Creep-Fatigue Behavior Evaluation by Reversible Permeability of CrMo Ferritic Steel for Ultra-Supercritical Steem Power Plants
The creep-fatigue of ferritic CrMo steel has been investigated by measuring the peak interval of the reversible magnetic permeability profile. The peak interval of reversible permeability was discussed in relation to the microstructural evolution during creep-fatigue. The peak interval decreased mon...
Gespeichert in:
| Veröffentlicht in: | Проблемы прочности |
|---|---|
| Datum: | 2016 |
| 1. Verfasser: | Kim, C.S. |
| Format: | Artikel |
| Sprache: | Englisch |
| Veröffentlicht: |
Інститут проблем міцності ім. Г.С. Писаренко НАН України
2016
|
| Schlagworte: | |
| Online Zugang: | https://nasplib.isofts.kiev.ua/handle/123456789/173431 |
| Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
| Назва журналу: | Digital Library of Periodicals of National Academy of Sciences of Ukraine |
| Zitieren: | Creep-Fatigue Behavior Evaluation by Reversible Permeability of CrMo Ferritic Steel for Ultra-Supercritical Steem Power Plants / C.S. Kim // Проблемы прочности. — 2016. — № 1. — С. 182-187. — Бібліогр.: 12 назв. — англ. |
Institution
Digital Library of Periodicals of National Academy of Sciences of UkraineÄhnliche Einträge
Study of Mechanical Degradation of 9Cr-1Mo-V-Nb Steel under Creep-Fatigue Interaction Conditions
von: Kim, C.S.
Veröffentlicht: (2017)
von: Kim, C.S.
Veröffentlicht: (2017)
Static crack growth resistance of 20 and 30CrMo steels in NACE solution
von: M. R. Chuchman
Veröffentlicht: (2016)
von: M. R. Chuchman
Veröffentlicht: (2016)
Determination of the required ratio of the components of charge materials for the smelting of alloy steel 35CrMo
von: K. O. Kostyk, et al.
Veröffentlicht: (2022)
von: K. O. Kostyk, et al.
Veröffentlicht: (2022)
Isothermal Fatigue and Creep-Fatigue Interaction Behavior of Nickel-Base Directionally Solidified Superalloy
von: Haq, A.U., et al.
Veröffentlicht: (2018)
von: Haq, A.U., et al.
Veröffentlicht: (2018)
Ways of TPP Power Units Modernization During Their Conversion to Ultra-Supercritical Steam Parameters
von: A. O. Kostikov, et al.
Veröffentlicht: (2023)
von: A. O. Kostikov, et al.
Veröffentlicht: (2023)
Ways of TPP Power Units Modernization During Their Conversion to Ultra-Supercritical Steam Parameters
von: Костіков, А. О., et al.
Veröffentlicht: (2024)
von: Костіков, А. О., et al.
Veröffentlicht: (2024)
Ways of TPP Power Units Modernization During Their Conversion to Ultra-Supercritical Steam Parameters
von: Костіков, А. О., et al.
Veröffentlicht: (2024)
von: Костіков, А. О., et al.
Veröffentlicht: (2024)
On the mechanism of influence of the grain size of ferrite on the fatigue strength low carbon steel
von: O. N. Perkov, et al.
Veröffentlicht: (2014)
von: O. N. Perkov, et al.
Veröffentlicht: (2014)
Contact fatigue strength of 41CrAlMo7 grade steel by nitriding and shot-peening treatment
von: A. Nakonieczny, et al.
Veröffentlicht: (2012)
von: A. Nakonieczny, et al.
Veröffentlicht: (2012)
Contact fatigue strength of 41CrAlMo7 grade steel by nitriding and shot-peening treatment
von: Nakonieczny, A., et al.
Veröffentlicht: (2012)
von: Nakonieczny, A., et al.
Veröffentlicht: (2012)
Principal Modernization Solutions for a 300 MW Power Unit to be Converted to Operate at Ultra-Supercritical Steam Parameters
von: Костиков, А. О., et al.
Veröffentlicht: (2022)
von: Костиков, А. О., et al.
Veröffentlicht: (2022)
Principal Modernization Solutions for a 300 MW Power Unit to be Converted to Operate at Ultra-Supercritical Steam Parameters
von: Костиков, А. О., et al.
Veröffentlicht: (2022)
von: Костиков, А. О., et al.
Veröffentlicht: (2022)
Principal Modernization Solutions for a 300 MW Power Unit to be Converted to Operate at Ultra-Supercritical Steam Parameters
von: A. O. Kostikov, et al.
Veröffentlicht: (2021)
von: A. O. Kostikov, et al.
Veröffentlicht: (2021)
The influence of hydrogen on the creep-fatigue crack initiation in plates near stress concentrators
von: Ye. Andreikiv, et al.
Veröffentlicht: (2014)
von: Ye. Andreikiv, et al.
Veröffentlicht: (2014)
Determination of period of subcritical creep-fatigue cracks growth under block loading
von: Ye. Andreikiv, et al.
Veröffentlicht: (2015)
von: Ye. Andreikiv, et al.
Veröffentlicht: (2015)
Concept of K-300 Series Steam Turbine Flow Part Modernization for Transition to Operation with Ultra-Supercritical Steam Parameters
von: Русанов, Р. А.
Veröffentlicht: (2026)
von: Русанов, Р. А.
Veröffentlicht: (2026)
Concept of K-300 Series Steam Turbine Flow Part Modernization for Transition to Operation with Ultra-Supercritical Steam Parameters
von: Русанов, Р. А.
Veröffentlicht: (2026)
von: Русанов, Р. А.
Veröffentlicht: (2026)
Effect of ausforming on mechanical properties of 12%Cr ferritic/martensitic steel
von: Kislyak, I.F., et al.
Veröffentlicht: (2022)
von: Kislyak, I.F., et al.
Veröffentlicht: (2022)
Estimation of the periods of creep-fatigue crack initiation and growth in thin-walled structural elements
von: Ye. Andreikiv, et al.
Veröffentlicht: (2011)
von: Ye. Andreikiv, et al.
Veröffentlicht: (2011)
Supercritical deformations
von: Cherepanov, G.P.
Veröffentlicht: (1985)
von: Cherepanov, G.P.
Veröffentlicht: (1985)
Электропроводность плёночного композита NiCoCr—MoS₂
von: Федотов, А.К., et al.
Veröffentlicht: (2011)
von: Федотов, А.К., et al.
Veröffentlicht: (2011)
Theoretical-experimental model for predicting crack growth rate in structural alloys under combined action of fatigue and creep
von: Pokrovskii, V.V., et al.
Veröffentlicht: (2009)
von: Pokrovskii, V.V., et al.
Veröffentlicht: (2009)
Creep Lifetime Assessment of Pressure-Tight PE100 Pipes Based on a Slow Fatigue Crack Growth
von: Luo, W.B., et al.
Veröffentlicht: (2018)
von: Luo, W.B., et al.
Veröffentlicht: (2018)
Electron irradiation, temperature, and stress effect on corrosion of Zr-, Ni-Cr-, and Fe-Cr-based alloys in the vicinity of the water coolant supercritical transition
von: Bakai, O.S., et al.
Veröffentlicht: (2020)
von: Bakai, O.S., et al.
Veröffentlicht: (2020)
Assessment of the Low-Cycle Strain-Induced Martensite Transformation in AISI 316 Stainless Steel by Magnetic and Acoustic Nondestructive Methods
von: Kim, C.S.
Veröffentlicht: (2018)
von: Kim, C.S.
Veröffentlicht: (2018)
Variation of Mechanical Characteristics and Microstructural Evolution in AISI 316 Austenitic Stainless Steel Subjected to Long-Term Thermal Aging at Elevated Temperature
von: Kim, C.S.
Veröffentlicht: (2017)
von: Kim, C.S.
Veröffentlicht: (2017)
Tensoresistivity properties of film materials base on Ni and Mo or Cr
von: I. P. Buryk, et al.
Veröffentlicht: (2009)
von: I. P. Buryk, et al.
Veröffentlicht: (2009)
Radar Range Equation for Ultra Wideband Signals and Ultra Short Pulses
von: Avdeev, V. B.
Veröffentlicht: (2013)
von: Avdeev, V. B.
Veröffentlicht: (2013)
Radar Range Equation for Ultra Wideband Signals and Ultra Short Pulses
von: Avdeev, V.B.
Veröffentlicht: (2002)
von: Avdeev, V.B.
Veröffentlicht: (2002)
Bond Strength Deterioration of Reinforced and Prestressed Concrete Members at Reversed Cyclic Loads
von: Lee, J.-Y., et al.
Veröffentlicht: (2015)
von: Lee, J.-Y., et al.
Veröffentlicht: (2015)
Ultra Exponent Matrices
von: Зеленський, Олексій
Veröffentlicht: (2026)
von: Зеленський, Олексій
Veröffentlicht: (2026)
Electrical conductivity of NiCoCr–MoS2 film composite
von: A. K. Fedotov, et al.
Veröffentlicht: (2011)
von: A. K. Fedotov, et al.
Veröffentlicht: (2011)
Результатыисследования характеристик трещиностойкости стали 12Cr–2Ni–Mo
von: Покровский, В.В., et al.
Veröffentlicht: (2012)
von: Покровский, В.В., et al.
Veröffentlicht: (2012)
Spectroscopy of electric arc discharge plasma with admixtures of W, Mo, Cr
von: Lebid, A.V., et al.
Veröffentlicht: (2016)
von: Lebid, A.V., et al.
Veröffentlicht: (2016)
Chemical synthesis of nanocrystalline Ni-Zn ferrites and their magnetic characteristics
von: Jong-Chul Lee, et al.
Veröffentlicht: (2006)
von: Jong-Chul Lee, et al.
Veröffentlicht: (2006)
Strength Degradation of Glass Fiber Reinforced Polymer Bars Subjected to Reversed Cyclic Load
von: J. Y. Lee, et al.
Veröffentlicht: (2014)
von: J. Y. Lee, et al.
Veröffentlicht: (2014)
Numerical Simulation of Fatigue Damage and Shape Instability Behavior of Steel 40Cr by the Damage-Coupled Crystal Plastic Model
von: Wu, G.C., et al.
Veröffentlicht: (2017)
von: Wu, G.C., et al.
Veröffentlicht: (2017)
FDTD analysis of nonlinear magnetized ferrites: application to modeling of oscillation forming in coaxial line with ferrite
von: Ju. Karelin
Veröffentlicht: (2017)
von: Ju. Karelin
Veröffentlicht: (2017)
Strength Degradation of Glass Fiber Reinforced Polymer Bars Subjected to Reversed Cyclic Load
von: Lee, J.Y., et al.
Veröffentlicht: (2014)
von: Lee, J.Y., et al.
Veröffentlicht: (2014)
Effect of Cyclic Stresses below the Endurance Limit on the Fatigue Life of 40Cr Steel
von: Zhao, L.H., et al.
Veröffentlicht: (2018)
von: Zhao, L.H., et al.
Veröffentlicht: (2018)
Ähnliche Einträge
-
Study of Mechanical Degradation of 9Cr-1Mo-V-Nb Steel under Creep-Fatigue Interaction Conditions
von: Kim, C.S.
Veröffentlicht: (2017) -
Static crack growth resistance of 20 and 30CrMo steels in NACE solution
von: M. R. Chuchman
Veröffentlicht: (2016) -
Determination of the required ratio of the components of charge materials for the smelting of alloy steel 35CrMo
von: K. O. Kostyk, et al.
Veröffentlicht: (2022) -
Isothermal Fatigue and Creep-Fatigue Interaction Behavior of Nickel-Base Directionally Solidified Superalloy
von: Haq, A.U., et al.
Veröffentlicht: (2018) -
Ways of TPP Power Units Modernization During Their Conversion to Ultra-Supercritical Steam Parameters
von: A. O. Kostikov, et al.
Veröffentlicht: (2023)