FEM Analysis of Clinching Tool Load in a Joint of Dual-Phase Steels
The clinching tool with a die of 5 mm diameter with a specially formed gap and a punch of 3.6 mm diameter were used for mechanical joining of dual-phase steel sheets DP600 with the pressing force of 30 kN. The punch and die were deposited by PVD coating of CrN type with LARC technology. The coating...
Gespeichert in:
| Veröffentlicht in: | Проблемы прочности |
|---|---|
| Datum: | 2016 |
| Hauptverfasser: | , , , |
| Format: | Artikel |
| Sprache: | English |
| Veröffentlicht: |
Інститут проблем міцності ім. Г.С. Писаренко НАН України
2016
|
| Schlagworte: | |
| Online Zugang: | https://nasplib.isofts.kiev.ua/handle/123456789/173508 |
| Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
| Назва журналу: | Digital Library of Periodicals of National Academy of Sciences of Ukraine |
| Zitieren: | FEM Analysis of Clinching Tool Load in a Joint of Dual-Phase Steels / L. Kaščák, E. Spišák, R. Kubik, J. Mucha // Проблемы прочности. — 2016. — № 4. — С. 74-80. — Бібліогр.: 11 назв. — англ. |
Institution
Digital Library of Periodicals of National Academy of Sciences of Ukraine| Zusammenfassung: | The clinching tool with a die of 5 mm diameter with a specially formed gap and a punch of 3.6 mm diameter were used for mechanical joining of dual-phase steel sheets DP600 with the pressing force of 30 kN. The punch and die were deposited by PVD coating of CrN type with LARC technology. The coating state of each 50th manufactured join was evaluated by SEM. Cracks in the area of punch’s radius were detected. The finite element method was applied for the assessment of punch load in the joining process.
|
|---|---|
| ISSN: | 0556-171X |