Influence of Nanoalumina Particles on the Static and High-Cycle Fatigue Properties of Peel-Loaded Adhesive-Bonded Joints
Results of research are aimed at determining the possibility of improving the static and fatigue properties of peel-loaded adhesive-bonded joints of S235JR steel with an alumina nanopowder dispersed in an epoxy adhesive. The static properties were assessed in a T-peel test. The high-cycle fatigue s...
Gespeichert in:
| Veröffentlicht in: | Проблемы прочности |
|---|---|
| Datum: | 2016 |
| ISSN: | 0556-171X |
| Hauptverfasser: | Kubita, A., Zielecki, W., Drabczyk, M. |
| Format: | Artikel |
| Sprache: | Englisch |
| Veröffentlicht: |
Інститут проблем міцності ім. Г.С. Писаренко НАН України
2016
|
| Schlagworte: | |
| Online Zugang: | https://nasplib.isofts.kiev.ua/handle/123456789/173506 |
| Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
| Назва журналу: | Digital Library of Periodicals of National Academy of Sciences of Ukraine |
| Zitieren: | Influence of Nanoalumina Particles on the Static and High-Cycle Fatigue Properties of Peel-Loaded Adhesive-Bonded Joints / A. Kubita, W. Zielecki, M. Drabczyk // Проблемы прочности. — 2016. — № 4. — С. 54-63. — Бібліогр.: 28 назв. — англ. |
Institution
Digital Library of Periodicals of National Academy of Sciences of UkraineÄhnliche Einträge
The Ultimate Tensile Strength of Coach Peel Self-Piercing Riveting Joints
von: X. He, et al.
Veröffentlicht: (2013)
von: X. He, et al.
Veröffentlicht: (2013)
The Ultimate Tensile Strength of Coach Peel Self-Piercing Riveting Joints
von: He, X., et al.
Veröffentlicht: (2013)
von: He, X., et al.
Veröffentlicht: (2013)
Welding or Adhesive Bonding — is this a question for the future?
von: U. Reisgen, et al.
Veröffentlicht: (2013)
von: U. Reisgen, et al.
Veröffentlicht: (2013)
Welding or Adhesive Bonding — is this a question for the future?
von: Reisgen, U., et al.
Veröffentlicht: (2013)
von: Reisgen, U., et al.
Veröffentlicht: (2013)
To Solving the Problems of Fatigue under Combined Loading by Static Torsion and Symmetric Cyclic Bending
von: V. N. Pelykh
Veröffentlicht: (2019)
von: V. N. Pelykh
Veröffentlicht: (2019)
Static and fatigue strength of basalt reinforcement
von: M. M. Hvozdiuk, et al.
Veröffentlicht: (2013)
von: M. M. Hvozdiuk, et al.
Veröffentlicht: (2013)
Stress Distribution Behavior in Single-Lap Adhesively Bonded Beams
von: He, X., et al.
Veröffentlicht: (2014)
von: He, X., et al.
Veröffentlicht: (2014)
Laser Beam Surface Pretreatment for the Adhesive Bond Strength Improvement
von: Ciecińska, B.
Veröffentlicht: (2016)
von: Ciecińska, B.
Veröffentlicht: (2016)
Investigation on the static fatigue mechanism and effect of specimen thickness on the static fatigue lifetime in WC–Co cemented carbides
von: Ding Chen, et al.
Veröffentlicht: (2018)
von: Ding Chen, et al.
Veröffentlicht: (2018)
Morphological and electronic characteristics of nanoalumina alone and in high-temperature (fumed) and low-temperature (mechanical) mixtures with nanosilica
von: Ya. V. Zaulychnyy, et al.
Veröffentlicht: (2014)
von: Ya. V. Zaulychnyy, et al.
Veröffentlicht: (2014)
Improvement of fatigue resistance of welded joints with accumulated damage at multistep and block loading
von: V. V. Knysh, et al.
Veröffentlicht: (2012)
von: V. V. Knysh, et al.
Veröffentlicht: (2012)
Calculation of fatigue of welded joints of load-carrying elements of cargo car carriage
von: L. M. Lobanov, et al.
Veröffentlicht: (2014)
von: L. M. Lobanov, et al.
Veröffentlicht: (2014)
Contact fatigue in low-cycle loading of Wc-Co hard alloys for metal working
von: Fal'kovskii, V.A., et al.
Veröffentlicht: (1985)
von: Fal'kovskii, V.A., et al.
Veröffentlicht: (1985)
Method for low-cycle fatigue life assessment of metallic materials under multiaxial loading
von: Shukaev, S., et al.
Veröffentlicht: (2008)
von: Shukaev, S., et al.
Veröffentlicht: (2008)
Oxide materials with the metal adhesive-mechanical joint
von: I. I. Gab, et al.
Veröffentlicht: (2015)
von: I. I. Gab, et al.
Veröffentlicht: (2015)
On differences in mechanisms of metal fracture in conditions of low-cycle and high-cycle fatigue
von: V. M. Matsevityj, et al.
Veröffentlicht: (2014)
von: V. M. Matsevityj, et al.
Veröffentlicht: (2014)
On differences in mechanisms of metal fracture in conditions of low-cycle and high-cycle fatigue
von: Мацевитый, В. М., et al.
Veröffentlicht: (2014)
von: Мацевитый, В. М., et al.
Veröffentlicht: (2014)
On differences in mechanisms of metal fracture in conditions of low-cycle and high-cycle fatigue
von: Мацевитый, В. М., et al.
Veröffentlicht: (2014)
von: Мацевитый, В. М., et al.
Veröffentlicht: (2014)
Investigation of the effect of refractory particles in slag on adhesion to refractories
von: E. N. Sigarev, et al.
Veröffentlicht: (2018)
von: E. N. Sigarev, et al.
Veröffentlicht: (2018)
Influence of irregular cyclic load on fatigue resistance of thinsheet welded joints of heat-strengthened aluminium alloys
von: V. V. Knysh, et al.
Veröffentlicht: (2021)
von: V. V. Knysh, et al.
Veröffentlicht: (2021)
The influence of high-frequency peening on corrosion fatigue of welded joints
von: V. V. Knysh, et al.
Veröffentlicht: (2017)
von: V. V. Knysh, et al.
Veröffentlicht: (2017)
Method of low-cycle fatigue test results processing
von: S. Mroziński, et al.
Veröffentlicht: (2012)
von: S. Mroziński, et al.
Veröffentlicht: (2012)
Method of low-cycle fatigue test results processing
von: Mroziński, S., et al.
Veröffentlicht: (2012)
von: Mroziński, S., et al.
Veröffentlicht: (2012)
A new stress-based multiaxial high-cycle fatigue damage criterion
von: Xin Li, et al.
Veröffentlicht: (2018)
von: Xin Li, et al.
Veröffentlicht: (2018)
Cyclic Inelasticity and High-Cycle Fatigue of Metals with Consideration of the Stress Gradient Effect
von: Troshchenko, V.T.
Veröffentlicht: (2011)
von: Troshchenko, V.T.
Veröffentlicht: (2011)
Increasing the Fatigue Strength of Welding Joints with Accumulasted Fatigue Damages by Surface Plastic Deformation
von: V. V. Knysh, et al.
Veröffentlicht: (2024)
von: V. V. Knysh, et al.
Veröffentlicht: (2024)
Bond Strength Deterioration of Reinforced and Prestressed Concrete Members at Reversed Cyclic Loads
von: Lee, J.-Y., et al.
Veröffentlicht: (2015)
von: Lee, J.-Y., et al.
Veröffentlicht: (2015)
Low-cycle fatigue calculation of gas turbine engine disks under flight cycle conditions
von: Karimbaev, K.D., et al.
Veröffentlicht: (2009)
von: Karimbaev, K.D., et al.
Veröffentlicht: (2009)
On the two-dimensional stressed state of the adhesive joint of the rectangular plates. The nonclassical problem
von: S. S. Kurennov, et al.
Veröffentlicht: (2018)
von: S. S. Kurennov, et al.
Veröffentlicht: (2018)
Predictive Performance of Artificial Neural Network and Multiple Linear Regression Models in Predicting Adhesive Bonding Strength of Wood
von: Bardak, S., et al.
Veröffentlicht: (2016)
von: Bardak, S., et al.
Veröffentlicht: (2016)
Fatigue analysis of structures during random loadings
von: Zarka, J., et al.
Veröffentlicht: (2009)
von: Zarka, J., et al.
Veröffentlicht: (2009)
High-Cycle Fatigue Properties and Damage Mechanism of Q345B Structural Steel
von: Hu, X.L., et al.
Veröffentlicht: (2017)
von: Hu, X.L., et al.
Veröffentlicht: (2017)
Registration and assessment of load cycles in pipelines
von: Torop, O., et al.
Veröffentlicht: (2009)
von: Torop, O., et al.
Veröffentlicht: (2009)
Influence of oxygen diffusion saturation on the fatigue and long-term static strength of titanium alloys
von: V. M. Fedirko, et al.
Veröffentlicht: (2014)
von: V. M. Fedirko, et al.
Veröffentlicht: (2014)
Conversion of Lagenaria Siceraria peel to reduced graphene oxide doped with zinc oxide nanoparticles for supercapacitor applications
von: Pratheepa, M.I., et al.
Veröffentlicht: (2021)
von: Pratheepa, M.I., et al.
Veröffentlicht: (2021)
Mathematical model of electric field in the zone of insulation peeling off the pipe surface under cathodic polarization
von: Lukovich, V. V., et al.
Veröffentlicht: (2013)
von: Lukovich, V. V., et al.
Veröffentlicht: (2013)
Conservation of magnetic moment of charged particles in static electromagnetic fields
von: Moiseenko, V.Е., et al.
Veröffentlicht: (2011)
von: Moiseenko, V.Е., et al.
Veröffentlicht: (2011)
Very intense non-static magnetic fields and particle production
von: Di Piazza, A., et al.
Veröffentlicht: (2001)
von: Di Piazza, A., et al.
Veröffentlicht: (2001)
Development of technology of formation of mechanical and adhesive-mechanical joints using a method of punching
von: Ju. S. Vasilev, et al.
Veröffentlicht: (2010)
von: Ju. S. Vasilev, et al.
Veröffentlicht: (2010)
Correlation of uniaxial cyclic torsion and tension-compression for low-cycle fatigue
von: T. Lagoda, et al.
Veröffentlicht: (2017)
von: T. Lagoda, et al.
Veröffentlicht: (2017)
Ähnliche Einträge
-
The Ultimate Tensile Strength of Coach Peel Self-Piercing Riveting Joints
von: X. He, et al.
Veröffentlicht: (2013) -
The Ultimate Tensile Strength of Coach Peel Self-Piercing Riveting Joints
von: He, X., et al.
Veröffentlicht: (2013) -
Welding or Adhesive Bonding — is this a question for the future?
von: U. Reisgen, et al.
Veröffentlicht: (2013) -
Welding or Adhesive Bonding — is this a question for the future?
von: Reisgen, U., et al.
Veröffentlicht: (2013) -
To Solving the Problems of Fatigue under Combined Loading by Static Torsion and Symmetric Cyclic Bending
von: V. N. Pelykh
Veröffentlicht: (2019)