Inclined Hole under Different Loading Conditions: A Review of Recent Results

Three-dimensional (3D) elastic stress distributions in the vicinity of the sharp corners of an inclined diamond hole in a plate are investigated. A detailed 3D finite element model under different loading conditions is analyzed to study the intensity of different fracture modes due to the thickness...

Ausführliche Beschreibung

Gespeichert in:

Bibliographische Detailangaben
Veröffentlicht in:	Проблемы прочности
Datum:	2016
ISSN:	0556-171X
Hauptverfasser:	Berto, F., Afshar, Reza H.
Format:	Artikel
Sprache:	Englisch
Veröffentlicht:	Інститут проблем міцності ім. Г.С. Писаренко НАН України 2016
Schlagworte:	Научно-технический раздел
Online Zugang:	https://nasplib.isofts.kiev.ua/handle/123456789/173541
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:	Digital Library of Periodicals of National Academy of Sciences of Ukraine
Zitieren:	Inclined Hole under Different Loading Conditions: A Review of Recent Results / F. Berto,Reza H. Afshar // Проблемы прочности. — 2016. — № 5. — С. 95-105. — Бібліогр.: 18 назв. — англ.

Institution

Digital Library of Periodicals of National Academy of Sciences of Ukraine

Ähnliche Einträge

Brittle Failure of Graphite Weakened by V-Notches: A Review of Some Recent Results under Different Loading Modes
von: Berto, F., et al.
Veröffentlicht: (2015)

Effects of Geometrical Parameters on the Stress Field of Three-Dimensional Plates Weakened by Periodic Notches
von: Amini, A., et al.
Veröffentlicht: (2014)

Tensile Fracture Analysis of Key-Hole Notches by Means of the Strain Energy Density
von: Torabi, A.R., et al.
Veröffentlicht: (2016)

Fracture of Polymethylmethacrylate under Pulse Loading Conditions
von: Atroshenko, S.A., et al.
Veröffentlicht: (2002)

Behavior of Self-Compacting Concrete-Filled Steel Tube Columns with Inclined Stiffener Ribs under Axial Compression
von: Liang, W., et al.
Veröffentlicht: (2017)

Investigation of Fracture of Spheroplastics under Static and Dynamic Loading Conditions
von: Atroshenko, S.A., et al.
Veröffentlicht: (2002)

Lateral Torsional Buckling Response of Steel Beam with Different Boundary Conditions and Loading
von: Dahmani, L., et al.
Veröffentlicht: (2014)

Effect of the Loading Rate on the Brittle Fracture of Terfenol-D Specimens in Magnetic Field: Strain Energy Density Approach
von: Colussi, M., et al.
Veröffentlicht: (2016)

Nonlinear Fracture of Functionally Graded Beams under Mode II Loading Conditions
von: Rizov, V.I.
Veröffentlicht: (2016)

Effect of the Microcrack Inclination Angle on Crack Propagation Behavior of TiAl Alloy
von: Feng, R.C., et al.
Veröffentlicht: (2017)

Simulating the Crack Propagation Mechanism of Pre-Cracked Concrete Specimens under Shear Loading Conditions
von: Haeri, H.
Veröffentlicht: (2015)

Elastoplastic Model of Sand under Complex Loading
von: Wan, Z., et al.
Veröffentlicht: (2018)

Energy Absorption Optimization of Multiaction Plastic Working Element of Vehicle Systems under Emergency Impact Loading Conditions
von: Boiko, A.
Veröffentlicht: (2002)

Linear Micropolar Elasticity Analysis of Stresses in Bones under Static Loads
von: Eremeyev, V.A., et al.
Veröffentlicht: (2017)

Response of an Indented Square Tube under Impact Loading
von: Tan, Z.H., et al.
Veröffentlicht: (2015)

Deformation and fracture of high-temperature steels at different temperatures and loading rates
von: Kondryakov, E.A., et al.
Veröffentlicht: (2009)

Vacuum Crack Growth Behavior of Austenitic Stainless Steel under Fatigue Loading
von: Takeda, T., et al.
Veröffentlicht: (2011)

Recent developments to improve the quality and economics of testing for fatigue and fracture
von: Sunder, R.
Veröffentlicht: (2009)

Simulation of the Mechanical Characteristics of a Granular Matter Tested under Biaxial Loading
von: Bi, Z.W., et al.
Veröffentlicht: (2015)

Vibrations of a Complex Systems with Damping under Dynamic Loading
von: Cabanska-Placzkiewicz, K.
Veröffentlicht: (2002)

Fatigue Fracture Analysis of Composite Plates with an Elliptical Hole
von: Kielbasa, B., et al.
Veröffentlicht: (2017)

Analysis of Gas Nitriding Characteristics under Different Cold Hardening and Nitriding Pressure Conditions for Low-Carbon Low-Alloy Steel
von: Zhou, Z A., et al.
Veröffentlicht: (2018)

Evolution of discrete phenomena of inelasticity in aluminum alloy under cyclic loading
von: Pisarenko, G.G., et al.
Veröffentlicht: (2009)

Shear Behavior of Non-Persistent Joint under High Normal Load
von: Sarfarazi, V., et al.
Veröffentlicht: (2017)

Radiation-Induced Embrittlement of WWER-440 Reactor Pressure Vessel Steel under Loading
von: Grinik, E.U., et al.
Veröffentlicht: (2003)

Quantification of the Influence of Residual Stresses on Fatigue Strength of Al-Alloy Welded Joints by Means of the Local Strain Energy Density Approach
von: Ferro, P., et al.
Veröffentlicht: (2016)

Prediction of residual pipeline resource taking into account the operation loading conditions
von: Banahevych, Yu.V., et al.
Veröffentlicht: (2009)

Crack initiation and endurance limit of hard steels under multiaxial cyclic loads
von: Bomas, H., et al.
Veröffentlicht: (2008)

Analysis of Viscoelastoplastic Behavior of Expanded Polystyrene under Compressive Loading: Experiments and Modeling
von: Imad, A., et al.
Veröffentlicht: (2001)

Elastoplastic Damage Model for Concrete under Triaxial Compression and Reversed Cyclic Loading
von: Zhang, J., et al.
Veröffentlicht: (2018)

Experimental and Theoretical Design Methodology of Hemispherical Shells under Extreme Static Loading
von: Galiev, Sh.U., et al.
Veröffentlicht: (2004)

Residual Strains of Filter Materials Reinforced with Grid Inclusions under Cyclic Loading
von: Lin, Y.L., et al.
Veröffentlicht: (2015)

Compressive Properties of SiC Particle-Reinforced Aluminum Matrix Composites under Repeated Impact Loading
von: Cao, D.F., et al.
Veröffentlicht: (2015)

Area and point approaches in fatigue life evaluation under combined bending and torsion loading
von: Karolczuk, A., et al.
Veröffentlicht: (2008)

Surface Strengthening Behavior of Magnesium Alloy with Laser Thermal Loading under Rapid Cooling
von: Ge, Y.Q., et al.
Veröffentlicht: (2018)

Method for low-cycle fatigue life assessment of metallic materials under multiaxial loading
von: Shukaev, S., et al.
Veröffentlicht: (2008)

Numerical and Experimental Analyses of Vibrations of Annular Plates with Multiple Eccentric Holes
von: Noga, S.
Veröffentlicht: (2016)

Investigation of Fracturing Process of Rock-Like Brazilian Disks Containing Three Parallel Cracks under Compressive Line Loading
von: Haeri, H., et al.
Veröffentlicht: (2014)

Notch Effect on the Fatigue Behavior of a Hot Dip Galvanized Structural Steel
von: Berto, F., et al.
Veröffentlicht: (2015)

Study on High-Strength Ring Chain Dynamic Characteristics under Different Launch Parameters
von: Zhang, Q., et al.
Veröffentlicht: (2018)