Microstructure and Mechanical Properties of a Thin Titanium Nitride Film
von: Her, S.C., et al.
Veröffentlicht: (2014)
von: Her, S.C., et al.
Veröffentlicht: (2014)
Mechanical Properties of GF/pCBT Composites and Their Fusion-Bonded Joints: Influence of Process Parameters
von: Zhang, L., et al.
Veröffentlicht: (2015)
von: Zhang, L., et al.
Veröffentlicht: (2015)
Study on Non-Linear Flexural Behavior of Reinforced Concrete Beams Using ANSYS by Discrete Reinforcement Modeling
von: Vasudevan, G., et al.
Veröffentlicht: (2013)
von: Vasudevan, G., et al.
Veröffentlicht: (2013)
Constitutive Behavior of 4343/4A60 Aluminum Alloy at Multi-Pass Hot Deformation
von: Tang, C., et al.
Veröffentlicht: (2017)
von: Tang, C., et al.
Veröffentlicht: (2017)
Mechanical Behavior of the Weld Joints of Thick Steel Plates Produced by Various Welding Processes
von: Bang, HanSur, et al.
Veröffentlicht: (2015)
von: Bang, HanSur, et al.
Veröffentlicht: (2015)
Improved Dynamic Mechanical Properties of Modified PTFE Jet Penetrating Charge with Shell
von: Chang, B.H., et al.
Veröffentlicht: (2016)
von: Chang, B.H., et al.
Veröffentlicht: (2016)
Review: Progress in the Studies on Mechanical Properties of Materials
von: Tu, M.Y., et al.
Veröffentlicht: (2014)
von: Tu, M.Y., et al.
Veröffentlicht: (2014)
Review: Progress in the Studies on Mechanical Properties of Materials
von: Tu, M.Y., et al.
Veröffentlicht: (2014)
von: Tu, M.Y., et al.
Veröffentlicht: (2014)
Microstructure and Mechanical Properties of an Underwater Wet Welded Dissimilar Ferritic/Austenitic Steel Joint
von: Guo, N., et al.
Veröffentlicht: (2015)
von: Guo, N., et al.
Veröffentlicht: (2015)
High-Cycle Fatigue Properties and Damage Mechanism of Q345B Structural Steel
von: Hu, X.L., et al.
Veröffentlicht: (2017)
von: Hu, X.L., et al.
Veröffentlicht: (2017)
Comparison of the Effect of Different Heat Treatment Processes on Microstructure and Mechanical Properties of Stainless Steel Clad Plate
von: Jin, H.R., et al.
Veröffentlicht: (2017)
von: Jin, H.R., et al.
Veröffentlicht: (2017)
Numerical Simulation of the Damage Behavior of a Concrete Beam with an Anisotropic Damage Model
von: Long, Y.C., et al.
Veröffentlicht: (2018)
von: Long, Y.C., et al.
Veröffentlicht: (2018)
Localization of plastic deformation and fracture in aluminum polycrystals
von: Zarikovskaya, N.V., et al.
Veröffentlicht: (2008)
von: Zarikovskaya, N.V., et al.
Veröffentlicht: (2008)
Austenite Grain Growth Behavior of 20Mn5 Steel Used for Heavy Hydro-Generator Shaft
von: Liu, M., et al.
Veröffentlicht: (2018)
von: Liu, M., et al.
Veröffentlicht: (2018)
XFEM Simulation of Pore-Induced Fracture of a Heterogeneous Concrete Beam in Three-Point Bending
von: Zhang, C.C., et al.
Veröffentlicht: (2018)
von: Zhang, C.C., et al.
Veröffentlicht: (2018)
Friction and Wear Behavior of Wear-Resistant Belts in Drill Joints for Deep and Ultra-Deep Wells
von: Zhang, K., et al.
Veröffentlicht: (2018)
von: Zhang, K., et al.
Veröffentlicht: (2018)
The effect of damping and force application point on the non-linear dynamic behavior of a cracked beam at sub- and super-resonance vibrations
von: Bovsunovskii, A.P., et al.
Veröffentlicht: (2006)
von: Bovsunovskii, A.P., et al.
Veröffentlicht: (2006)
Isothermal Fatigue and Creep-Fatigue Interaction Behavior of Nickel-Base Directionally Solidified Superalloy
von: Haq, A.U., et al.
Veröffentlicht: (2018)
von: Haq, A.U., et al.
Veröffentlicht: (2018)
Experimental Investigation on Microstructure and Mechanical Properties of Direct Squeeze Cast Al–13%Si Alloy
von: Souissi, S., et al.
Veröffentlicht: (2012)
von: Souissi, S., et al.
Veröffentlicht: (2012)
Large-Scale Yielding Failure Prediction of Notched Ductile Plates by Means of the Linear Elastic Notch Fracture Mechanics
von: Torabi, A.R., et al.
Veröffentlicht: (2017)
von: Torabi, A.R., et al.
Veröffentlicht: (2017)
Effect of the Surface Texture on Laser Joining of a Carbon Fiber-Reinforced Thermosetting Plastic and Stainless Steel
von: Sheng, L.Y., et al.
Veröffentlicht: (2019)
von: Sheng, L.Y., et al.
Veröffentlicht: (2019)
Influence of Tantalum Addition on Microstructure and Mechanical Properties of the NiAl-Based Eutectic Alloy
von: Sheng, L.Y., et al.
Veröffentlicht: (2017)
von: Sheng, L.Y., et al.
Veröffentlicht: (2017)
A Probabilistic Model for Describing Short Fatigue Crack Growth Behavior of LZ50 Steel
von: Yang, B., et al.
Veröffentlicht: (2016)
von: Yang, B., et al.
Veröffentlicht: (2016)
Ähnliche Einträge
-
Compression Behavior of Biodegradable Thermoplastic Plasticizer-Containing Composites
von: Guo, A.F., et al.
Veröffentlicht: (2019) -
Numerical Simulation of Fatigue Damage and Shape Instability Behavior of Steel 40Cr by the Damage-Coupled Crystal Plastic Model
von: Wu, G.C., et al.
Veröffentlicht: (2017) -
Mechanical properties and fracture behavior of high-strength steels
von: Musalek, R., et al.
Veröffentlicht: (2008) -
Assessment of the Microstructure and Mechanical Properties of a Laser-Joined Carbon Fiber-Reinforced Thermosetting Plastic and Stainless Steel
von: Sheng, L.Y., et al.
Veröffentlicht: (2018) -
Investigation of Plastic Behavior of Alloyed Steel Deformed during Martensitic Transformation
von: Kandrotaitė-Janutienė, R., et al.
Veröffentlicht: (2016)