Microstructure and Wear Properties of the Quasi-Rapidly Solidified NiAl/ Cr(Mo,Dy) Hypoeutectic Alloy
The NiAl/Cr(Mo,Dy) hypoeutectic alloy was prepared by quasi-rapid solidification to investigate its microstructure and wear behavior. The results revealed that the quasi-rapid solidification refined the eutectic cell and NiAl/Cr(Mo) eutectic structure obviously. The alloy was composed of primary NiA...
Gespeichert in:
| Veröffentlicht in: | Проблемы прочности |
|---|---|
| Datum: | 2016 |
| 1. Verfasser: | |
| Format: | Artikel |
| Sprache: | English |
| Veröffentlicht: |
Інститут проблем міцності ім. Г.С. Писаренко НАН України
2016
|
| Schlagworte: | |
| Online Zugang: | https://nasplib.isofts.kiev.ua/handle/123456789/173425 |
| Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
| Назва журналу: | Digital Library of Periodicals of National Academy of Sciences of Ukraine |
| Zitieren: | Microstructure and Wear Properties of the Quasi-Rapidly Solidified NiAl/ Cr(Mo,Dy) Hypoeutectic Alloy / L.Y. Sheng // Проблемы прочности. — 2016. — № 1. — С. 124-129. — Бібліогр.: 19 назв. — англ. |
Institution
Digital Library of Periodicals of National Academy of Sciences of Ukraine| Zusammenfassung: | The NiAl/Cr(Mo,Dy) hypoeutectic alloy was prepared by quasi-rapid solidification to investigate its microstructure and wear behavior. The results revealed that the quasi-rapid solidification refined the eutectic cell and NiAl/Cr(Mo) eutectic structure obviously. The alloy was composed of primary NiAl, fine NiAl/Cr(Mo) eutectic lamella and Ni5Dy phase. Compression test showed that the quasi-rapid solidification improved the mechanical properties of the alloy obviously. Wear test exhibited that alloy possessed excellent wear properties at about 1073 K, which should be ascribed to the lubricant film formed by amorphous and Cr₂O₃ and Al₂O₃ nanoparticles. The alloy also exhibited relative good wear properties at 673 K, which should be attributed to its high strength.
|
|---|---|
| ISSN: | 0556-171X |