Study on the Compression Moulding of Intercrossed Pre-Preg Glass FiberReinforced Plastic
In this paper, pre-preg intercrossed GFRP composite is cut in the square and undergone through hot compression moulding. During this process, flow front of actual sample and simulation results with finite element method (FEM) is compared. Pre-preg intercrossed GFRP composite is made of stacking plai...
Gespeichert in:
| Veröffentlicht in: | Проблемы прочности |
|---|---|
| Datum: | 2016 |
| 1. Verfasser: | Kim, J.W. |
| Format: | Artikel |
| Sprache: | Englisch |
| Veröffentlicht: |
Інститут проблем міцності ім. Г.С. Писаренко НАН України
2016
|
| Schlagworte: | |
| Online Zugang: | https://nasplib.isofts.kiev.ua/handle/123456789/173426 |
| Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
| Назва журналу: | Digital Library of Periodicals of National Academy of Sciences of Ukraine |
| Zitieren: | Study on the Compression Moulding of Intercrossed Pre-Preg Glass FiberReinforced Plastic / J.W. Kim // Проблемы прочности. — 2016. — № 1. — С. 130-137. — Бібліогр.: 14 назв. — англ. |
Institution
Digital Library of Periodicals of National Academy of Sciences of UkraineÄhnliche Einträge
Strength Degradation of Glass Fiber Reinforced Polymer Bars Subjected to Reversed Cyclic Load
von: J. Y. Lee, et al.
Veröffentlicht: (2014)
von: J. Y. Lee, et al.
Veröffentlicht: (2014)
Strength Degradation of Glass Fiber Reinforced Polymer Bars Subjected to Reversed Cyclic Load
von: Lee, J.Y., et al.
Veröffentlicht: (2014)
von: Lee, J.Y., et al.
Veröffentlicht: (2014)
Mechanical Properties and Machinability of Glass Fiber-Reinforced Polyetheretherketone
von: Ji, S.J., et al.
Veröffentlicht: (2015)
von: Ji, S.J., et al.
Veröffentlicht: (2015)
Prediction of fiber-reinforced concrete strength under compression
von: V. P. Sylovaniuk, et al.
Veröffentlicht: (2016)
von: V. P. Sylovaniuk, et al.
Veröffentlicht: (2016)
Study of influence of structurizing regims on the properties of structural glass-fiber plastics
von: Karandashov, O.H., et al.
Veröffentlicht: (2018)
von: Karandashov, O.H., et al.
Veröffentlicht: (2018)
Investigation of thermal stability organic plastics based of polysulfonamide reinforced by fiber Kevlar
von: A. I. Burja, et al.
Veröffentlicht: (2015)
von: A. I. Burja, et al.
Veröffentlicht: (2015)
Experimental Analysis of the Influence of Structural Parameters on the Behavior of Glass-Fiber Reinforced Polypropylene Composites
von: Bounouas, L., et al.
Veröffentlicht: (2001)
von: Bounouas, L., et al.
Veröffentlicht: (2001)
Effect of the Surface Texture on Laser Joining of a Carbon Fiber-Reinforced Thermosetting Plastic and Stainless Steel
von: Sheng, L.Y., et al.
Veröffentlicht: (2019)
von: Sheng, L.Y., et al.
Veröffentlicht: (2019)
Examination of the cracking resistance of corrosionresisting glass-reinforced plastics by acoustic emission methods
von: Naumets, V.N., et al.
Veröffentlicht: (1985)
von: Naumets, V.N., et al.
Veröffentlicht: (1985)
Assessment of the Microstructure and Mechanical Properties of a Laser-Joined Carbon Fiber-Reinforced Thermosetting Plastic and Stainless Steel
von: Sheng, L.Y., et al.
Veröffentlicht: (2018)
von: Sheng, L.Y., et al.
Veröffentlicht: (2018)
Compression Behavior of Biodegradable Thermoplastic Plasticizer-Containing Composites
von: Guo, A.F., et al.
Veröffentlicht: (2019)
von: Guo, A.F., et al.
Veröffentlicht: (2019)
Nano-sized phase inclusions in As₂S₃ glass, films and fibers based on this glass
von: Mateleshko, N., et al.
Veröffentlicht: (2004)
von: Mateleshko, N., et al.
Veröffentlicht: (2004)
Research of structure and properties polytetrafluoroethylene reinforced fiber arselon
von: A. I. Burja, et al.
Veröffentlicht: (2017)
von: A. I. Burja, et al.
Veröffentlicht: (2017)
CT study of products from non-metallic composites reinforced by carbon fibers
von: Levenets, V.V., et al.
Veröffentlicht: (2022)
von: Levenets, V.V., et al.
Veröffentlicht: (2022)
Identification of fracture mechanisms of cement mortar reinforced with basalt and polypropylene fibers
von: V. R. Skalskyi, et al.
Veröffentlicht: (2020)
von: V. R. Skalskyi, et al.
Veröffentlicht: (2020)
Strength of optical glass under conditions of axial compression
von: Okhrimenko, G.M., et al.
Veröffentlicht: (1985)
von: Okhrimenko, G.M., et al.
Veröffentlicht: (1985)
Methods of strength and life time evaluation of fiber reinforced concretes (A review)
von: Ye. Andreikiv, et al.
Veröffentlicht: (2018)
von: Ye. Andreikiv, et al.
Veröffentlicht: (2018)
Improvement of Strength and Radiation Protection Properties of Biodegradable Jute Fiber Reinforced Material
von: Verma, S., et al.
Veröffentlicht: (2017)
von: Verma, S., et al.
Veröffentlicht: (2017)
Ground of parameters of methods of decline of noise in mould workshops of enterprises on production of reinforced concrete wares
von: I. M. Parashchiienko
Veröffentlicht: (2015)
von: I. M. Parashchiienko
Veröffentlicht: (2015)
Plasma bromination as pre-treatment of carbon fiber for acid-base catalyst preparation
von: L. M. Grishchenko, et al.
Veröffentlicht: (2015)
von: L. M. Grishchenko, et al.
Veröffentlicht: (2015)
Evaluating Mechanical Properties of Macro-Synthetic Fiber-Reinforced Concrete with Various Types and Contents
von: Daneshfar, M., et al.
Veröffentlicht: (2017)
von: Daneshfar, M., et al.
Veröffentlicht: (2017)
Dynamic Testing of Reinforced Glass Fibre-Epoxy Composite at Elevated Temperatures
von: Gieleta, R., et al.
Veröffentlicht: (2002)
von: Gieleta, R., et al.
Veröffentlicht: (2002)
The mechanical performance of glass fibre reinforced composite based sandwich structure
von: Xiaoli Zhu
Veröffentlicht: (2018)
von: Xiaoli Zhu
Veröffentlicht: (2018)
Numerical Study of Stability Loss of Near-thesurface Short Fibers in a Purely Reinforced Compossite Material
von: V. A. Dekret, et al.
Veröffentlicht: (2021)
von: V. A. Dekret, et al.
Veröffentlicht: (2021)
Compressive Properties of SiC Particle-Reinforced Aluminum Matrix Composites under Repeated Impact Loading
von: Cao, D.F., et al.
Veröffentlicht: (2015)
von: Cao, D.F., et al.
Veröffentlicht: (2015)
Stability Loss of Layered Composite under Compression of Reinforcing Layers by Surface Load
von: V. M. Bystrov, et al.
Veröffentlicht: (2017)
von: V. M. Bystrov, et al.
Veröffentlicht: (2017)
Elasto-Plastic Behavior of Aluminum Foams Subjected to Compression Loading
von: H. M. Silva, et al.
Veröffentlicht: (2017)
von: H. M. Silva, et al.
Veröffentlicht: (2017)
The process monitoring of a diameter of mode field of one-mode glass fibers
von: Sh. Nevljudov, et al.
Veröffentlicht: (1998)
von: Sh. Nevljudov, et al.
Veröffentlicht: (1998)
Identification method of structural defects in glass fiber fabric/epoxy resin laminate
von: Naceri, A.
Veröffentlicht: (2009)
von: Naceri, A.
Veröffentlicht: (2009)
Evaluation of crack growth resistance characteristics in unidirectional glass-plastics
von: M. M. Hvozdiuk, et al.
Veröffentlicht: (2012)
von: M. M. Hvozdiuk, et al.
Veröffentlicht: (2012)
Self-hardening liquid glass moulding core sands used for casting manufacturing of power-generating equipment
von: A. K. Davidenko, et al.
Veröffentlicht: (2018)
von: A. K. Davidenko, et al.
Veröffentlicht: (2018)
Optimum Design of Reinforced Cylindrical Shells Under Combined Axial Compression and Internal Pressure
von: H. V. Filatov
Veröffentlicht: (2021)
von: H. V. Filatov
Veröffentlicht: (2021)
Optimum Design of Reinforced Cylindrical Shells Under Combined Axial Compression and Internal Pressure
von: Filatov, Heorhii V.
Veröffentlicht: (2021)
von: Filatov, Heorhii V.
Veröffentlicht: (2021)
Optimum Design of Reinforced Cylindrical Shells Under Combined Axial Compression and Internal Pressure
von: Filatov, Heorhii V.
Veröffentlicht: (2021)
von: Filatov, Heorhii V.
Veröffentlicht: (2021)
Spectroscopic features of raman gain profiles in single-mode fibers based on silica glass
von: I. V. Serdeha, et al.
Veröffentlicht: (2018)
von: I. V. Serdeha, et al.
Veröffentlicht: (2018)
Spectroscopic features of raman gain profiles in single-mode fibers based on silica glass
von: I. V. Serdeha, et al.
Veröffentlicht: (2018)
von: I. V. Serdeha, et al.
Veröffentlicht: (2018)
Finite Element Analysis of Thermoelastic Fiber-Reinforced Anisotropic Hollow Cylinder with Dual-Phase-Lag Model
von: Hobiny, A.D., et al.
Veröffentlicht: (2018)
von: Hobiny, A.D., et al.
Veröffentlicht: (2018)
Experimental and Numerical Analysis of Normal and Lateral High-Velocity Impacts on Carbon Fiber-Reinforced Polymer Laminates
von: Huang, T., et al.
Veröffentlicht: (2016)
von: Huang, T., et al.
Veröffentlicht: (2016)
Plastic exfoliation of square-shaped fiber under shear load in the presence of interfacial cracks
von: V. A. Kryven, et al.
Veröffentlicht: (2014)
von: V. A. Kryven, et al.
Veröffentlicht: (2014)
The Effect of Hydrostatic Initial Stress on the Plane Waves in a Fiber-Reinforced Magneto-Thermoelastic Medium with Fractional Derivative Heat Transfer
von: N. Sarkar, et al.
Veröffentlicht: (2016)
von: N. Sarkar, et al.
Veröffentlicht: (2016)
Ähnliche Einträge
-
Strength Degradation of Glass Fiber Reinforced Polymer Bars Subjected to Reversed Cyclic Load
von: J. Y. Lee, et al.
Veröffentlicht: (2014) -
Strength Degradation of Glass Fiber Reinforced Polymer Bars Subjected to Reversed Cyclic Load
von: Lee, J.Y., et al.
Veröffentlicht: (2014) -
Mechanical Properties and Machinability of Glass Fiber-Reinforced Polyetheretherketone
von: Ji, S.J., et al.
Veröffentlicht: (2015) -
Prediction of fiber-reinforced concrete strength under compression
von: V. P. Sylovaniuk, et al.
Veröffentlicht: (2016) -
Study of influence of structurizing regims on the properties of structural glass-fiber plastics
von: Karandashov, O.H., et al.
Veröffentlicht: (2018)