Application of Taguchi Approach to Optimize Laser-Arc Hybrid Welding Parameters of Galvanized Steel
This study aims to establish the weld quality of the Nd:YAG laser-MIG hybrid welding on galvanized steel (SGACC60). In order to do so, the Taguchi analysis optimized the laser-arc hybrid welding process for SGACC60 by varying four parameters: welding speed, welding current, laser-arc distance and sh...
Збережено в:
| Опубліковано в: : | Проблемы прочности |
|---|---|
| Дата: | 2016 |
| Автори: | , , , , , |
| Формат: | Стаття |
| Мова: | Англійська |
| Опубліковано: |
Інститут проблем міцності ім. Г.С. Писаренко НАН України
2016
|
| Теми: | |
| Онлайн доступ: | https://nasplib.isofts.kiev.ua/handle/123456789/173435 |
| Теги: |
Додати тег
Немає тегів, Будьте першим, хто поставить тег для цього запису!
|
| Назва журналу: | Digital Library of Periodicals of National Academy of Sciences of Ukraine |
| Цитувати: | Application of Taguchi Approach to Optimize Laser-Arc Hybrid Welding Parameters of Galvanized Steel / HanSur Bang, HeeSeon Bang, M.-J. Na, G.-H. Jeon, G.-S. Kim, B.-R. Kim // Проблемы прочности. — 2016. — № 1. — С. 166-172. — Бібліогр.: 17 назв. — англ. |
Репозитарії
Digital Library of Periodicals of National Academy of Sciences of Ukraine| _version_ | 1862646106741014528 |
|---|---|
| author | Bang, HanSur Bang, HeeSeon Na, M.-J. Jeon, G.-H. Kim, G.-S. Kim, B.-R. |
| author_facet | Bang, HanSur Bang, HeeSeon Na, M.-J. Jeon, G.-H. Kim, G.-S. Kim, B.-R. |
| citation_txt | Application of Taguchi Approach to Optimize Laser-Arc Hybrid Welding Parameters of Galvanized Steel / HanSur Bang, HeeSeon Bang, M.-J. Na, G.-H. Jeon, G.-S. Kim, B.-R. Kim // Проблемы прочности. — 2016. — № 1. — С. 166-172. — Бібліогр.: 17 назв. — англ. |
| collection | DSpace DC |
| container_title | Проблемы прочности |
| description | This study aims to establish the weld quality of the Nd:YAG laser-MIG hybrid welding on galvanized steel (SGACC60). In order to do so, the Taguchi analysis optimized the laser-arc hybrid welding process for SGACC60 by varying four parameters: welding speed, welding current, laser-arc distance and shielding gas. The experiment produced 18 combinations of these four essential welding parameters, which were estimated in terms of ultimate tensile strength, welding depth and width ratio, and hardness. The optimum result exhibited that the tensile strength of welds was approximately 101% of that of the base metal, and that their hardness was within the acceptable range (the maximum value 350 Hv).
|
| first_indexed | 2025-12-01T11:10:13Z |
| format | Article |
| fulltext | |
| id | nasplib_isofts_kiev_ua-123456789-173435 |
| institution | Digital Library of Periodicals of National Academy of Sciences of Ukraine |
| issn | 0556-171X |
| language | English |
| last_indexed | 2025-12-01T11:10:13Z |
| publishDate | 2016 |
| publisher | Інститут проблем міцності ім. Г.С. Писаренко НАН України |
| record_format | dspace |
| spelling | Bang, HanSur Bang, HeeSeon Na, M.-J. Jeon, G.-H. Kim, G.-S. Kim, B.-R. 2020-12-03T21:32:59Z 2020-12-03T21:32:59Z 2016 Application of Taguchi Approach to Optimize Laser-Arc Hybrid Welding Parameters of Galvanized Steel / HanSur Bang, HeeSeon Bang, M.-J. Na, G.-H. Jeon, G.-S. Kim, B.-R. Kim // Проблемы прочности. — 2016. — № 1. — С. 166-172. — Бібліогр.: 17 назв. — англ. 0556-171X https://nasplib.isofts.kiev.ua/handle/123456789/173435 539.4 This study aims to establish the weld quality of the Nd:YAG laser-MIG hybrid welding on galvanized steel (SGACC60). In order to do so, the Taguchi analysis optimized the laser-arc hybrid welding process for SGACC60 by varying four parameters: welding speed, welding current, laser-arc distance and shielding gas. The experiment produced 18 combinations of these four essential welding parameters, which were estimated in terms of ultimate tensile strength, welding depth and width ratio, and hardness. The optimum result exhibited that the tensile strength of welds was approximately 101% of that of the base metal, and that their hardness was within the acceptable range (the maximum value 350 Hv). This study was supported by research fund from Chosun University, 2013. en Інститут проблем міцності ім. Г.С. Писаренко НАН України Проблемы прочности Научно-технический раздел Application of Taguchi Approach to Optimize Laser-Arc Hybrid Welding Parameters of Galvanized Steel Применение подхода Тагучи для оптимизации параметров гибридной лазерно-дуговой сварки оцинкованной стали Article published earlier |
| spellingShingle | Application of Taguchi Approach to Optimize Laser-Arc Hybrid Welding Parameters of Galvanized Steel Bang, HanSur Bang, HeeSeon Na, M.-J. Jeon, G.-H. Kim, G.-S. Kim, B.-R. Научно-технический раздел |
| title | Application of Taguchi Approach to Optimize Laser-Arc Hybrid Welding Parameters of Galvanized Steel |
| title_alt | Применение подхода Тагучи для оптимизации параметров гибридной лазерно-дуговой сварки оцинкованной стали |
| title_full | Application of Taguchi Approach to Optimize Laser-Arc Hybrid Welding Parameters of Galvanized Steel |
| title_fullStr | Application of Taguchi Approach to Optimize Laser-Arc Hybrid Welding Parameters of Galvanized Steel |
| title_full_unstemmed | Application of Taguchi Approach to Optimize Laser-Arc Hybrid Welding Parameters of Galvanized Steel |
| title_short | Application of Taguchi Approach to Optimize Laser-Arc Hybrid Welding Parameters of Galvanized Steel |
| title_sort | application of taguchi approach to optimize laser-arc hybrid welding parameters of galvanized steel |
| topic | Научно-технический раздел |
| topic_facet | Научно-технический раздел |
| url | https://nasplib.isofts.kiev.ua/handle/123456789/173435 |
| work_keys_str_mv | AT banghansur applicationoftaguchiapproachtooptimizelaserarchybridweldingparametersofgalvanizedsteel AT bangheeseon applicationoftaguchiapproachtooptimizelaserarchybridweldingparametersofgalvanizedsteel AT namj applicationoftaguchiapproachtooptimizelaserarchybridweldingparametersofgalvanizedsteel AT jeongh applicationoftaguchiapproachtooptimizelaserarchybridweldingparametersofgalvanizedsteel AT kimgs applicationoftaguchiapproachtooptimizelaserarchybridweldingparametersofgalvanizedsteel AT kimbr applicationoftaguchiapproachtooptimizelaserarchybridweldingparametersofgalvanizedsteel AT banghansur primeneniepodhodatagučidlâoptimizaciiparametrovgibridnoilazernodugovoisvarkiocinkovannoistali AT bangheeseon primeneniepodhodatagučidlâoptimizaciiparametrovgibridnoilazernodugovoisvarkiocinkovannoistali AT namj primeneniepodhodatagučidlâoptimizaciiparametrovgibridnoilazernodugovoisvarkiocinkovannoistali AT jeongh primeneniepodhodatagučidlâoptimizaciiparametrovgibridnoilazernodugovoisvarkiocinkovannoistali AT kimgs primeneniepodhodatagučidlâoptimizaciiparametrovgibridnoilazernodugovoisvarkiocinkovannoistali AT kimbr primeneniepodhodatagučidlâoptimizaciiparametrovgibridnoilazernodugovoisvarkiocinkovannoistali |