Comparative Analysis of Crack Resistance of Fiber Metal Laminates with HS2 Glass/T700 Carbon Layers for Various Stress Ratios
Because of good crack growth resistance owe to the fibers between the aluminum layers, fiber metal laminates (FML) offer significant improvements compared to currently applied materials for aircraft structures. The crack resistance of different reinforced fibers, glass fiber, and carbon fiber, under...
Gespeichert in:
| Veröffentlicht in: | Проблемы прочности |
|---|---|
| Datum: | 2016 |
| ISSN: | 0556-171X |
| Hauptverfasser: | Song, X., Li, Z.Y, Shen, Y., Chen, Y.L., Zhang, J.Z. |
| Format: | Artikel |
| Sprache: | Englisch |
| Veröffentlicht: |
Інститут проблем міцності ім. Г.С. Писаренко НАН України
2016
|
| Schlagworte: | |
| Online Zugang: | https://nasplib.isofts.kiev.ua/handle/123456789/173427 |
| Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
| Назва журналу: | Digital Library of Periodicals of National Academy of Sciences of Ukraine |
| Zitieren: | Comparative Analysis of Crack Resistance of Fiber Metal Laminates with HS2 Glass/T700 Carbon Layers for Various Stress Ratios / X. Song, Z.Y. Li, Y. Shen, Y.L. Chen, J.Z. Zhang // Проблемы прочности. — 2016. — № 1. — С. 138-144. — Бібліогр.: 9 назв. — англ. |
Institution
Digital Library of Periodicals of National Academy of Sciences of UkraineÄhnliche Einträge
Experimental and Numerical Analysis of Normal and Lateral High-Velocity Impacts on Carbon Fiber-Reinforced Polymer Laminates
von: Huang, T., et al.
Veröffentlicht: (2016)
von: Huang, T., et al.
Veröffentlicht: (2016)
Identification method of structural defects in glass fiber fabric/epoxy resin laminate
von: Naceri, A.
Veröffentlicht: (2009)
von: Naceri, A.
Veröffentlicht: (2009)
Mechanical Properties of Thermoplastic Variable-Angle Composite Laminations for Conical Shells
von: Han, Z.Y., et al.
Veröffentlicht: (2014)
von: Han, Z.Y., et al.
Veröffentlicht: (2014)
Analysis of Fatigue and Crack Growth in Carbon-Fiber Epoxy Matrix Composite Laminates
von: Putic, S., et al.
Veröffentlicht: (2003)
von: Putic, S., et al.
Veröffentlicht: (2003)
Stacking Sequence Effect on the Fracture Behavior of Narrow L-Shaped Cross-Ply Laminates: Experimental Study
von: Pan, Z.Y., et al.
Veröffentlicht: (2018)
von: Pan, Z.Y., et al.
Veröffentlicht: (2018)
Mechanical Properties of Thermoplastic Variable-Angle Composite Laminations for Conical Shells
von: Z. Y. Han, et al.
Veröffentlicht: (2014)
von: Z. Y. Han, et al.
Veröffentlicht: (2014)
Nano-sized phase inclusions in As₂S₃ glass, films and fibers based on this glass
von: Mateleshko, N., et al.
Veröffentlicht: (2004)
von: Mateleshko, N., et al.
Veröffentlicht: (2004)
Strength Degradation of Glass Fiber Reinforced Polymer Bars Subjected to Reversed Cyclic Load
von: J. Y. Lee, et al.
Veröffentlicht: (2014)
von: J. Y. Lee, et al.
Veröffentlicht: (2014)
Strength Degradation of Glass Fiber Reinforced Polymer Bars Subjected to Reversed Cyclic Load
von: Lee, J.Y., et al.
Veröffentlicht: (2014)
von: Lee, J.Y., et al.
Veröffentlicht: (2014)
Mechanical Properties and Machinability of Glass Fiber-Reinforced Polyetheretherketone
von: Ji, S.J., et al.
Veröffentlicht: (2015)
von: Ji, S.J., et al.
Veröffentlicht: (2015)
Stacking layer sequence effects for glass fibre/epoxy resin cross-ply laminates
von: Harkati, E.H., et al.
Veröffentlicht: (2007)
von: Harkati, E.H., et al.
Veröffentlicht: (2007)
Some properties of various graphs associated with finite groups
von: Chen, X.Y., et al.
Veröffentlicht: (2021)
von: Chen, X.Y., et al.
Veröffentlicht: (2021)
Experimental Analysis of the Influence of Structural Parameters on the Behavior of Glass-Fiber Reinforced Polypropylene Composites
von: Bounouas, L., et al.
Veröffentlicht: (2001)
von: Bounouas, L., et al.
Veröffentlicht: (2001)
Numerical Simulation of the Inlet/Outlet Pressure Ratio Effect on the Heat Transfer Coefficient in an Air Turbine Cascade
von: He, Z., et al.
Veröffentlicht: (2019)
von: He, Z., et al.
Veröffentlicht: (2019)
Effect of the Ba/Sr ratio on the optical properties of phosphate laser glass
von: Popov, A.S., et al.
Veröffentlicht: (2016)
von: Popov, A.S., et al.
Veröffentlicht: (2016)
Untitled
von: Z. Shen, et al.
Veröffentlicht: (2016)
von: Z. Shen, et al.
Veröffentlicht: (2016)
Study of influence of structurizing regims on the properties of structural glass-fiber plastics
von: Karandashov, O.H., et al.
Veröffentlicht: (2018)
von: Karandashov, O.H., et al.
Veröffentlicht: (2018)
Flexural Fracture Toughness and First-Crack Strength Tests of Steel Fiber-Silica Fume Concrete and Its Engineering Applications
von: Zhang, J.P., et al.
Veröffentlicht: (2018)
von: Zhang, J.P., et al.
Veröffentlicht: (2018)
Sharacter of thermooxidative degradation of epoxy compositions with various ratios of grafted multiprotons mineral and carboxylic acids
von: Ye. V. Lobko, et al.
Veröffentlicht: (2013)
von: Ye. V. Lobko, et al.
Veröffentlicht: (2013)
Surface hardening of fast-cutting HS6-5-2 steel under chemical heat treatment
von: M. Pashechko, et al.
Veröffentlicht: (2016)
von: M. Pashechko, et al.
Veröffentlicht: (2016)
Residual Strains of Filter Materials Reinforced with Grid Inclusions under Cyclic Loading
von: Lin, Y.L., et al.
Veröffentlicht: (2015)
von: Lin, Y.L., et al.
Veröffentlicht: (2015)
The process monitoring of a diameter of mode field of one-mode glass fibers
von: Sh. Nevljudov, et al.
Veröffentlicht: (1998)
von: Sh. Nevljudov, et al.
Veröffentlicht: (1998)
Study on the Compression Moulding of Intercrossed Pre-Preg Glass FiberReinforced Plastic
von: Kim, J.W.
Veröffentlicht: (2016)
von: Kim, J.W.
Veröffentlicht: (2016)
Real-Time Substructure Tests and Numerical Simulation of Mechanical Characteristics of Natural Rubber-Laminated Bearings
von: Peng, T.B., et al.
Veröffentlicht: (2018)
von: Peng, T.B., et al.
Veröffentlicht: (2018)
МОДЕРНІЗОВАНА УСТАНОВКА ВУ 700 ДЛЯ НАПИЛЕННЯ ФУНКЦІОНАЛЬНИХ ВАКУУМНИХ ПОКРИТТІВ
von: Клименко, Сергій, et al.
Veröffentlicht: (2025)
von: Клименко, Сергій, et al.
Veröffentlicht: (2025)
Spectroscopic features of raman gain profiles in single-mode fibers based on silica glass
von: I. V. Serdeha, et al.
Veröffentlicht: (2018)
von: I. V. Serdeha, et al.
Veröffentlicht: (2018)
Spectroscopic features of raman gain profiles in single-mode fibers based on silica glass
von: I. V. Serdeha, et al.
Veröffentlicht: (2018)
von: I. V. Serdeha, et al.
Veröffentlicht: (2018)
Formation of the L1Hs retroelement in the intron of the MGMT gene of hominoidea
von: O. V. Pidpala, et al.
Veröffentlicht: (2019)
von: O. V. Pidpala, et al.
Veröffentlicht: (2019)
Fracture Characteristics of B1500HS Steel Hot Blank Parts
von: Hou, H.L., et al.
Veröffentlicht: (2018)
von: Hou, H.L., et al.
Veröffentlicht: (2018)
Fracture Process in ± θ Laminates Subjected to Mode II Loading
von: Ahmed Benyahia, A., et al.
Veröffentlicht: (2002)
von: Ahmed Benyahia, A., et al.
Veröffentlicht: (2002)
Effect of the Microcrack Inclination Angle on Crack Propagation Behavior of TiAl Alloy
von: Feng, R.C., et al.
Veröffentlicht: (2017)
von: Feng, R.C., et al.
Veröffentlicht: (2017)
Evaluating Mechanical Properties of Macro-Synthetic Fiber-Reinforced Concrete with Various Types and Contents
von: Daneshfar, M., et al.
Veröffentlicht: (2017)
von: Daneshfar, M., et al.
Veröffentlicht: (2017)
Surface properties of float glass after various types of heat treatment
von: T. B. Zheplynskyy, et al.
Veröffentlicht: (2014)
von: T. B. Zheplynskyy, et al.
Veröffentlicht: (2014)
Effect of optical losses irregularity on wideband fiber Raman amplification for total telecom window in silica fibers
von: G. S. Felinskyi, et al.
Veröffentlicht: (2013)
von: G. S. Felinskyi, et al.
Veröffentlicht: (2013)
Effect of optical losses irregularity on wideband fiber Raman amplification for total telecom window in silica fibers
von: Felinskyi, G.S., et al.
Veröffentlicht: (2013)
von: Felinskyi, G.S., et al.
Veröffentlicht: (2013)
Zinc ribbon domain containing 1 protein: modulator of multidrug resistance, tumorigenesis and cell cycle
von: Hong, L., et al.
Veröffentlicht: (2006)
von: Hong, L., et al.
Veröffentlicht: (2006)
Mechanical behavior and optimization of multidirectional laminate specimens under delamination by bending
von: Ahmed Benyahia, A., et al.
Veröffentlicht: (2006)
von: Ahmed Benyahia, A., et al.
Veröffentlicht: (2006)
Relationship between HPV16/18 E6 and р53, р21waf1, MDM2, Ki67 and cyclin D1 expression in esophageal squamous cell carcinoma: comparative study by using tissue microarray technology
von: Qi, Z.L., et al.
Veröffentlicht: (2006)
von: Qi, Z.L., et al.
Veröffentlicht: (2006)
Jubilee meeting of the Scientific Council of the H.S. Skovoroda Institute of Philosophy, NAS of Ukraine
von: M. Popovych, et al.
Veröffentlicht: (2016)
von: M. Popovych, et al.
Veröffentlicht: (2016)
Тесные двойные системы в спиральном рукаве Персея. I. HS Персея
von: Закиров, М.М., et al.
Veröffentlicht: (1993)
von: Закиров, М.М., et al.
Veröffentlicht: (1993)
Ähnliche Einträge
-
Experimental and Numerical Analysis of Normal and Lateral High-Velocity Impacts on Carbon Fiber-Reinforced Polymer Laminates
von: Huang, T., et al.
Veröffentlicht: (2016) -
Identification method of structural defects in glass fiber fabric/epoxy resin laminate
von: Naceri, A.
Veröffentlicht: (2009) -
Mechanical Properties of Thermoplastic Variable-Angle Composite Laminations for Conical Shells
von: Han, Z.Y., et al.
Veröffentlicht: (2014) -
Analysis of Fatigue and Crack Growth in Carbon-Fiber Epoxy Matrix Composite Laminates
von: Putic, S., et al.
Veröffentlicht: (2003) -
Stacking Sequence Effect on the Fracture Behavior of Narrow L-Shaped Cross-Ply Laminates: Experimental Study
von: Pan, Z.Y., et al.
Veröffentlicht: (2018)