Numerical Simulation of Rotary Compression Process of Hollow Balls
This paper presents results of the analysis of numerical Simulation of rotary compression process of hollow ball forging. Numerical analysis is conducted based on the finite element method using the Simufact Forming software. The methods of hollow ball forming are discussed with presentation of the...
Збережено в:
| Опубліковано в: : | Проблемы прочности |
|---|---|
| Дата: | 2016 |
| Автори: | , |
| Формат: | Стаття |
| Мова: | Англійська |
| Опубліковано: |
Інститут проблем міцності ім. Г.С. Писаренко НАН України
2016
|
| Теми: | |
| Онлайн доступ: | https://nasplib.isofts.kiev.ua/handle/123456789/173514 |
| Теги: |
Додати тег
Немає тегів, Будьте першим, хто поставить тег для цього запису!
|
| Назва журналу: | Digital Library of Periodicals of National Academy of Sciences of Ukraine |
| Цитувати: | Numerical Simulation of Rotary Compression Process of Hollow Balls / D. Skrochocki, J. Tomczak // Проблемы прочности. — 2016. — № 4. — С. 129-138. — Бібліогр.: 11 назв. — англ. |
Репозитарії
Digital Library of Periodicals of National Academy of Sciences of Ukraine| Резюме: | This paper presents results of the analysis of numerical Simulation of rotary compression process of hollow ball forging. Numerical analysis is conducted based on the finite element method using the Simufact Forming software. The methods of hollow ball forming are discussed with presentation of the geometrical model applied in calculations and the obtained rotary compression process description. The simulation is conducted under three-dimensional strain conditions. Strain, stress and temperature distributions are determined. The diagrams of forces and rotary moments of the hollow forging compression process are given. The described results of the numerical analysis confirm the possibility of producing the hollow balls by means of rotary compression with the use of billet in the form of a pipe part.
|
|---|---|
| ISSN: | 0556-171X |