Investigation of Ultrasonic Assisted Friction Stir Spot Welding of Magnesium Alloy to Aluminum Alloy
A new welding method: ultrasonic assisted friction stir spot welding (UAFSSW) was put forward in the present study. UAFSSW was successfully applied to weld dissimilar AZ31 Mg alloy and 6061 Al alloy. Results show that for either conventional FSSW or UAFSSW, sound joints are obtained in the configura...
Збережено в:
| Опубліковано в: : | Проблемы прочности |
|---|---|
| Дата: | 2016 |
| Автори: | Ji, S.D., Li, Z.W., Ma, L., Yue, Y.M., Gao, S.S. |
| Формат: | Стаття |
| Мова: | Англійська |
| Опубліковано: |
Інститут проблем міцності ім. Г.С. Писаренко НАН України
2016
|
| Теми: | |
| Онлайн доступ: | https://nasplib.isofts.kiev.ua/handle/123456789/173412 |
| Теги: |
Додати тег
Немає тегів, Будьте першим, хто поставить тег для цього запису!
|
| Назва журналу: | Digital Library of Periodicals of National Academy of Sciences of Ukraine |
| Цитувати: | Investigation of Ultrasonic Assisted Friction Stir Spot Welding of Magnesium Alloy to Aluminum Alloy / S.D. Ji, Z.W. Li, L. Ma, Y.M. Yue, S.S. Gao // Проблемы прочности. — 2016. — № 1. — С. 7-12. — Бібліогр.: 18 назв. — англ. |
Репозитарії
Digital Library of Periodicals of National Academy of Sciences of UkraineСхожі ресурси
Thermo-mechanical processes in friction stir welding of magnesium alloy sheets
за авторством: М. А. Khokhlov, та інші
Опубліковано: (2024)
за авторством: М. А. Khokhlov, та інші
Опубліковано: (2024)
Application of friction stir method for joining of magnesium alloys and their structure modifying
за авторством: A. L. Majstrenko, та інші
Опубліковано: (2016)
за авторством: A. L. Majstrenko, та інші
Опубліковано: (2016)
Application of friction stir method for joining of magnesium alloys and their structure modifying
за авторством: G. M. Grigorenko, та інші
Опубліковано: (2016)
за авторством: G. M. Grigorenko, та інші
Опубліковано: (2016)
Determination of parameters of friction stir welding mode of aluminum-based alloy
за авторством: I. O. Vakulenko, та інші
Опубліковано: (2018)
за авторством: I. O. Vakulenko, та інші
Опубліковано: (2018)
The effect of friction stir welding on corrosion resistance of high strength aluminum alloys
за авторством: I. O. Hnatenko, та інші
Опубліковано: (2019)
за авторством: I. O. Hnatenko, та інші
Опубліковано: (2019)
Some advantages of welded joints of aluminum 1201 alloy produced by friction stir welding
за авторством: A. H. Pokliatskyi, та інші
Опубліковано: (2021)
за авторством: A. H. Pokliatskyi, та інші
Опубліковано: (2021)
Fatigue behavior of dissimilar friction stir welds between cast and wrought aluminum alloys
за авторством: Uematsu, Y., та інші
Опубліковано: (2008)
за авторством: Uematsu, Y., та інші
Опубліковано: (2008)
Friction stir welding of aluminium alloys of different systems of alloying
за авторством: A. G. Pokljatskij, та інші
Опубліковано: (2010)
за авторством: A. G. Pokljatskij, та інші
Опубліковано: (2010)
Optimization of friction stir welding parameters for magnesium alloy AZ91D using Taguchi design
за авторством: Senthilraja, R., та інші
Опубліковано: (2015)
за авторством: Senthilraja, R., та інші
Опубліковано: (2015)
Properties of butt joints of fine-sheet aluminum-lithium 1460 alloy, produced by friction stir and TIG welding
за авторством: A. H. Pokliatskyi, та інші
Опубліковано: (2021)
за авторством: A. H. Pokliatskyi, та інші
Опубліковано: (2021)
Friction stir welding of composite, granulated and quasicrystalline aluminium alloys
за авторством: A. G. Pokljatskij, та інші
Опубліковано: (2011)
за авторством: A. G. Pokljatskij, та інші
Опубліковано: (2011)
Prediction of parameters of friction stir welding of sheet aluminium alloys
за авторством: A. G. Pokljatskij
Опубліковано: (2019)
за авторством: A. G. Pokljatskij
Опубліковано: (2019)
Hybrid technology combining electron beam welding and friction stir welding in the processes of repair of aircraft structure elements of magnesium alloys
за авторством: A. L. Majstrenko, та інші
Опубліковано: (2016)
за авторством: A. L. Majstrenko, та інші
Опубліковано: (2016)
Physico-mechanical properties of thin-sheet aluminum alloy D16 butt joints produced by friction stir welding
за авторством: A. G. Pokljatskij, та інші
Опубліковано: (2017)
за авторством: A. G. Pokljatskij, та інші
Опубліковано: (2017)
Modeling of heat processes for improvement of structure of metals and alloys in friction stir welding
за авторством: A. L. Majstrenko, та інші
Опубліковано: (2015)
за авторством: A. L. Majstrenko, та інші
Опубліковано: (2015)
Mathematical model of determination of residual stresses and strains in friction stir welding of aluminium alloy
за авторством: B. R. Tsaryk, та інші
Опубліковано: (2022)
за авторством: B. R. Tsaryk, та інші
Опубліковано: (2022)
Strength of welded joints of heat-hardenable aluminium alloys in tig and friction stir welding
за авторством: A. G. Pokljatskij, та інші
Опубліковано: (2019)
за авторством: A. G. Pokljatskij, та інші
Опубліковано: (2019)
Friction and Wear of Aluminum Alloy Reinforced by Ti0₂ Particles
за авторством: Sarajan, Z.
Опубліковано: (2013)
за авторством: Sarajan, Z.
Опубліковано: (2013)
Friction and Wear of Aluminum Alloy Reinforced by Ti02 Particles
за авторством: Z. Sarajan
Опубліковано: (2013)
за авторством: Z. Sarajan
Опубліковано: (2013)
Characteristics of structural strength of D16T alloy welded joints, produced by friction stir welding
за авторством: A. G. Pokljatskij, та інші
Опубліковано: (2018)
за авторством: A. G. Pokljatskij, та інші
Опубліковано: (2018)
Peculiarities of distribution of temperatures in thinsheet aluminium alloy AMg5M in friction stir welding
за авторством: A. G. Pokljatskij
Опубліковано: (2011)
за авторством: A. G. Pokljatskij
Опубліковано: (2011)
Peculiarities and advantages of friction stir welding of butt joints of thin-sheet aluminium-lithium alloys
за авторством: A. G. Pokljatskij, та інші
Опубліковано: (2016)
за авторством: A. G. Pokljatskij, та інші
Опубліковано: (2016)
Microstructure and Salt Fog Corrosion Behaviour of AA2219 Friction Stir Welded Aluminium Alloy
за авторством: Srinivasa Rao, G., та інші
Опубліковано: (2015)
за авторством: Srinivasa Rao, G., та інші
Опубліковано: (2015)
Mechanical Properties of Dissimilar A356/SAPH440 Lap Joints by the Friction Stir Spot Welding and Self-Piercing Riveting
за авторством: Bang, Han Sur, та інші
Опубліковано: (2018)
за авторством: Bang, Han Sur, та інші
Опубліковано: (2018)
The investigation of friction and wear characteristics of ion-plasma coatings, received on the aluminum alloy
за авторством: C. F. Dudnik, та інші
Опубліковано: (2004)
за авторством: C. F. Dudnik, та інші
Опубліковано: (2004)
Strength and structure of aluminium alloy welded joints produced by friction stir welding and non-consumable electrode welding
за авторством: A. G. Pokljatskij, та інші
Опубліковано: (2009)
за авторством: A. G. Pokljatskij, та інші
Опубліковано: (2009)
Strength and structure of butt, overlap and fillet joints of AMg6M alloy produced by friction stir welding
за авторством: A. H. Pokliatskyi, та інші
Опубліковано: (2023)
за авторством: A. H. Pokliatskyi, та інші
Опубліковано: (2023)
Effect of plate thickness on weld speed in friction stir welding of AA6061-T6 Al-alloy plates
за авторством: G. Ipekoglu, та інші
Опубліковано: (2018)
за авторством: G. Ipekoglu, та інші
Опубліковано: (2018)
Effect of structure on properties of aluminium-lithium alloy welded joints produced by argonarc and friction stir welding methods
за авторством: L. I. Markashova, та інші
Опубліковано: (2016)
за авторством: L. I. Markashova, та інші
Опубліковано: (2016)
The resistance to stress corrosion cracking of the AMg5M alloy joints received by TIG and friction stir welding
за авторством: A. G. Pokljatskij, та інші
Опубліковано: (2015)
за авторством: A. G. Pokljatskij, та інші
Опубліковано: (2015)
Biodegradable magnesium alloys for medical application
за авторством: Papirov, I.I., та інші
Опубліковано: (2008)
за авторством: Papirov, I.I., та інші
Опубліковано: (2008)
Hardening of magnesium alloy ML4 in alloying with gallium
за авторством: M. A. Khokhlov, та інші
Опубліковано: (2017)
за авторством: M. A. Khokhlov, та інші
Опубліковано: (2017)
Friction stir welding in aerospace industry (Review)
за авторством: E. V. Sergeeva
Опубліковано: (2013)
за авторством: E. V. Sergeeva
Опубліковано: (2013)
Ultrasonic assisted nanomanipulations with atomic force microscope
за авторством: Lytvyn, P.M., та інші
Опубліковано: (2010)
за авторством: Lytvyn, P.M., та інші
Опубліковано: (2010)
Ultrasonic assisted nanomanipulations with atomic force microscope
за авторством: P. M. Lytvyn, та інші
Опубліковано: (2010)
за авторством: P. M. Lytvyn, та інші
Опубліковано: (2010)
Effect of Tungsten-Inert-Gas Preheating on Mechanical and Microstructure Properties of Friction Stir Welded Dissimilar Al Alloy and Mild Steel
за авторством: Bang, HanSur, та інші
Опубліковано: (2016)
за авторством: Bang, HanSur, та інші
Опубліковано: (2016)
Some advantages of butt joints of sheet deformable aluminium alloys AMg5M and AMg6M alloys, produced by friction stir welding, compared to TIG
за авторством: A. G. Pokljatskij, та інші
Опубліковано: (2015)
за авторством: A. G. Pokljatskij, та інші
Опубліковано: (2015)
Physics of microyield of magnesium alloys with titanium
за авторством: V. G. Tkachenko, та інші
Опубліковано: (2010)
за авторством: V. G. Tkachenko, та інші
Опубліковано: (2010)
Perspectives of bioabsorbable magnesium alloys for osteosynthesis
за авторством: V. A. Shalomieiev, та інші
Опубліковано: (2017)
за авторством: V. A. Shalomieiev, та інші
Опубліковано: (2017)
Alloy Zr1Nb based on magnesium-thermal zirconium
за авторством: Lavrinenko, S.D., та інші
Опубліковано: (2016)
за авторством: Lavrinenko, S.D., та інші
Опубліковано: (2016)
Схожі ресурси
-
Thermo-mechanical processes in friction stir welding of magnesium alloy sheets
за авторством: М. А. Khokhlov, та інші
Опубліковано: (2024) -
Application of friction stir method for joining of magnesium alloys and their structure modifying
за авторством: A. L. Majstrenko, та інші
Опубліковано: (2016) -
Application of friction stir method for joining of magnesium alloys and their structure modifying
за авторством: G. M. Grigorenko, та інші
Опубліковано: (2016) -
Determination of parameters of friction stir welding mode of aluminum-based alloy
за авторством: I. O. Vakulenko, та інші
Опубліковано: (2018) -
The effect of friction stir welding on corrosion resistance of high strength aluminum alloys
за авторством: I. O. Hnatenko, та інші
Опубліковано: (2019)