Buchumschlag

The Sources and Affecting Factors of Creep Threshold Stress of Magnesium Based Composite

Tensile creep experiments were carried on AZ91D magnesium alloy and aluminum silicate short fiber reinforced AZ91D magnesium matrix composite. The creep threshold stress of AZ91D composite depends on the Al atoms solute atmosphere, the bearing and transferring force of short fiber. Threshold stress...

Ausführliche Beschreibung

Gespeichert in:

Bibliographische Detailangaben
Veröffentlicht in:	Проблемы прочности
Datum:	2016
1. Verfasser:	Tian, J.
Format:	Artikel
Sprache:	Englisch
Veröffentlicht:	Інститут проблем міцності ім. Г.С. Писаренко НАН України 2016
Schlagworte:	Научно-технический раздел
Online Zugang:	https://nasplib.isofts.kiev.ua/handle/123456789/173433
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:	Digital Library of Periodicals of National Academy of Sciences of Ukraine
Zitieren:	The Sources and Affecting Factors of Creep Threshold Stress of Magnesium Based Composite / J. Tian // Проблемы прочности. — 2016. — № 1. — С. 197-208. — Бібліогр.: 13 назв. — англ.

Institution

Digital Library of Periodicals of National Academy of Sciences of Ukraine

Ähnliche Einträge

Dynamic Stress Analysis of a Composite Electromagnetic Track
von: Tian, Z.G., et al.
Veröffentlicht: (2018)

Isothermal Fatigue and Creep-Fatigue Interaction Behavior of Nickel-Base Directionally Solidified Superalloy
von: Haq, A.U., et al.
Veröffentlicht: (2018)

Creep-induced structural changes in Ni-Si-B amorphous alloy
von: Jurikova, A., et al.
Veröffentlicht: (2008)

Creep Lifetime Assessment of Pressure-Tight PE100 Pipes Based on a Slow Fatigue Crack Growth
von: Luo, W.B., et al.
Veröffentlicht: (2018)

Constitutive Modeling for Al–Cu–Mg Alloy in Creep Aging Process
von: Yang, Y.L., et al.
Veröffentlicht: (2016)

Compressive creep of Fe3Al-type iron aluminide with Zr additions
von: Dobes, F., et al.
Veröffentlicht: (2008)

Estimation of anisotropy of mechanical properties in Mg alloys by means of compressive creep tests
von: Dobes, F., et al.
Veröffentlicht: (2008)

Constitutive description of creep behavior of Mg-4 Al-1Ca alloy
von: Milicka, K., et al.
Veröffentlicht: (2008)

Near Surface Modification Affected by Hydrogen Interaction: Global Supplemented by Local Approach
von: Katz, Y., et al.
Veröffentlicht: (2008)

Creep Failure Time of Thin-Walled Pipes under Combined Internal Pressure, Bending, and Tension
von: El Megharbel, A.
Veröffentlicht: (2010)

Investigation of Ultrasonic Assisted Friction Stir Spot Welding of Magnesium Alloy to Aluminum Alloy
von: Ji, S.D., et al.
Veröffentlicht: (2016)

Surface Strengthening Behavior of Magnesium Alloy with Laser Thermal Loading under Rapid Cooling
von: Ge, Y.Q., et al.
Veröffentlicht: (2018)

Accelerating Effects of Cyclic Creep Due to the Alternative Load Compared with Constant Load for CD 304L
von: Daei-Sorkhabi, A.H., et al.
Veröffentlicht: (2015)

Experimental evaluation of pulse electric current effect on residual stresses in composite-to-copper joints
von: Stepanov, G.V., et al.
Veröffentlicht: (2008)

Theoretical-experimental model for predicting crack growth rate in structural alloys under combined action of fatigue and creep
von: Pokrovskii, V.V., et al.
Veröffentlicht: (2009)

Evaluating Sensitivity of an AAR-Affected Concrete Arch Dam to the Effects of Structural Joints and Solar Radiation
von: Lamea, M., et al.
Veröffentlicht: (2015)

Analytical Analysis of the Interfacial Stress in Damaged Reinforced Concrete Beams Strengthened by Bonded Composite Plates
von: Hassaine Daouadji, T.
Veröffentlicht: (2013)

Correlation dependences between short-term/long-term static strength characteristics and creep resistance of tungsten at high temperatures
von: Borisenko, V.A., et al.
Veröffentlicht: (2005)

Study of Mechanical Degradation of 9Cr-1Mo-V-Nb Steel under Creep-Fatigue Interaction Conditions
von: Kim, C.S.
Veröffentlicht: (2017)

Corrosion fatigue behavior of extruded AZ80, AZ61, and AM60 magnesium alloys in distilled water
von: Uematsu, Y., et al.
Veröffentlicht: (2008)

Evaluation of Residual Stresses in Carbon/Carbon Composites Components Joined to Copper before and after Pulse Electromagnetic Treatment
von: Stepanov, G.V., et al.
Veröffentlicht: (2011)

FEM Analysis of Stress Distribution in the Hermetic Harmonic Drive Flexspline
von: Pacana, J., et al.
Veröffentlicht: (2017)

Numerical Simulation-Based Optimization of Contact Stress Distribution and Lubrication Conditions in the Straight Worm Drive
von: He, Y., et al.
Veröffentlicht: (2018)

Brittle Mixed-Mode (I+II) Fracture: Application of the Equivalent Notch Stress Intensity Factor to the Cracks Emanating From Notches
von: Minor, H. El, et al.
Veröffentlicht: (2002)

Estimating the Generalized Exponential Distribution Parameters and the Acceleration Factor under Constant-Stress Partially Accelerated Life Testing with Type-II Censoring
von: Ismail, A.A.
Veröffentlicht: (2013)

Fracture Investigation of Wood under Mixed Mode I/II Loading Based on Maximum Shear Stress Criterion
von: Fakoor, M., et al.
Veröffentlicht: (2013)

Experimental Study on the Coaxing Effect of Multi-Level Stresses with Different Sequences
von: Zhao, L.H., et al.
Veröffentlicht: (2017)

Microstructure and Wear Resistance of an Arc-Sprayed Fe-Based Coating after Surface Kemelting Treatment
von: Tian, H.L., et al.
Veröffentlicht: (2014)

Compression Behavior of Biodegradable Thermoplastic Plasticizer-Containing Composites
von: Guo, A.F., et al.
Veröffentlicht: (2019)

Analysis of the Contact Stresses in Curvic Couplings of Gas Turbine in a Blade-Off Event
von: Jiang, X.-J., et al.
Veröffentlicht: (2012)

Microstructure and Mechanical Properties of TiC Nanoparticle-Reinforced Iron-Matrix Composites
von: Kim, J.M., et al.
Veröffentlicht: (2014)

Effect of Cyclic Stresses below the Endurance Limit on the Fatigue Life of 40Cr Steel
von: Zhao, L.H., et al.
Veröffentlicht: (2018)

Fatigue Fracture Analysis of Composite Plates with an Elliptical Hole
von: Kielbasa, B., et al.
Veröffentlicht: (2017)

Experimental Study and Finite Element Analysis of Critical Stresses of Reinforced Thermoplastic Pipes under Various Loads
von: Li, G.H., et al.
Veröffentlicht: (2016)

On the Shear-Deformation Theories for the Analysis of Concrete Shells Reinforced with External Composite Laminates
von: Ferreira, A. J. M.
Veröffentlicht: (2003)

Effect of Grinding Conditions of a TC4 Titanium Alloy on Its Residual Surface Stresses
von: Li, J., et al.
Veröffentlicht: (2015)

Fracture Resistance of Residually-Stressed Ceramic Laminated Structures
von: Gogotsi, G.A., et al.
Veröffentlicht: (2004)

Experimental Investigation on the Tensile Strength of Composite Laminates Containing Open and Filled Holes
von: Fan, X.L., et al.
Veröffentlicht: (2014)

Effect of Impact Load on Dynamic Buckling of Steel Lattice Arch
von: Liu, M.S., et al.
Veröffentlicht: (2017)

Stress Distribution Behavior in Single-Lap Adhesively Bonded Beams
von: He, X., et al.
Veröffentlicht: (2014)