Tensile Fracture Analysis of Key-Hole Notches by Means of the Strain Energy Density
Получены новые экспериментальные данные о хрупком разрушении по механизму отрыва в концентраторах напряжения типа замочной скважины и проверена возможность их прогнозирования с помощью критерия плотности локальной энергии деформации. Выполнено 21 испытание на разрушение образцов из полиметилметакрил...
Saved in:
| Published in: | Проблемы прочности |
|---|---|
| Date: | 2016 |
| Main Authors: | Torabi, A.R., Campagnolo, A., Berto, F. |
| Format: | Article |
| Language: | English |
| Published: |
Інститут проблем міцності ім. Г.С. Писаренко НАН України
2016
|
| Subjects: | |
| Online Access: | https://nasplib.isofts.kiev.ua/handle/123456789/173457 |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Journal Title: | Digital Library of Periodicals of National Academy of Sciences of Ukraine |
| Cite this: | Tensile Fracture Analysis of Key-Hole Notches by Means of the Strain Energy Density / A.R. Torabi, A. Campagnolo F. Berto // Проблемы прочности. — 2016. — № 2. — С. 80-92. — Бібліогр.: 50 назв. — англ. |
Institution
Digital Library of Periodicals of National Academy of Sciences of UkraineSimilar Items
Fracture Assessment of Blunt V-Notched Graphite Specimens by Means of the Strain Energy Density
by: Torabi, A.R., et al.
Published: (2013)
by: Torabi, A.R., et al.
Published: (2013)
Large-Scale Yielding Failure Prediction of Notched Ductile Plates by Means of the Linear Elastic Notch Fracture Mechanics
by: Torabi, A.R., et al.
Published: (2017)
by: Torabi, A.R., et al.
Published: (2017)
Fracture Assessment of Blunt V-Notched Graphite Specimens by Means of the Strain Energy Density
by: A. R. Torabi, et al.
Published: (2013)
by: A. R. Torabi, et al.
Published: (2013)
Numerical analysis of strain and stress state in cylindrical notched tensile specimens
by: L. Derpenski, et al.
Published: (2013)
by: L. Derpenski, et al.
Published: (2013)
Numerical analysis of strain and stress state in cylindrical notched tensile specimens
by: Derpenski, L., et al.
Published: (2013)
by: Derpenski, L., et al.
Published: (2013)
Effect of the Loading Rate on the Brittle Fracture of Terfenol-D Specimens in Magnetic Field: Strain Energy Density Approach
by: Colussi, M., et al.
Published: (2016)
by: Colussi, M., et al.
Published: (2016)
Brittle Failure of Graphite Weakened by V-Notches: A Review of Some Recent Results under Different Loading Modes
by: Berto, F., et al.
Published: (2015)
by: Berto, F., et al.
Published: (2015)
Quantification of the Influence of Residual Stresses on Fatigue Strength of Al-Alloy Welded Joints by Means of the Local Strain Energy Density Approach
by: Ferro, P., et al.
Published: (2016)
by: Ferro, P., et al.
Published: (2016)
Fracture Criterion for the Tensile Test of 7075 Aluminum Alloy
by: Chen, D.C., et al.
Published: (2015)
by: Chen, D.C., et al.
Published: (2015)
Brittle Mixed-Mode (I+II) Fracture: Application of the Equivalent Notch Stress Intensity Factor to the Cracks Emanating From Notches
by: Minor, H. El, et al.
Published: (2002)
by: Minor, H. El, et al.
Published: (2002)
Experimental Investigation on the Tensile Strength of Composite Laminates Containing Open and Filled Holes
by: Fan, X.L., et al.
Published: (2014)
by: Fan, X.L., et al.
Published: (2014)
Probabilistic Fatigue Crack Initiation and Propagation Fields Using the Strain Energy Density
by: Correia, J.A.F.O., et al.
Published: (2018)
by: Correia, J.A.F.O., et al.
Published: (2018)
Fatigue Fracture Analysis of Composite Plates with an Elliptical Hole
by: Kielbasa, B., et al.
Published: (2017)
by: Kielbasa, B., et al.
Published: (2017)
Effects of Geometrical Parameters on the Stress Field of Three-Dimensional Plates Weakened by Periodic Notches
by: Amini, A., et al.
Published: (2014)
by: Amini, A., et al.
Published: (2014)
Notch Effect on the Fatigue Behavior of a Hot Dip Galvanized Structural Steel
by: Berto, F., et al.
Published: (2015)
by: Berto, F., et al.
Published: (2015)
Influence of H₂S Corrosion on Tensile Properties and Fracture Toughness of X80 Pipeline Steel
by: Gu, L., et al.
Published: (2019)
by: Gu, L., et al.
Published: (2019)
Numerical simulation of stress-strain state near crack tip in a compact tensile specimen
by: Kotlyarenko, A.A., et al.
Published: (2009)
by: Kotlyarenko, A.A., et al.
Published: (2009)
Hydrogen effect on local fracture emanating from notches in pipeline from steel API X52
by: Capelle, J., et al.
Published: (2009)
by: Capelle, J., et al.
Published: (2009)
Fatigue Assessment of Ti–6Al–4V Circular Notched Specimens Produced by Selective Laser Melting
by: Razavi, S.M.J., et al.
Published: (2017)
by: Razavi, S.M.J., et al.
Published: (2017)
Three-Dimensional Finite Element Analysis of Tensile-Shear Spot-Welded Joints in Tensile and Compressive Loading Conditions
by: Adib, H., et al.
Published: (2004)
by: Adib, H., et al.
Published: (2004)
Stress concentration near curvilinear holes and notches with unsmoothed contours
by: M. P. Savruk
Published: (2021)
by: M. P. Savruk
Published: (2021)
Plastic zones development at fractures threshold at tip of square notch
by: V. Kryven, et al.
Published: (2015)
by: V. Kryven, et al.
Published: (2015)
Inclined Hole under Different Loading Conditions: A Review of Recent Results
by: Berto, F., et al.
Published: (2016)
by: Berto, F., et al.
Published: (2016)
The Effect of Notch Tip Position on the Charpy Impact Energy for Bainitic and Martensitic Functionally Graded Steel
by: Eskandari Jam, J., et al.
Published: (2014)
by: Eskandari Jam, J., et al.
Published: (2014)
Experimental Investigation on the Tensile Strength of Composite Laminates Containing Open and Filled Holes
by: X. L. Fan, et al.
Published: (2014)
by: X. L. Fan, et al.
Published: (2014)
Stress concentration at an elliptic hole or a parabolic notch in a quasi-orthotropic plane
by: A. Kazberuk, et al.
Published: (2016)
by: A. Kazberuk, et al.
Published: (2016)
Tensile Deformation and Fracture of α+β-Titanium Alloys Synthesized by Powder Metallurgy
by: A. I. Dekhtjar, et al.
Published: (2013)
by: A. I. Dekhtjar, et al.
Published: (2013)
Tensile strength of the brittle materials, probabilistic or deterministic approach?
by: Jeong, J., et al.
Published: (2006)
by: Jeong, J., et al.
Published: (2006)
Mechanical Behavior and Failure of Riveting Joints in Tensile and Shear Tests
by: Mucha, J., et al.
Published: (2015)
by: Mucha, J., et al.
Published: (2015)
Study of Characteristic Equation of the Elastic Stress Field near Bimaterial Notche
by: Arabi, H., et al.
Published: (2013)
by: Arabi, H., et al.
Published: (2013)
Effects of Geometrical Parameters on the Stress Field of Three-Dimensional Plates Weakened by Periodic Notches
by: A. Amini, et al.
Published: (2014)
by: A. Amini, et al.
Published: (2014)
The Ultimate Tensile Strength of Coach Peel Self-Piercing Riveting Joints
by: He, X., et al.
Published: (2013)
by: He, X., et al.
Published: (2013)
Fatigue lifetime of ADI from ultimate tensile strength to permanent fatigue limit
by: Zapletal, J., et al.
Published: (2008)
by: Zapletal, J., et al.
Published: (2008)
Isothermal Crystallization Kinetics Effect on the Tensile Properties of PLA/PTT Polymer Composites
by: Tsou, C.-Y., et al.
Published: (2017)
by: Tsou, C.-Y., et al.
Published: (2017)
Stress distribution at the contour of a rounded V-shaped notch under antiplane strain
by: M. P. Savruk, et al.
Published: (2011)
by: M. P. Savruk, et al.
Published: (2011)
Modeling and Analysis of the Tensile and Flexural Properties of a FiberOrientated Hybrid Nanocomposite Using Taguchi Methodology
by: Rostamiyan, Y.
Published: (2015)
by: Rostamiyan, Y.
Published: (2015)
Fracture resistance of ceramics: edge fracture method
by: Gogotsi, G.A., et al.
Published: (2005)
by: Gogotsi, G.A., et al.
Published: (2005)
Tensile properties of a Fe-32Mn-6Si shape memory alloy
by: Bouraoui, T., et al.
Published: (2008)
by: Bouraoui, T., et al.
Published: (2008)
Experimental-Numerical Study of Tensile Strength of the High-Strength Steel S690QL at Elevated Temperatures
by: Arsić, D., et al.
Published: (2016)
by: Arsić, D., et al.
Published: (2016)
Stress distribution near rounded V-notches in an orthotropic elastic plane under antiplane strain
by: M. P. Savruk, et al.
Published: (2019)
by: M. P. Savruk, et al.
Published: (2019)
Similar Items
-
Fracture Assessment of Blunt V-Notched Graphite Specimens by Means of the Strain Energy Density
by: Torabi, A.R., et al.
Published: (2013) -
Large-Scale Yielding Failure Prediction of Notched Ductile Plates by Means of the Linear Elastic Notch Fracture Mechanics
by: Torabi, A.R., et al.
Published: (2017) -
Fracture Assessment of Blunt V-Notched Graphite Specimens by Means of the Strain Energy Density
by: A. R. Torabi, et al.
Published: (2013) -
Numerical analysis of strain and stress state in cylindrical notched tensile specimens
by: L. Derpenski, et al.
Published: (2013) -
Numerical analysis of strain and stress state in cylindrical notched tensile specimens
by: Derpenski, L., et al.
Published: (2013)