Experimental-Numerical Study of Tensile Strength of the High-Strength Steel S690QL at Elevated Temperatures
We present the experimental-numerical analysis of the influence of temperature on mechanical properties of structural high-strength steel class S690QL. Since the steel S690QL belongs to a group of steels with good mechanical properties, the aim of this paper is to determine the highest temperatures...
Збережено в:
| Опубліковано в: : | Проблемы прочности |
|---|---|
| Дата: | 2016 |
| Автори: | Arsić, D., Djordjević, M., Zivković, J., Sedmak, A., Aleksandrović, S., Lazić, V., Rakić, D. |
| Формат: | Стаття |
| Мова: | Англійська |
| Опубліковано: |
Інститут проблем міцності ім. Г.С. Писаренко НАН України
2016
|
| Теми: | |
| Онлайн доступ: | https://nasplib.isofts.kiev.ua/handle/123456789/173543 |
| Теги: |
Додати тег
Немає тегів, Будьте першим, хто поставить тег для цього запису!
|
| Назва журналу: | Digital Library of Periodicals of National Academy of Sciences of Ukraine |
| Цитувати: | Experimental-Numerical Study of Tensile Strength of the High-Strength Steel S690QL at Elevated Temperatures / D. Arsić, M. Djordjević, J. Zivković, A. Sedmak, S. Aleksandrović, V. Lazić, D. Rakić // Проблемы прочности. — 2016. — № 5. — С. 118-128. — Бібліогр.: 23 назв. — англ. |
Репозитарії
Digital Library of Periodicals of National Academy of Sciences of UkraineСхожі ресурси
Physico-mechanical properties of welded joints of high-strength steel with the yield strength of 690…1300 MPa
за авторством: O. M. Berdnikova
Опубліковано: (2021)
за авторством: O. M. Berdnikova
Опубліковано: (2021)
Experimental Investigation on the Tensile Strength of Composite Laminates Containing Open and Filled Holes
за авторством: Fan, X.L., та інші
Опубліковано: (2014)
за авторством: Fan, X.L., та інші
Опубліковано: (2014)
Experimental Investigation on the Tensile Strength of Composite Laminates Containing Open and Filled Holes
за авторством: X. L. Fan, та інші
Опубліковано: (2014)
за авторством: X. L. Fan, та інші
Опубліковано: (2014)
Modeling and assessing of steel strength for turbogenerators under complex loading and at elevated temperatures
за авторством: Ya. L. Ivanytskyi, та інші
Опубліковано: (2021)
за авторством: Ya. L. Ivanytskyi, та інші
Опубліковано: (2021)
Tensile strength of the brittle materials, probabilistic or deterministic approach?
за авторством: Jeong, J., та інші
Опубліковано: (2006)
за авторством: Jeong, J., та інші
Опубліковано: (2006)
Investigation of influence of plasticity materials on tensile strength of the composite joint
за авторством: M. V. Dudyk, та інші
Опубліковано: (2013)
за авторством: M. V. Dudyk, та інші
Опубліковано: (2013)
The Ultimate Tensile Strength of Coach Peel Self-Piercing Riveting Joints
за авторством: He, X., та інші
Опубліковано: (2013)
за авторством: He, X., та інші
Опубліковано: (2013)
The Ultimate Tensile Strength of Coach Peel Self-Piercing Riveting Joints
за авторством: X. He, та інші
Опубліковано: (2013)
за авторством: X. He, та інші
Опубліковано: (2013)
The influence of oxygen-containing lead melts on long-term strength of AISI 409L steel at elevated temperatures
за авторством: O. I. Yaskiv, та інші
Опубліковано: (2014)
за авторством: O. I. Yaskiv, та інші
Опубліковано: (2014)
Fatigue lifetime of ADI from ultimate tensile strength to permanent fatigue limit
за авторством: Zapletal, J., та інші
Опубліковано: (2008)
за авторством: Zapletal, J., та інші
Опубліковано: (2008)
Influence of temperature and exploitation time on fatigue strength and microstructure of welded joints of A-387Gr.B steel
за авторством: I. Čamagić, та інші
Опубліковано: (2021)
за авторством: I. Čamagić, та інші
Опубліковано: (2021)
Weldability of high-strength alloyed steels with yield strength of 590...785 MPa
за авторством: V. D. Poznjakov
Опубліковано: (2018)
за авторством: V. D. Poznjakov
Опубліковано: (2018)
Correlation Between the Level of Brittle Strength and Yield Strength of Structural Steel
за авторством: S. A. Kotrechko, та інші
Опубліковано: (2015)
за авторством: S. A. Kotrechko, та інші
Опубліковано: (2015)
Laser-arc welding of high-strength steels with yield strength of more than 700 MPa
за авторством: V. D. Poznjakov, та інші
Опубліковано: (2015)
за авторством: V. D. Poznjakov, та інші
Опубліковано: (2015)
Structural criteria of strength and crack resistance of high-strength steels and their welded joints
за авторством: O. M. Berdnikova
Опубліковано: (2021)
за авторством: O. M. Berdnikova
Опубліковано: (2021)
The influence of welding energy on strength of high-strength S960QC steel joints
за авторством: I. R. Dzioba, та інші
Опубліковано: (2019)
за авторством: I. R. Dzioba, та інші
Опубліковано: (2019)
Dynamic tensile strength of ceramic-matrix composites of the BL group, which are obtained in the cBN–carbide–Al systems
за авторством: D. A. Stratiichuk, та інші
Опубліковано: (2024)
за авторством: D. A. Stratiichuk, та інші
Опубліковано: (2024)
Formation of cold cracks in welded joints of high-strength steels with 350-850 MPa yield strength
за авторством: L. M. Lobanov, та інші
Опубліковано: (2013)
за авторством: L. M. Lobanov, та інші
Опубліковано: (2013)
Calculation of theoretical strength of metals and experimental approbation
за авторством: B. K. Hanulich, та інші
Опубліковано: (2020)
за авторством: B. K. Hanulich, та інші
Опубліковано: (2020)
Numerical modeling and prediction of microstructure of welded joint metal in high-strength steel welding (Review)
за авторством: Ju. Ermolenko, та інші
Опубліковано: (2014)
за авторством: Ju. Ermolenko, та інші
Опубліковано: (2014)
Weldability of high-strength microalloyed steel S460M
за авторством: V. D. Poznjakov, та інші
Опубліковано: (2016)
за авторством: V. D. Poznjakov, та інші
Опубліковано: (2016)
Prediction of temperatures of phase transformations in high-strength low-alloy steels
за авторством: G. M. Grigorenko, та інші
Опубліковано: (2013)
за авторством: G. M. Grigorenko, та інші
Опубліковано: (2013)
Strength and fatigue crack growth resistance of as-cast graphitic steels
за авторством: I. M. Andreiko, та інші
Опубліковано: (2013)
за авторством: I. M. Andreiko, та інші
Опубліковано: (2013)
Mechanical properties and fracture behavior of high-strength steels
за авторством: Musalek, R., та інші
Опубліковано: (2008)
за авторством: Musalek, R., та інші
Опубліковано: (2008)
On the concept of steels selection for high-strength railway wheels
за авторством: O. P. Ostash, та інші
Опубліковано: (2012)
за авторством: O. P. Ostash, та інші
Опубліковано: (2012)
Influence of doping level on the strength properties of structural steels
за авторством: A. S. Kozachjok, та інші
Опубліковано: (2014)
за авторством: A. S. Kozachjok, та інші
Опубліковано: (2014)
EXPERIMENTAL RESEARCH ON DIELECTRIC STRENGTH OF PEEIDH-0.63 WIRE
за авторством: Gurin, A. G., та інші
Опубліковано: (2013)
за авторством: Gurin, A. G., та інші
Опубліковано: (2013)
Experimental Study of the Effects of a Constant and Variable Electric Fields on the Strength Properties of the Blade Steel Surface Layer
за авторством: Nechaev, A.V.
Опубліковано: (2019)
за авторством: Nechaev, A.V.
Опубліковано: (2019)
Experimental Study of the Effects of a Constant and Variable Electric Fields on the Strength Properties of the Blade Steel Surface Layer
за авторством: Nechaev, A. V.
Опубліковано: (2019)
за авторством: Nechaev, A. V.
Опубліковано: (2019)
Experimental Study of the Effects of a Constant and Variable Electric Fields on the Strength Properties of the Blade Steel Surface Layer
за авторством: Nechaev, A. V.
Опубліковано: (2019)
за авторством: Nechaev, A. V.
Опубліковано: (2019)
Experimental Study of the Effects of a Constant and Variable Electric Fields on the Strength Properties of the Blade Steel Surface Layer
за авторством: A. V. Nechaev
Опубліковано: (2019)
за авторством: A. V. Nechaev
Опубліковано: (2019)
Risk of cold crack formation in welding of structural high-strength steels
за авторством: V. I. Makhnenko, та інші
Опубліковано: (2009)
за авторством: V. I. Makhnenko, та інші
Опубліковано: (2009)
Wet underwater welding of low-alloy steels of increased strength
за авторством: Ju. Maksimov, та інші
Опубліковано: (2013)
за авторством: Ju. Maksimov, та інші
Опубліковано: (2013)
Mechanical strength of the weld metal in CK45 carbon steel
за авторством: H. R. Ghazvinloo, та інші
Опубліковано: (2020)
за авторством: H. R. Ghazvinloo, та інші
Опубліковано: (2020)
Strength and specifics of fracture of welded joints of high-strength aluminium alloys at low temperature
за авторством: T. M. Labur
Опубліковано: (2011)
за авторством: T. M. Labur
Опубліковано: (2011)
Numerical analysis of strain and stress state in cylindrical notched tensile specimens
за авторством: Derpenski, L., та інші
Опубліковано: (2013)
за авторством: Derpenski, L., та інші
Опубліковано: (2013)
Numerical analysis of strain and stress state in cylindrical notched tensile specimens
за авторством: L. Derpenski, та інші
Опубліковано: (2013)
за авторством: L. Derpenski, та інші
Опубліковано: (2013)
Mechanical properties of medium- and high-carbon cast steel after tensile testing at increased temperatures
за авторством: Ju. Borisenko, та інші
Опубліковано: (2017)
за авторством: Ju. Borisenko, та інші
Опубліковано: (2017)
Physical Justification for the Experimental Determination of the Brittle Strength RMC of Structural Steels, According to the Results of the Samples Testing with a Stress Raiser
за авторством: S. A. Kotrechko, та інші
Опубліковано: (2013)
за авторством: S. A. Kotrechko, та інші
Опубліковано: (2013)
Structural estimation of crack resistance of welded joints of high strength steels
за авторством: Бердникова, Елена Николаевна
Опубліковано: (2014)
за авторством: Бердникова, Елена Николаевна
Опубліковано: (2014)
Схожі ресурси
-
Physico-mechanical properties of welded joints of high-strength steel with the yield strength of 690…1300 MPa
за авторством: O. M. Berdnikova
Опубліковано: (2021) -
Experimental Investigation on the Tensile Strength of Composite Laminates Containing Open and Filled Holes
за авторством: Fan, X.L., та інші
Опубліковано: (2014) -
Experimental Investigation on the Tensile Strength of Composite Laminates Containing Open and Filled Holes
за авторством: X. L. Fan, та інші
Опубліковано: (2014) -
Modeling and assessing of steel strength for turbogenerators under complex loading and at elevated temperatures
за авторством: Ya. L. Ivanytskyi, та інші
Опубліковано: (2021) -
Tensile strength of the brittle materials, probabilistic or deterministic approach?
за авторством: Jeong, J., та інші
Опубліковано: (2006)