Experimental and Numerical Analysis of Normal and Lateral High-Velocity Impacts on Carbon Fiber-Reinforced Polymer Laminates
This paper examines the effects of normal and lateral high-speed impacts on carbon fiber-reinforced polymer laminates. Experimental tests were conducted at varying velocities (120–200 m/s), and the differing damage modes between normal and lateral impacts were analyzed. Dynamic finite element analys...
Gespeichert in:
| Veröffentlicht in: | Проблемы прочности |
|---|---|
| Datum: | 2016 |
| Hauptverfasser: | Huang, T., Liu, Z.C., Wang, Y.L. |
| Format: | Artikel |
| Sprache: | Englisch |
| Veröffentlicht: |
Інститут проблем міцності ім. Г.С. Писаренко НАН України
2016
|
| Schlagworte: | |
| Online Zugang: | https://nasplib.isofts.kiev.ua/handle/123456789/173434 |
| Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
| Назва журналу: | Digital Library of Periodicals of National Academy of Sciences of Ukraine |
| Zitieren: | Experimental and Numerical Analysis of Normal and Lateral High-Velocity Impacts on Carbon Fiber-Reinforced Polymer Laminates / T. Huang, Z.C. Liu, Y.L. Wang // Проблемы прочности. — 2016. — № 1. — С. 209-220. — Бібліогр.: 28 назв. — англ. |
Institution
Digital Library of Periodicals of National Academy of Sciences of UkraineÄhnliche Einträge
Effect of Carbon Nanotube Embedding on the Mechanical Properties of Delaminated Carbon Fiber Reinforced Polymer Composite Plates
von: Imran, Muhammad
Veröffentlicht: (2026)
von: Imran, Muhammad
Veröffentlicht: (2026)
Effect of Carbon Nanotube Embedding on the Mechanical Properties of Delaminated Carbon Fiber Reinforced Polymer Composite Plates
von: Imran, Muhammad
Veröffentlicht: (2026)
von: Imran, Muhammad
Veröffentlicht: (2026)
Analysis of Fatigue and Crack Growth in Carbon-Fiber Epoxy Matrix Composite Laminates
von: Putic, S., et al.
Veröffentlicht: (2003)
von: Putic, S., et al.
Veröffentlicht: (2003)
Comparative Analysis of Crack Resistance of Fiber Metal Laminates with HS2 Glass/T700 Carbon Layers for Various Stress Ratios
von: Song, X., et al.
Veröffentlicht: (2016)
von: Song, X., et al.
Veröffentlicht: (2016)
Strength Degradation of Glass Fiber Reinforced Polymer Bars Subjected to Reversed Cyclic Load
von: J. Y. Lee, et al.
Veröffentlicht: (2014)
von: J. Y. Lee, et al.
Veröffentlicht: (2014)
Strength Degradation of Glass Fiber Reinforced Polymer Bars Subjected to Reversed Cyclic Load
von: Lee, J.Y., et al.
Veröffentlicht: (2014)
von: Lee, J.Y., et al.
Veröffentlicht: (2014)
Fabrication of laminated metal-intermetallic reinforced composite material
von: I. M. Huriia, et al.
Veröffentlicht: (2019)
von: I. M. Huriia, et al.
Veröffentlicht: (2019)
CT study of products from non-metallic composites reinforced by carbon fibers
von: Levenets, V.V., et al.
Veröffentlicht: (2022)
von: Levenets, V.V., et al.
Veröffentlicht: (2022)
Experimental Analysis of the Influence of Structural Parameters on the Behavior of Glass-Fiber Reinforced Polypropylene Composites
von: Bounouas, L., et al.
Veröffentlicht: (2001)
von: Bounouas, L., et al.
Veröffentlicht: (2001)
Identification method of structural defects in glass fiber fabric/epoxy resin laminate
von: Naceri, A.
Veröffentlicht: (2009)
von: Naceri, A.
Veröffentlicht: (2009)
Numerical Study of Stability Loss of Near-thesurface Short Fibers in a Purely Reinforced Compossite Material
von: V. A. Dekret, et al.
Veröffentlicht: (2021)
von: V. A. Dekret, et al.
Veröffentlicht: (2021)
Effect of the Surface Texture on Laser Joining of a Carbon Fiber-Reinforced Thermosetting Plastic and Stainless Steel
von: Sheng, L.Y., et al.
Veröffentlicht: (2019)
von: Sheng, L.Y., et al.
Veröffentlicht: (2019)
On the Shear-Deformation Theories for the Analysis of Concrete Shells Reinforced with External Composite Laminates
von: Ferreira, A. J. M.
Veröffentlicht: (2003)
von: Ferreira, A. J. M.
Veröffentlicht: (2003)
On the influence of inhibitors on the resistance of polymer anticorrosion coatings to cathode lamination
von: I. P. Hnyp, et al.
Veröffentlicht: (2011)
von: I. P. Hnyp, et al.
Veröffentlicht: (2011)
Research of structure and properties polytetrafluoroethylene reinforced fiber arselon
von: A. I. Burja, et al.
Veröffentlicht: (2017)
von: A. I. Burja, et al.
Veröffentlicht: (2017)
Prediction of fiber-reinforced concrete strength under compression
von: V. P. Sylovaniuk, et al.
Veröffentlicht: (2016)
von: V. P. Sylovaniuk, et al.
Veröffentlicht: (2016)
Mechanical Properties and Machinability of Glass Fiber-Reinforced Polyetheretherketone
von: Ji, S.J., et al.
Veröffentlicht: (2015)
von: Ji, S.J., et al.
Veröffentlicht: (2015)
Assessment of the Microstructure and Mechanical Properties of a Laser-Joined Carbon Fiber-Reinforced Thermosetting Plastic and Stainless Steel
von: Sheng, L.Y., et al.
Veröffentlicht: (2018)
von: Sheng, L.Y., et al.
Veröffentlicht: (2018)
System of ultrasonic non-destructive testing of carbon fiber composite defects
von: Xuerui Wang, et al.
Veröffentlicht: (2018)
von: Xuerui Wang, et al.
Veröffentlicht: (2018)
Flexural Fatigue Behavior of Cross-Ply Laminates: An Experimental Approach
von: Bezazi, A.R., et al.
Veröffentlicht: (2003)
von: Bezazi, A.R., et al.
Veröffentlicht: (2003)
Identification of fracture mechanisms of cement mortar reinforced with basalt and polypropylene fibers
von: V. R. Skalskyi, et al.
Veröffentlicht: (2020)
von: V. R. Skalskyi, et al.
Veröffentlicht: (2020)
An Experimental Study of the Dynamic Split Tension Properties of Reinforced Concrete
von: Zhao, Z., et al.
Veröffentlicht: (2016)
von: Zhao, Z., et al.
Veröffentlicht: (2016)
Reinforcement of epoxy polymers with hydride-silylated fumed silica
von: P. O. Kuzema, et al.
Veröffentlicht: (2020)
von: P. O. Kuzema, et al.
Veröffentlicht: (2020)
Methods of strength and life time evaluation of fiber reinforced concretes (A review)
von: Ye. Andreikiv, et al.
Veröffentlicht: (2018)
von: Ye. Andreikiv, et al.
Veröffentlicht: (2018)
Investigation of thermal stability organic plastics based of polysulfonamide reinforced by fiber Kevlar
von: A. I. Burja, et al.
Veröffentlicht: (2015)
von: A. I. Burja, et al.
Veröffentlicht: (2015)
Study on the Compression Moulding of Intercrossed Pre-Preg Glass FiberReinforced Plastic
von: Kim, J.W.
Veröffentlicht: (2016)
von: Kim, J.W.
Veröffentlicht: (2016)
Improvement of Strength and Radiation Protection Properties of Biodegradable Jute Fiber Reinforced Material
von: Verma, S., et al.
Veröffentlicht: (2017)
von: Verma, S., et al.
Veröffentlicht: (2017)
Experimental Investigation on the Tensile Strength of Composite Laminates Containing Open and Filled Holes
von: X. L. Fan, et al.
Veröffentlicht: (2014)
von: X. L. Fan, et al.
Veröffentlicht: (2014)
Experimental Investigation on the Tensile Strength of Composite Laminates Containing Open and Filled Holes
von: Fan, X.L., et al.
Veröffentlicht: (2014)
von: Fan, X.L., et al.
Veröffentlicht: (2014)
The two-component model of the structure and elastic deformation of polymer fibers
von: L. A. Bulavin, et al.
Veröffentlicht: (2012)
von: L. A. Bulavin, et al.
Veröffentlicht: (2012)
On the electromagnetic shielding properties of carbon fiber materials
von: Rosu, G., et al.
Veröffentlicht: (2022)
von: Rosu, G., et al.
Veröffentlicht: (2022)
Evaluating Mechanical Properties of Macro-Synthetic Fiber-Reinforced Concrete with Various Types and Contents
von: Daneshfar, M., et al.
Veröffentlicht: (2017)
von: Daneshfar, M., et al.
Veröffentlicht: (2017)
Iodine sorption capacity of carbon fiber cloth materials and granular activated carbons
von: Gurin, I.V., et al.
Veröffentlicht: (2022)
von: Gurin, I.V., et al.
Veröffentlicht: (2022)
Experimental research on mechanical properties of desert sand steel-PVA fiber engineered cementitious composites
von: Che Jialing, et al.
Veröffentlicht: (2017)
von: Che Jialing, et al.
Veröffentlicht: (2017)
Numerical Simulation and Experimental Study on the Interface Bonding of Stainless Steel Clad Plate
von: Jin, H.R., et al.
Veröffentlicht: (2018)
von: Jin, H.R., et al.
Veröffentlicht: (2018)
Real-Time Substructure Tests and Numerical Simulation of Mechanical Characteristics of Natural Rubber-Laminated Bearings
von: Peng, T.B., et al.
Veröffentlicht: (2018)
von: Peng, T.B., et al.
Veröffentlicht: (2018)
Fabrication and characterization of palm sugar tree (Arenga pinnata) fiber composites reinforced by polyester resin
von: Timbangen Sembiring, et al.
Veröffentlicht: (2019)
von: Timbangen Sembiring, et al.
Veröffentlicht: (2019)
Investigation of planar quantum functional polymer nanolayers structures on rolybenzimidazole fiber nanosheets
von: O. V. Balaban, et al.
Veröffentlicht: (2017)
von: O. V. Balaban, et al.
Veröffentlicht: (2017)
Improving efficiency of finishing natural stone using diamond–polymer fiber tools
von: V. D. Kurilovych, et al.
Veröffentlicht: (2014)
von: V. D. Kurilovych, et al.
Veröffentlicht: (2014)
Bromination and functionalization of the carbon fibers surface with sulfur containing groups
von: L. M. Hrishchenko, et al.
Veröffentlicht: (2013)
von: L. M. Hrishchenko, et al.
Veröffentlicht: (2013)
Ähnliche Einträge
-
Effect of Carbon Nanotube Embedding on the Mechanical Properties of Delaminated Carbon Fiber Reinforced Polymer Composite Plates
von: Imran, Muhammad
Veröffentlicht: (2026) -
Effect of Carbon Nanotube Embedding on the Mechanical Properties of Delaminated Carbon Fiber Reinforced Polymer Composite Plates
von: Imran, Muhammad
Veröffentlicht: (2026) -
Analysis of Fatigue and Crack Growth in Carbon-Fiber Epoxy Matrix Composite Laminates
von: Putic, S., et al.
Veröffentlicht: (2003) -
Comparative Analysis of Crack Resistance of Fiber Metal Laminates with HS2 Glass/T700 Carbon Layers for Various Stress Ratios
von: Song, X., et al.
Veröffentlicht: (2016) -
Strength Degradation of Glass Fiber Reinforced Polymer Bars Subjected to Reversed Cyclic Load
von: J. Y. Lee, et al.
Veröffentlicht: (2014)