Investigation of Plastic Behavior of Alloyed Steel Deformed during Martensitic Transformation
We present the investigation of permanent strain of steel specimen occurred when metallurgical transformations take place even under small stress applied externally lower than the yield stress of material. Three alloyed steel grades were investigated: THG2000 (Uddeholm, Sweden), 40Kh13 and 95Kh18 (G...
Saved in:
| Published in: | Проблемы прочности |
|---|---|
| Date: | 2016 |
| Main Authors: | Kandrotaitė-Janutienė, R., Baltušnikas, A. |
| Format: | Article |
| Language: | English |
| Published: |
Інститут проблем міцності ім. Г.С. Писаренко НАН України
2016
|
| Subjects: | |
| Online Access: | https://nasplib.isofts.kiev.ua/handle/123456789/173544 |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Journal Title: | Digital Library of Periodicals of National Academy of Sciences of Ukraine |
| Cite this: | Investigation of Plastic Behavior of Alloyed Steel Deformed during Martensitic Transformation / R. Kandrotaitė-Janutienė, A. Baltušnikas // Проблемы прочности. — 2016. — № 5. — С. 129-137. — Бібліогр.: 23 назв. — англ. |
Institution
Digital Library of Periodicals of National Academy of Sciences of UkraineSimilar Items
External Stress Effect on Microstructure and Transformation Plasticity of Hot Work Tool Steel during Quenching
by: Janutienë, R.K., et al.
Published: (2015)
by: Janutienë, R.K., et al.
Published: (2015)
Assessment of the Low-Cycle Strain-Induced Martensite Transformation in AISI 316 Stainless Steel by Magnetic and Acoustic Nondestructive Methods
by: Kim, C.S.
Published: (2018)
by: Kim, C.S.
Published: (2018)
Deformability Behavior of St3 Steel Used in the Profiles of High-Voltage Poles
by: Jutas, A., et al.
Published: (2018)
by: Jutas, A., et al.
Published: (2018)
Localization of plastic deformation and fracture in aluminum polycrystals
by: Zarikovskaya, N.V., et al.
Published: (2008)
by: Zarikovskaya, N.V., et al.
Published: (2008)
Compression Behavior of Biodegradable Thermoplastic Plasticizer-Containing Composites
by: Guo, A.F., et al.
Published: (2019)
by: Guo, A.F., et al.
Published: (2019)
Numerical Simulation of Fatigue Damage and Shape Instability Behavior of Steel 40Cr by the Damage-Coupled Crystal Plastic Model
by: Wu, G.C., et al.
Published: (2017)
by: Wu, G.C., et al.
Published: (2017)
The Effect of Notch Tip Position on the Charpy Impact Energy for Bainitic and Martensitic Functionally Graded Steel
by: Eskandari Jam, J., et al.
Published: (2014)
by: Eskandari Jam, J., et al.
Published: (2014)
Strength Improvement of Ferritic/Martensitic T91 Steel by Cross Wedge Rolling at Different Austenitizing Temperatures
by: He, T., et al.
Published: (2017)
by: He, T., et al.
Published: (2017)
Constitutive Behavior of 4343/4A60 Aluminum Alloy at Multi-Pass Hot Deformation
by: Tang, C., et al.
Published: (2017)
by: Tang, C., et al.
Published: (2017)
Plasticity at Martensitic Transformation in Co—Ni Alloys
by: V. A. Lobodjuk
Published: (2013)
by: V. A. Lobodjuk
Published: (2013)
Non-Monotonous Mechanical Behavior at the Nanoscale: Elastic and Plastic Properties
by: Zhang, X., et al.
Published: (2015)
by: Zhang, X., et al.
Published: (2015)
Mechanical properties and fracture behavior of high-strength steels
by: Musalek, R., et al.
Published: (2008)
by: Musalek, R., et al.
Published: (2008)
Sedimentation Influence on Magnetorheological Brake Torque Moment
by: Vėžys, J., et al.
Published: (2018)
by: Vėžys, J., et al.
Published: (2018)
Effect of Forging on Cyclic Hardening Behavior of CW 614 Brass Alloy
by: Mnif, R., et al.
Published: (2011)
by: Mnif, R., et al.
Published: (2011)
Experimental and Numerical Analysis of Springback Behavior of Aluminum Alloys
by: Slota, J., et al.
Published: (2017)
by: Slota, J., et al.
Published: (2017)
Effect of severe plastic deformation on radiation hardening of T91 ferritic-martensitic steel
by: Voyevodin, V.N., et al.
Published: (2021)
by: Voyevodin, V.N., et al.
Published: (2021)
Deformation and fracture of high-temperature steels at different temperatures and loading rates
by: Kondryakov, E.A., et al.
Published: (2009)
by: Kondryakov, E.A., et al.
Published: (2009)
Effect of the Microcrack Inclination Angle on Crack Propagation Behavior of TiAl Alloy
by: Feng, R.C., et al.
Published: (2017)
by: Feng, R.C., et al.
Published: (2017)
Effect of the Surface Texture on Laser Joining of a Carbon Fiber-Reinforced Thermosetting Plastic and Stainless Steel
by: Sheng, L.Y., et al.
Published: (2019)
by: Sheng, L.Y., et al.
Published: (2019)
Notch Effect on the Fatigue Behavior of a Hot Dip Galvanized Structural Steel
by: Berto, F., et al.
Published: (2015)
by: Berto, F., et al.
Published: (2015)
Assessment of the Microstructure and Mechanical Properties of a Laser-Joined Carbon Fiber-Reinforced Thermosetting Plastic and Stainless Steel
by: Sheng, L.Y., et al.
Published: (2018)
by: Sheng, L.Y., et al.
Published: (2018)
Cryogenic Fracture Behavior of Metastable Austenitic Stainless Steel in a High Magnetic Field
by: Shindo, Y., et al.
Published: (2010)
by: Shindo, Y., et al.
Published: (2010)
Mechanical Behavior of the Weld Joints of Thick Steel Plates Produced by Various Welding Processes
by: Bang, HanSur, et al.
Published: (2015)
by: Bang, HanSur, et al.
Published: (2015)
Study on Behavior of RPC Filled Steel Tubular Stub Columns under Axial Compression
by: Liu, S.H., et al.
Published: (2017)
by: Liu, S.H., et al.
Published: (2017)
Constitutive description of creep behavior of Mg-4 Al-1Ca alloy
by: Milicka, K., et al.
Published: (2008)
by: Milicka, K., et al.
Published: (2008)
Investigation of Ultrasonic Assisted Friction Stir Spot Welding of Magnesium Alloy to Aluminum Alloy
by: Ji, S.D., et al.
Published: (2016)
by: Ji, S.D., et al.
Published: (2016)
Coupled Effects of Strain Rate and Temperature on Deformation Twinning in Cu-Zn Alloy
by: Zhou, P., et al.
Published: (2016)
by: Zhou, P., et al.
Published: (2016)
Microstructure and Microhardness of Fiber Laser Welded Dual-Phase Steels with High-Strength Low-Alloy Steels
by: Švec, P., et al.
Published: (2017)
by: Švec, P., et al.
Published: (2017)
A Probabilistic Model for Describing Short Fatigue Crack Growth Behavior of LZ50 Steel
by: Yang, B., et al.
Published: (2016)
by: Yang, B., et al.
Published: (2016)
Fatigue behavior of dissimilar friction stir welds between cast and wrought aluminum alloys
by: Uematsu, Y., et al.
Published: (2008)
by: Uematsu, Y., et al.
Published: (2008)
Surface Strengthening Behavior of Magnesium Alloy with Laser Thermal Loading under Rapid Cooling
by: Ge, Y.Q., et al.
Published: (2018)
by: Ge, Y.Q., et al.
Published: (2018)
Hot-cracking of high-alloyed steels evaluated by wedge rolling test
by: Schindler, I., et al.
Published: (2008)
by: Schindler, I., et al.
Published: (2008)
Short Fatigue Crack Behavior of LZ50 Axle Steel under Rotating-Bending Cyclic Loading
by: Yang, B., et al.
Published: (2018)
by: Yang, B., et al.
Published: (2018)
Austenite Grain Growth Behavior of 20Mn5 Steel Used for Heavy Hydro-Generator Shaft
by: Liu, M., et al.
Published: (2018)
by: Liu, M., et al.
Published: (2018)
Behavior of Self-Compacting Concrete-Filled Steel Tube Columns with Inclined Stiffener Ribs under Axial Compression
by: Liang, W., et al.
Published: (2017)
by: Liang, W., et al.
Published: (2017)
Surface Treatment with the Cold Roll Bonding Process for an Aluminum Alloy and Mild Steel
by: Tang, C., et al.
Published: (2015)
by: Tang, C., et al.
Published: (2015)
Martensitic Transformations in Stainless Steels
by: I. E. Volokitina, et al.
Published: (2022)
by: I. E. Volokitina, et al.
Published: (2022)
Corrosion fatigue behavior of extruded AZ80, AZ61, and AM60 magnesium alloys in distilled water
by: Uematsu, Y., et al.
Published: (2008)
by: Uematsu, Y., et al.
Published: (2008)
Experimental Investigation on Microstructure and Mechanical Properties of Direct Squeeze Cast Al–13%Si Alloy
by: Souissi, S., et al.
Published: (2012)
by: Souissi, S., et al.
Published: (2012)
Effect of Grinding Parameters on the Surface Quality of Cutting Tools Made of High-Speed Low-Alloy Steels
by: Jaworski, J., et al.
Published: (2016)
by: Jaworski, J., et al.
Published: (2016)
Similar Items
-
External Stress Effect on Microstructure and Transformation Plasticity of Hot Work Tool Steel during Quenching
by: Janutienë, R.K., et al.
Published: (2015) -
Assessment of the Low-Cycle Strain-Induced Martensite Transformation in AISI 316 Stainless Steel by Magnetic and Acoustic Nondestructive Methods
by: Kim, C.S.
Published: (2018) -
Deformability Behavior of St3 Steel Used in the Profiles of High-Voltage Poles
by: Jutas, A., et al.
Published: (2018) -
Localization of plastic deformation and fracture in aluminum polycrystals
by: Zarikovskaya, N.V., et al.
Published: (2008) -
Compression Behavior of Biodegradable Thermoplastic Plasticizer-Containing Composites
by: Guo, A.F., et al.
Published: (2019)