Microstructure and Wear Properties of the Quasi-Rapidly Solidified NiAl/ Cr(Mo,Dy) Hypoeutectic Alloy
The NiAl/Cr(Mo,Dy) hypoeutectic alloy was prepared by quasi-rapid solidification to investigate its microstructure and wear behavior. The results revealed that the quasi-rapid solidification refined the eutectic cell and NiAl/Cr(Mo) eutectic structure obviously. The alloy was composed of primary NiA...
Збережено в:
| Опубліковано в: : | Проблемы прочности |
|---|---|
| Дата: | 2016 |
| Автор: | |
| Формат: | Стаття |
| Мова: | Англійська |
| Опубліковано: |
Інститут проблем міцності ім. Г.С. Писаренко НАН України
2016
|
| Теми: | |
| Онлайн доступ: | https://nasplib.isofts.kiev.ua/handle/123456789/173425 |
| Теги: |
Додати тег
Немає тегів, Будьте першим, хто поставить тег для цього запису!
|
| Назва журналу: | Digital Library of Periodicals of National Academy of Sciences of Ukraine |
| Цитувати: | Microstructure and Wear Properties of the Quasi-Rapidly Solidified NiAl/ Cr(Mo,Dy) Hypoeutectic Alloy / L.Y. Sheng // Проблемы прочности. — 2016. — № 1. — С. 124-129. — Бібліогр.: 19 назв. — англ. |
Репозитарії
Digital Library of Periodicals of National Academy of Sciences of Ukraine| _version_ | 1862719027900579840 |
|---|---|
| author | Sheng, L.Y. |
| author_facet | Sheng, L.Y. |
| citation_txt | Microstructure and Wear Properties of the Quasi-Rapidly Solidified NiAl/ Cr(Mo,Dy) Hypoeutectic Alloy / L.Y. Sheng // Проблемы прочности. — 2016. — № 1. — С. 124-129. — Бібліогр.: 19 назв. — англ. |
| collection | DSpace DC |
| container_title | Проблемы прочности |
| description | The NiAl/Cr(Mo,Dy) hypoeutectic alloy was prepared by quasi-rapid solidification to investigate its microstructure and wear behavior. The results revealed that the quasi-rapid solidification refined the eutectic cell and NiAl/Cr(Mo) eutectic structure obviously. The alloy was composed of primary NiAl, fine NiAl/Cr(Mo) eutectic lamella and Ni5Dy phase. Compression test showed that the quasi-rapid solidification improved the mechanical properties of the alloy obviously. Wear test exhibited that alloy possessed excellent wear properties at about 1073 K, which should be ascribed to the lubricant film formed by amorphous and Cr₂O₃ and Al₂O₃ nanoparticles. The alloy also exhibited relative good wear properties at 673 K, which should be attributed to its high strength.
|
| first_indexed | 2025-12-07T18:18:37Z |
| format | Article |
| fulltext | |
| id | nasplib_isofts_kiev_ua-123456789-173425 |
| institution | Digital Library of Periodicals of National Academy of Sciences of Ukraine |
| issn | 0556-171X |
| language | English |
| last_indexed | 2025-12-07T18:18:37Z |
| publishDate | 2016 |
| publisher | Інститут проблем міцності ім. Г.С. Писаренко НАН України |
| record_format | dspace |
| spelling | Sheng, L.Y. 2020-12-03T20:52:40Z 2020-12-03T20:52:40Z 2016 Microstructure and Wear Properties of the Quasi-Rapidly Solidified NiAl/ Cr(Mo,Dy) Hypoeutectic Alloy / L.Y. Sheng // Проблемы прочности. — 2016. — № 1. — С. 124-129. — Бібліогр.: 19 назв. — англ. 0556-171X https://nasplib.isofts.kiev.ua/handle/123456789/173425 539.4 The NiAl/Cr(Mo,Dy) hypoeutectic alloy was prepared by quasi-rapid solidification to investigate its microstructure and wear behavior. The results revealed that the quasi-rapid solidification refined the eutectic cell and NiAl/Cr(Mo) eutectic structure obviously. The alloy was composed of primary NiAl, fine NiAl/Cr(Mo) eutectic lamella and Ni5Dy phase. Compression test showed that the quasi-rapid solidification improved the mechanical properties of the alloy obviously. Wear test exhibited that alloy possessed excellent wear properties at about 1073 K, which should be ascribed to the lubricant film formed by amorphous and Cr₂O₃ and Al₂O₃ nanoparticles. The alloy also exhibited relative good wear properties at 673 K, which should be attributed to its high strength. The authors are grateful to the Strategic New Industry Development Special Foundation of Shenzhen (JCYJ20140419114548515), the Shenzhen International Cooperative Research Project (GJHZ20140419114548516) and the Shenzhen Technology Innovation Plan (CXZZ20140419114548507) for financial support. en Інститут проблем міцності ім. Г.С. Писаренко НАН України Проблемы прочности Научно-технический раздел Microstructure and Wear Properties of the Quasi-Rapidly Solidified NiAl/ Cr(Mo,Dy) Hypoeutectic Alloy Микроструктура и износостойкость сплава NiAl/Cr(Mo,Dy), полученного методом псевдобыстрой кристаллизации Article published earlier |
| spellingShingle | Microstructure and Wear Properties of the Quasi-Rapidly Solidified NiAl/ Cr(Mo,Dy) Hypoeutectic Alloy Sheng, L.Y. Научно-технический раздел |
| title | Microstructure and Wear Properties of the Quasi-Rapidly Solidified NiAl/ Cr(Mo,Dy) Hypoeutectic Alloy |
| title_alt | Микроструктура и износостойкость сплава NiAl/Cr(Mo,Dy), полученного методом псевдобыстрой кристаллизации |
| title_full | Microstructure and Wear Properties of the Quasi-Rapidly Solidified NiAl/ Cr(Mo,Dy) Hypoeutectic Alloy |
| title_fullStr | Microstructure and Wear Properties of the Quasi-Rapidly Solidified NiAl/ Cr(Mo,Dy) Hypoeutectic Alloy |
| title_full_unstemmed | Microstructure and Wear Properties of the Quasi-Rapidly Solidified NiAl/ Cr(Mo,Dy) Hypoeutectic Alloy |
| title_short | Microstructure and Wear Properties of the Quasi-Rapidly Solidified NiAl/ Cr(Mo,Dy) Hypoeutectic Alloy |
| title_sort | microstructure and wear properties of the quasi-rapidly solidified nial/ cr(mo,dy) hypoeutectic alloy |
| topic | Научно-технический раздел |
| topic_facet | Научно-технический раздел |
| url | https://nasplib.isofts.kiev.ua/handle/123456789/173425 |
| work_keys_str_mv | AT shengly microstructureandwearpropertiesofthequasirapidlysolidifiednialcrmodyhypoeutecticalloy AT shengly mikrostrukturaiiznosostoikostʹsplavanialcrmodypolučennogometodompsevdobystroikristallizacii |