Modal Analysis of the Turbine Blade at Complex Thermomechanical Loads
The results of modal analysis of the turbine blade were presented. The turbine blade during the operation of the engine is subjected to complex thermomechanical loads induced by centrifugal forces of the rotating blade and a nonuniform thermal field. These loads have a great influence on the natural...
Gespeichert in:
| Veröffentlicht in: | Проблемы прочности |
|---|---|
| Datum: | 2016 |
| Hauptverfasser: | Witek, L., Stachowicz, F. |
| Format: | Artikel |
| Sprache: | Englisch |
| Veröffentlicht: |
Інститут проблем міцності ім. Г.С. Писаренко НАН України
2016
|
| Schlagworte: | |
| Online Zugang: | https://nasplib.isofts.kiev.ua/handle/123456789/173501 |
| Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
| Назва журналу: | Digital Library of Periodicals of National Academy of Sciences of Ukraine |
| Zitieren: | Modal Analysis of the Turbine Blade at Complex Thermomechanical Loads / L. Witek, F. Stachowicz // Проблемы прочности. — 2016. — № 4. — С. 6-13. — Бібліогр.: 21 назв. — англ. |
Institution
Digital Library of Periodicals of National Academy of Sciences of UkraineÄhnliche Einträge
Linear Micropolar Elasticity Analysis of Stresses in Bones under Static Loads
von: Eremeyev, V.A., et al.
Veröffentlicht: (2017)
von: Eremeyev, V.A., et al.
Veröffentlicht: (2017)
Analysis of the Contact Stresses in Curvic Couplings of Gas Turbine in a Blade-Off Event
von: Jiang, X.-J., et al.
Veröffentlicht: (2012)
von: Jiang, X.-J., et al.
Veröffentlicht: (2012)
Thermomechanical Response of LNG Concrete Tank to Cryogenic Temperatures
von: Dahmani, L.
Veröffentlicht: (2011)
von: Dahmani, L.
Veröffentlicht: (2011)
Numerical Simulation of the Thermomechanical Behavior of a Hot Stamping Die
von: Jiang, Q.Y., et al.
Veröffentlicht: (2018)
von: Jiang, Q.Y., et al.
Veröffentlicht: (2018)
Elastoplastic Model of Sand under Complex Loading
von: Wan, Z., et al.
Veröffentlicht: (2018)
von: Wan, Z., et al.
Veröffentlicht: (2018)
Thermomechanical Coupling Model for a Stainless Steel-Clad Plate on Heat Treatment
von: Guan, B., et al.
Veröffentlicht: (2019)
von: Guan, B., et al.
Veröffentlicht: (2019)
The limit load calculations for pipelines with axial complex-shaped defects
von: Bogdan, A.V., et al.
Veröffentlicht: (2009)
von: Bogdan, A.V., et al.
Veröffentlicht: (2009)
Vibrations of a Complex Systems with Damping under Dynamic Loading
von: Cabanska-Placzkiewicz, K.
Veröffentlicht: (2002)
von: Cabanska-Placzkiewicz, K.
Veröffentlicht: (2002)
Failure Analysis of a Heavy Duty Gas Turbine Blad
von: Asadikouhanjan, i S., et al.
Veröffentlicht: (2014)
von: Asadikouhanjan, i S., et al.
Veröffentlicht: (2014)
Effect of Grinding Parameters on the Surface Quality of Cutting Tools Made of High-Speed Low-Alloy Steels
von: Jaworski, J., et al.
Veröffentlicht: (2016)
von: Jaworski, J., et al.
Veröffentlicht: (2016)
Discrepancy Analysis of Load–Displacement in the Combination Space for Concrete Box Girder Assessment
von: Ye, X.F., et al.
Veröffentlicht: (2018)
von: Ye, X.F., et al.
Veröffentlicht: (2018)
FEM Analysis of Clinching Tool Load in a Joint of Dual-Phase Steels
von: Kaščák, L., et al.
Veröffentlicht: (2016)
von: Kaščák, L., et al.
Veröffentlicht: (2016)
Analysis of Viscoelastoplastic Behavior of Expanded Polystyrene under Compressive Loading: Experiments and Modeling
von: Imad, A., et al.
Veröffentlicht: (2001)
von: Imad, A., et al.
Veröffentlicht: (2001)
Accelerating Effects of Cyclic Creep Due to the Alternative Load Compared with Constant Load for CD 304L
von: Daei-Sorkhabi, A.H., et al.
Veröffentlicht: (2015)
von: Daei-Sorkhabi, A.H., et al.
Veröffentlicht: (2015)
Experimental Study and Finite Element Analysis of Critical Stresses of Reinforced Thermoplastic Pipes under Various Loads
von: Li, G.H., et al.
Veröffentlicht: (2016)
von: Li, G.H., et al.
Veröffentlicht: (2016)
Experimental Study of Concrete Subjected to Explosive Loading
von: Rekucki, R., et al.
Veröffentlicht: (2002)
von: Rekucki, R., et al.
Veröffentlicht: (2002)
Three-Dimensional Finite Element Analysis of Tensile-Shear Spot-Welded Joints in Tensile and Compressive Loading Conditions
von: Adib, H., et al.
Veröffentlicht: (2004)
von: Adib, H., et al.
Veröffentlicht: (2004)
Registration and assessment of load cycles in pipelines
von: Torop, O., et al.
Veröffentlicht: (2009)
von: Torop, O., et al.
Veröffentlicht: (2009)
Response of an Indented Square Tube under Impact Loading
von: Tan, Z.H., et al.
Veröffentlicht: (2015)
von: Tan, Z.H., et al.
Veröffentlicht: (2015)
Lateral Torsional Buckling of an Eccentrically Loaded Channel Section Beam
von: Dahmani, L., et al.
Veröffentlicht: (2015)
von: Dahmani, L., et al.
Veröffentlicht: (2015)
Fracture of Polymethylmethacrylate under Pulse Loading Conditions
von: Atroshenko, S.A., et al.
Veröffentlicht: (2002)
von: Atroshenko, S.A., et al.
Veröffentlicht: (2002)
Radiation-Induced Embrittlement of WWER-440 Reactor Pressure Vessel Steel under Loading
von: Grinik, E.U., et al.
Veröffentlicht: (2003)
von: Grinik, E.U., et al.
Veröffentlicht: (2003)
Fracture Process in ± θ Laminates Subjected to Mode II Loading
von: Ahmed Benyahia, A., et al.
Veröffentlicht: (2002)
von: Ahmed Benyahia, A., et al.
Veröffentlicht: (2002)
Simulation of the Mechanical Characteristics of a Granular Matter Tested under Biaxial Loading
von: Bi, Z.W., et al.
Veröffentlicht: (2015)
von: Bi, Z.W., et al.
Veröffentlicht: (2015)
Cyclic cracking resistance of brittle materials in compressive loading
von: Lanin, A.G.
Veröffentlicht: (2009)
von: Lanin, A.G.
Veröffentlicht: (2009)
Lateral Torsional Buckling Response of Steel Beam with Different Boundary Conditions and Loading
von: Dahmani, L., et al.
Veröffentlicht: (2014)
von: Dahmani, L., et al.
Veröffentlicht: (2014)
Compressive Properties of SiC Particle-Reinforced Aluminum Matrix Composites under Repeated Impact Loading
von: Cao, D.F., et al.
Veröffentlicht: (2015)
von: Cao, D.F., et al.
Veröffentlicht: (2015)
Static and Dynamic Buckling of Rectangular Functionally Graded Plates Subjected to Thermal Loading
von: Czechowski, L., et al.
Veröffentlicht: (2013)
von: Czechowski, L., et al.
Veröffentlicht: (2013)
Elastoplastic Damage Model for Concrete under Triaxial Compression and Reversed Cyclic Loading
von: Zhang, J., et al.
Veröffentlicht: (2018)
von: Zhang, J., et al.
Veröffentlicht: (2018)
Residual Strains of Filter Materials Reinforced with Grid Inclusions under Cyclic Loading
von: Lin, Y.L., et al.
Veröffentlicht: (2015)
von: Lin, Y.L., et al.
Veröffentlicht: (2015)
Effect of Impact Load on Dynamic Buckling of Steel Lattice Arch
von: Liu, M.S., et al.
Veröffentlicht: (2017)
von: Liu, M.S., et al.
Veröffentlicht: (2017)
Investigation of Fracture of Spheroplastics under Static and Dynamic Loading Conditions
von: Atroshenko, S.A., et al.
Veröffentlicht: (2002)
von: Atroshenko, S.A., et al.
Veröffentlicht: (2002)
Numerical Simulation of the Inlet/Outlet Pressure Ratio Effect on the Heat Transfer Coefficient in an Air Turbine Cascade
von: He, Z., et al.
Veröffentlicht: (2019)
von: He, Z., et al.
Veröffentlicht: (2019)
Deformation and fracture of high-temperature steels at different temperatures and loading rates
von: Kondryakov, E.A., et al.
Veröffentlicht: (2009)
von: Kondryakov, E.A., et al.
Veröffentlicht: (2009)
Dynamic Response of Pavement Plates to the Positive and Negative Phases of the Friedlander Load
von: Alisjahbana, S.W., et al.
Veröffentlicht: (2018)
von: Alisjahbana, S.W., et al.
Veröffentlicht: (2018)
Evolution of discrete phenomena of inelasticity in aluminum alloy under cyclic loading
von: Pisarenko, G.G., et al.
Veröffentlicht: (2009)
von: Pisarenko, G.G., et al.
Veröffentlicht: (2009)
Service loading test as a source for the fatigue curve parameters’ estimation
von: Gadolina, I.V., et al.
Veröffentlicht: (2009)
von: Gadolina, I.V., et al.
Veröffentlicht: (2009)
Prediction of residual pipeline resource taking into account the operation loading conditions
von: Banahevych, Yu.V., et al.
Veröffentlicht: (2009)
von: Banahevych, Yu.V., et al.
Veröffentlicht: (2009)
Shear Behavior of Non-Persistent Joint under High Normal Load
von: Sarfarazi, V., et al.
Veröffentlicht: (2017)
von: Sarfarazi, V., et al.
Veröffentlicht: (2017)
Simulation of the Spindle Coupled Multi-Axial Loading Fatigue Test of a Rear Axle
von: Dong, Z., et al.
Veröffentlicht: (2017)
von: Dong, Z., et al.
Veröffentlicht: (2017)
Ähnliche Einträge
-
Linear Micropolar Elasticity Analysis of Stresses in Bones under Static Loads
von: Eremeyev, V.A., et al.
Veröffentlicht: (2017) -
Analysis of the Contact Stresses in Curvic Couplings of Gas Turbine in a Blade-Off Event
von: Jiang, X.-J., et al.
Veröffentlicht: (2012) -
Thermomechanical Response of LNG Concrete Tank to Cryogenic Temperatures
von: Dahmani, L.
Veröffentlicht: (2011) -
Numerical Simulation of the Thermomechanical Behavior of a Hot Stamping Die
von: Jiang, Q.Y., et al.
Veröffentlicht: (2018) -
Elastoplastic Model of Sand under Complex Loading
von: Wan, Z., et al.
Veröffentlicht: (2018)