Influence of Differential Thermochemical Treatment of Bolts on Tightening Parameters in a Bolted Joint
This article presents the results of the research into the influence of heat treatment, with application of differential parameters and gas atmosphere, on the friction coefficient during the tightening of a bolted joint. The study consisted of several stages – it included metallographic examinations...
Gespeichert in:
| Veröffentlicht in: | Проблемы прочности |
|---|---|
| Datum: | 2016 |
| Hauptverfasser: | Graboń, W., Mucha, J., Osetek, M., Szlachta, J. |
| Format: | Artikel |
| Sprache: | Englisch |
| Veröffentlicht: |
Інститут проблем міцності ім. Г.С. Писаренко НАН України
2016
|
| Schlagworte: | |
| Online Zugang: | https://nasplib.isofts.kiev.ua/handle/123456789/173504 |
| Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
| Назва журналу: | Digital Library of Periodicals of National Academy of Sciences of Ukraine |
| Zitieren: | Influence of Differential Thermochemical Treatment of Bolts on Tightening Parameters in a Bolted Joint / W. Graboń, J. Mucha, M. Osetek, J. Szlachta // Проблемы прочности. — 2016. — № 4. — С. 30-44. — Бібліогр.: 24 назв. — англ. |
Institution
Digital Library of Periodicals of National Academy of Sciences of UkraineÄhnliche Einträge
Numerical Modeling and Mechanical Analysis of Combined Connection with Bolts and Welds
von: Liu, M.S, et al.
Veröffentlicht: (2016)
von: Liu, M.S, et al.
Veröffentlicht: (2016)
Assessment of contact strength of bolted joints of composite plates
von: Ya. L. Ivanytskyi, et al.
Veröffentlicht: (2019)
von: Ya. L. Ivanytskyi, et al.
Veröffentlicht: (2019)
Mechanical Behavior and Failure of Riveting Joints in Tensile and Shear Tests
von: Mucha, J., et al.
Veröffentlicht: (2015)
von: Mucha, J., et al.
Veröffentlicht: (2015)
Non-destructive quality control of roof bolting mounting
von: S. I. Skipochka, et al.
Veröffentlicht: (2015)
von: S. I. Skipochka, et al.
Veröffentlicht: (2015)
Reduce water inflow method in mine workings with bolting
von: O. P. Krukovskyi, et al.
Veröffentlicht: (2016)
von: O. P. Krukovskyi, et al.
Veröffentlicht: (2016)
Advanced mine working support using roof bolting
von: N. N. Kasjan, et al.
Veröffentlicht: (2011)
von: N. N. Kasjan, et al.
Veröffentlicht: (2011)
Technology of roof bolting of mine working at crossing of geological fault
von: A. P. Krukovskij, et al.
Veröffentlicht: (2017)
von: A. P. Krukovskij, et al.
Veröffentlicht: (2017)
Features of fracture of high-strength VT22 titanium bolts
von: O. M. Ivasyshyn, et al.
Veröffentlicht: (2015)
von: O. M. Ivasyshyn, et al.
Veröffentlicht: (2015)
FEM Analysis of Clinching Tool Load in a Joint of Dual-Phase Steels
von: Kaščák, L., et al.
Veröffentlicht: (2016)
von: Kaščák, L., et al.
Veröffentlicht: (2016)
Polish antroponims and toponyms and kontynuanty ancient Slavic root * bolt - // * grams - // * grm- in Slavic languages
von: J. Karzarnowicz
Veröffentlicht: (2013)
von: J. Karzarnowicz
Veröffentlicht: (2013)
FEM Analysis of Stress Distribution in the Hermetic Harmonic Drive Flexspline
von: Pacana, J., et al.
Veröffentlicht: (2017)
von: Pacana, J., et al.
Veröffentlicht: (2017)
Water stability influence of host rocks on the stability of mine working with frame and roof-bolting support
von: Ju. A. Vinogradov
Veröffentlicht: (2018)
von: Ju. A. Vinogradov
Veröffentlicht: (2018)
Experimental Study of Inconel 718 Surface Treatment by Edge Robotic Deburring with Force Control
von: Burghardt, A., et al.
Veröffentlicht: (2017)
von: Burghardt, A., et al.
Veröffentlicht: (2017)
Method of roof-bolting support of mining with the periodic strength of anchor-rock structure
von: O. P. Krukovskyi, et al.
Veröffentlicht: (2019)
von: O. P. Krukovskyi, et al.
Veröffentlicht: (2019)
Modification of the roof bolt support technology in the conditions of increasing coal mining intensity
von: O. P. Krukovskyi, et al.
Veröffentlicht: (2019)
von: O. P. Krukovskyi, et al.
Veröffentlicht: (2019)
Mechanical Properties of GF/pCBT Composites and Their Fusion-Bonded Joints: Influence of Process Parameters
von: Zhang, L., et al.
Veröffentlicht: (2015)
von: Zhang, L., et al.
Veröffentlicht: (2015)
Mechanical Properties of Friction Stir-Welded Joints of Aluminum Alloys
von: Chen, W.J., et al.
Veröffentlicht: (2015)
von: Chen, W.J., et al.
Veröffentlicht: (2015)
Formation of gas- and water-impermeable area in a mine working roof with injection bolts
von: V. V. Krukovska, et al.
Veröffentlicht: (2021)
von: V. V. Krukovska, et al.
Veröffentlicht: (2021)
Experimental and Numerical Investigations of an Asymmetric Multi-bolted Connection Preloaded and Subjected to Monotonic Loads
von: R. Grzejda, et al.
Veröffentlicht: (2023)
von: R. Grzejda, et al.
Veröffentlicht: (2023)
Water stability influence of host rocks on the process of water filtration into mine working with frame and roof-bolting support
von: V. V. Krukovska, et al.
Veröffentlicht: (2019)
von: V. V. Krukovska, et al.
Veröffentlicht: (2019)
Influence of Nanoalumina Particles on the Static and High-Cycle Fatigue Properties of Peel-Loaded Adhesive-Bonded Joints
von: Kubita, A., et al.
Veröffentlicht: (2016)
von: Kubita, A., et al.
Veröffentlicht: (2016)
Pulse Current Treatment Effect on the Strength of Reinforcing Steel and Its Weld Joint under Impact Loading
von: Kruszka, L., et al.
Veröffentlicht: (2009)
von: Kruszka, L., et al.
Veröffentlicht: (2009)
Fracture Assessment of the Weld–Base Metal Interface of High-Strength Steel Weld Joint
von: Zhong, Z.P., et al.
Veröffentlicht: (2018)
von: Zhong, Z.P., et al.
Veröffentlicht: (2018)
Nonlinearity of the Rock Joint Shear Strength
von: Wei, Y.F., et al.
Veröffentlicht: (2015)
von: Wei, Y.F., et al.
Veröffentlicht: (2015)
Review of new formats for fracture mechanics parameters
von: Landes, J.D., et al.
Veröffentlicht: (2006)
von: Landes, J.D., et al.
Veröffentlicht: (2006)
Finite Element Calculation of Clinching with Rigid Die of Three Steel Sheets
von: Kaščák, L., et al.
Veröffentlicht: (2017)
von: Kaščák, L., et al.
Veröffentlicht: (2017)
Износ штампа механического пресса в процессе клинч-соединения листов из высокопрочных сталей методом холодной формовки
von: Kaščák, L., et al.
Veröffentlicht: (2017)
von: Kaščák, L., et al.
Veröffentlicht: (2017)
Mechanical Properties of Dissimilar A356/SAPH440 Lap Joints by the Friction Stir Spot Welding and Self-Piercing Riveting
von: Bang, Han Sur, et al.
Veröffentlicht: (2018)
von: Bang, Han Sur, et al.
Veröffentlicht: (2018)
Analysis by Finite Element Method to Redesign a Jointed-Telescopic Crane for Elevation of Personnel
von: Diosdado-De la Peña, J.A., et al.
Veröffentlicht: (2017)
von: Diosdado-De la Peña, J.A., et al.
Veröffentlicht: (2017)
Study of properties of welded joint using Dantec’s Istra 4D systems
von: Domanski, T., et al.
Veröffentlicht: (2017)
von: Domanski, T., et al.
Veröffentlicht: (2017)
Effect of pulsed electric current treatment on corrosion of structural metals
von: Babutskii, A.I., et al.
Veröffentlicht: (2009)
von: Babutskii, A.I., et al.
Veröffentlicht: (2009)
Duplex surface treatment of stainless steel X12CrNi 18 8
von: Kadlec, J., et al.
Veröffentlicht: (2008)
von: Kadlec, J., et al.
Veröffentlicht: (2008)
Microstructure and Mechanical Properties of an Underwater Wet Welded Dissimilar Ferritic/Austenitic Steel Joint
von: Guo, N., et al.
Veröffentlicht: (2015)
von: Guo, N., et al.
Veröffentlicht: (2015)
Three-Dimensional Finite Element Analysis of Tensile-Shear Spot-Welded Joints in Tensile and Compressive Loading Conditions
von: Adib, H., et al.
Veröffentlicht: (2004)
von: Adib, H., et al.
Veröffentlicht: (2004)
Quantification of the Influence of Residual Stresses on Fatigue Strength of Al-Alloy Welded Joints by Means of the Local Strain Energy Density Approach
von: Ferro, P., et al.
Veröffentlicht: (2016)
von: Ferro, P., et al.
Veröffentlicht: (2016)
Modeling and influence of shear retention parameter on the response of reinforced concrete structural elements
von: Dahmani, L., et al.
Veröffentlicht: (2009)
von: Dahmani, L., et al.
Veröffentlicht: (2009)
Study on Fatigue Life of Plow Bit under Different Planning Parameters
von: Zhang, Q., et al.
Veröffentlicht: (2014)
von: Zhang, Q., et al.
Veröffentlicht: (2014)
Evaluation of Metal-Active Gas Double-Sided Double-Power Arc Welded Joints of High-Strength Low-Alloy Steel
von: Chen, Y.X., et al.
Veröffentlicht: (2015)
von: Chen, Y.X., et al.
Veröffentlicht: (2015)
Effect of Grinding Parameters on the Surface Quality of Cutting Tools Made of High-Speed Low-Alloy Steels
von: Jaworski, J., et al.
Veröffentlicht: (2016)
von: Jaworski, J., et al.
Veröffentlicht: (2016)
Experimental Analysis of the Influence of Structural Parameters on the Behavior of Glass-Fiber Reinforced Polypropylene Composites
von: Bounouas, L., et al.
Veröffentlicht: (2001)
von: Bounouas, L., et al.
Veröffentlicht: (2001)
Ähnliche Einträge
-
Numerical Modeling and Mechanical Analysis of Combined Connection with Bolts and Welds
von: Liu, M.S, et al.
Veröffentlicht: (2016) -
Assessment of contact strength of bolted joints of composite plates
von: Ya. L. Ivanytskyi, et al.
Veröffentlicht: (2019) -
Mechanical Behavior and Failure of Riveting Joints in Tensile and Shear Tests
von: Mucha, J., et al.
Veröffentlicht: (2015) -
Non-destructive quality control of roof bolting mounting
von: S. I. Skipochka, et al.
Veröffentlicht: (2015) -
Reduce water inflow method in mine workings with bolting
von: O. P. Krukovskyi, et al.
Veröffentlicht: (2016)