FEM Analysis of Clinching Tool Load in a Joint of Dual-Phase Steels
The clinching tool with a die of 5 mm diameter with a specially formed gap and a punch of 3.6 mm diameter were used for mechanical joining of dual-phase steel sheets DP600 with the pressing force of 30 kN. The punch and die were deposited by PVD coating of CrN type with LARC technology. The coating...
Gespeichert in:
| Veröffentlicht in: | Проблемы прочности |
|---|---|
| Datum: | 2016 |
| Hauptverfasser: | , , , |
| Format: | Artikel |
| Sprache: | English |
| Veröffentlicht: |
Інститут проблем міцності ім. Г.С. Писаренко НАН України
2016
|
| Schlagworte: | |
| Online Zugang: | https://nasplib.isofts.kiev.ua/handle/123456789/173508 |
| Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
| Назва журналу: | Digital Library of Periodicals of National Academy of Sciences of Ukraine |
| Zitieren: | FEM Analysis of Clinching Tool Load in a Joint of Dual-Phase Steels / L. Kaščák, E. Spišák, R. Kubik, J. Mucha // Проблемы прочности. — 2016. — № 4. — С. 74-80. — Бібліогр.: 11 назв. — англ. |
Institution
Digital Library of Periodicals of National Academy of Sciences of Ukraine| id |
nasplib_isofts_kiev_ua-123456789-173508 |
|---|---|
| record_format |
dspace |
| spelling |
Kaščák, L. Spišák, E. Kubik, R. Mucha, J. 2020-12-07T20:21:36Z 2020-12-07T20:21:36Z 2016 FEM Analysis of Clinching Tool Load in a Joint of Dual-Phase Steels / L. Kaščák, E. Spišák, R. Kubik, J. Mucha // Проблемы прочности. — 2016. — № 4. — С. 74-80. — Бібліогр.: 11 назв. — англ. 0556-171X https://nasplib.isofts.kiev.ua/handle/123456789/173508 539.4 The clinching tool with a die of 5 mm diameter with a specially formed gap and a punch of 3.6 mm diameter were used for mechanical joining of dual-phase steel sheets DP600 with the pressing force of 30 kN. The punch and die were deposited by PVD coating of CrN type with LARC technology. The coating state of each 50th manufactured join was evaluated by SEM. Cracks in the area of punch’s radius were detected. The finite element method was applied for the assessment of punch load in the joining process. This work was supported by the Slovak Research and Development Agency under the Contract No. APVV-14-0834 and Project VEGA No. 1/0872/14. en Інститут проблем міцності ім. Г.С. Писаренко НАН України Проблемы прочности Научно-технический раздел FEM Analysis of Clinching Tool Load in a Joint of Dual-Phase Steels Конечноэлементный расчет нагружения пуансона в заклепочном соединении двухфазных сталей Article published earlier |
| institution |
Digital Library of Periodicals of National Academy of Sciences of Ukraine |
| collection |
DSpace DC |
| title |
FEM Analysis of Clinching Tool Load in a Joint of Dual-Phase Steels |
| spellingShingle |
FEM Analysis of Clinching Tool Load in a Joint of Dual-Phase Steels Kaščák, L. Spišák, E. Kubik, R. Mucha, J. Научно-технический раздел |
| title_short |
FEM Analysis of Clinching Tool Load in a Joint of Dual-Phase Steels |
| title_full |
FEM Analysis of Clinching Tool Load in a Joint of Dual-Phase Steels |
| title_fullStr |
FEM Analysis of Clinching Tool Load in a Joint of Dual-Phase Steels |
| title_full_unstemmed |
FEM Analysis of Clinching Tool Load in a Joint of Dual-Phase Steels |
| title_sort |
fem analysis of clinching tool load in a joint of dual-phase steels |
| author |
Kaščák, L. Spišák, E. Kubik, R. Mucha, J. |
| author_facet |
Kaščák, L. Spišák, E. Kubik, R. Mucha, J. |
| topic |
Научно-технический раздел |
| topic_facet |
Научно-технический раздел |
| publishDate |
2016 |
| language |
English |
| container_title |
Проблемы прочности |
| publisher |
Інститут проблем міцності ім. Г.С. Писаренко НАН України |
| format |
Article |
| title_alt |
Конечноэлементный расчет нагружения пуансона в заклепочном соединении двухфазных сталей |
| description |
The clinching tool with a die of 5 mm diameter with a specially formed gap and a punch of 3.6 mm diameter were used for mechanical joining of dual-phase steel sheets DP600 with the pressing force of 30 kN. The punch and die were deposited by PVD coating of CrN type with LARC technology. The coating state of each 50th manufactured join was evaluated by SEM. Cracks in the area of punch’s radius were detected. The finite element method was applied for the assessment of punch load in the joining process.
|
| issn |
0556-171X |
| url |
https://nasplib.isofts.kiev.ua/handle/123456789/173508 |
| citation_txt |
FEM Analysis of Clinching Tool Load in a Joint of Dual-Phase Steels / L. Kaščák, E. Spišák, R. Kubik, J. Mucha // Проблемы прочности. — 2016. — № 4. — С. 74-80. — Бібліогр.: 11 назв. — англ. |
| work_keys_str_mv |
AT kascakl femanalysisofclinchingtoolloadinajointofdualphasesteels AT spisake femanalysisofclinchingtoolloadinajointofdualphasesteels AT kubikr femanalysisofclinchingtoolloadinajointofdualphasesteels AT muchaj femanalysisofclinchingtoolloadinajointofdualphasesteels AT kascakl konečnoélementnyirasčetnagruženiâpuansonavzaklepočnomsoedineniidvuhfaznyhstalei AT spisake konečnoélementnyirasčetnagruženiâpuansonavzaklepočnomsoedineniidvuhfaznyhstalei AT kubikr konečnoélementnyirasčetnagruženiâpuansonavzaklepočnomsoedineniidvuhfaznyhstalei AT muchaj konečnoélementnyirasčetnagruženiâpuansonavzaklepočnomsoedineniidvuhfaznyhstalei |
| first_indexed |
2025-11-29T12:19:34Z |
| last_indexed |
2025-11-29T12:19:34Z |
| _version_ |
1850854892441174016 |