Buchumschlag

Numerical Modeling and Mechanical Analysis of Combined Connection with Bolts and Welds

In this paper, a detailed finite element model of the combined connection with bolts and welds is created to analyze its failure mode and bearing capacity under shear load. The evaluation of work-together behavior of bolts and welds are focused on. С помощью программного комплекса ABAQUS выполнено к...

Ausführliche Beschreibung

Gespeichert in:

Bibliographische Detailangaben
Veröffentlicht in:	Проблемы прочности
Datum:	2016
Hauptverfasser:	Liu, M.S, Li, C.A., Huang, J.R., Ju, J.S.
Format:	Artikel
Sprache:	Englisch
Veröffentlicht:	Інститут проблем міцності ім. Г.С. Писаренко НАН України 2016
Schlagworte:	Научно-технический раздел
Online Zugang:	https://nasplib.isofts.kiev.ua/handle/123456789/173563
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:	Digital Library of Periodicals of National Academy of Sciences of Ukraine
Zitieren:	Numerical Modeling and Mechanical Analysis of Combined Connection with Bolts and Welds / M.S. Liu, C.A. Li, J.R. Huang, J.S. Ju // Проблемы прочности. — 2016. — № 6. — С. 152-161. — Бібліогр.: 11 назв. — англ.

Institution

Digital Library of Periodicals of National Academy of Sciences of Ukraine

Ähnliche Einträge

Numerical Simulation of Flexible Riser under Torsion
von: Liu, M.S., et al.
Veröffentlicht: (2017)

Effect of Impact Load on Dynamic Buckling of Steel Lattice Arch
von: Liu, M.S., et al.
Veröffentlicht: (2017)

Experimental and Numerical Analysis of Normal and Lateral High-Velocity Impacts on Carbon Fiber-Reinforced Polymer Laminates
von: Huang, T., et al.
Veröffentlicht: (2016)

Study on the Cracking Mechanism of YQ450NQR1 High-Strength Weathering Steel
von: Qing, J.S., et al.
Veröffentlicht: (2018)

Experimental and Numerical Investigations of an Asymmetric Multi-bolted Connection Preloaded and Subjected to Monotonic Loads
von: R. Grzejda, et al.
Veröffentlicht: (2023)

Review of new formats for fracture mechanics parameters
von: Landes, J.D., et al.
Veröffentlicht: (2006)

Microstructure and Mechanical Properties of TiC Nanoparticle-Reinforced Iron-Matrix Composites
von: Kim, J.M., et al.
Veröffentlicht: (2014)

Electron Backscatter Diffraction Analysis of the Microstructure Fineness in Pure Copper under Torsional Deformation
von: Wang, C.P., et al.
Veröffentlicht: (2018)

Experimental and Numerical Analysis of Springback Behavior of Aluminum Alloys
von: Slota, J., et al.
Veröffentlicht: (2017)

Microstructure and Mechanical Properties of an Underwater Wet Welded Dissimilar Ferritic/Austenitic Steel Joint
von: Guo, N., et al.
Veröffentlicht: (2015)

Comparison of fatigue criteria for combined bending-torsion loading of nitrided and virgin specimens
von: Major, S., et al.
Veröffentlicht: (2008)

Study on the Failure Mechanism of the Polymorphic Mixture for Remanifactured Machinery Parts
von: Liu, C.H., et al.
Veröffentlicht: (2018)

Real-Time Substructure Tests and Numerical Simulation of Mechanical Characteristics of Natural Rubber-Laminated Bearings
von: Peng, T.B., et al.
Veröffentlicht: (2018)

Review: Progress in the Studies on Mechanical Properties of Materials
von: Tu, M.Y., et al.
Veröffentlicht: (2014)

Review: Progress in the Studies on Mechanical Properties of Materials
von: Tu, M.Y., et al.
Veröffentlicht: (2014)

Experimental and Numerical Analysis of the Edge Effect for Corrugated and Honeycomb Fiberboard
von: Hua, G.J., et al.
Veröffentlicht: (2017)

Numerical Simulation of Rotary Compression Process of Hollow Balls
von: Skrochocki, D., et al.
Veröffentlicht: (2016)

Effect of Preliminary Torsional Strain on Low-Cycle Fatigue of Q345B Structural Steel
von: Hu, X.L., et al.
Veröffentlicht: (2019)

Mechanical Behavior of the Weld Joints of Thick Steel Plates Produced by Various Welding Processes
von: Bang, HanSur, et al.
Veröffentlicht: (2015)

Experimental and Numerical Simulation of the Microcrack Coalescence Mechanism in Rock-Like Material
von: Haeri, H., et al.
Veröffentlicht: (2015)

Mechanical Properties of Dissimilar A356/SAPH440 Lap Joints by the Friction Stir Spot Welding and Self-Piercing Riveting
von: Bang, Han Sur, et al.
Veröffentlicht: (2018)

Numerical Simulation of Steel Target Penetration by Shaped Charge Distended Jet with a High-Polymer Liner
von: Yi, J.Y., et al.
Veröffentlicht: (2017)

Discrepancy Analysis of Load–Displacement in the Combination Space for Concrete Box Girder Assessment
von: Ye, X.F., et al.
Veröffentlicht: (2018)

A Numerical Study of the Flexural Behavior of Concrete Beams Reinforced with AFRP Bars
von: Buyukkaragoz, A., et al.
Veröffentlicht: (2013)

Study on High-Strength Ring Chain Dynamic Characteristics under Different Launch Parameters
von: Zhang, Q., et al.
Veröffentlicht: (2018)

Improved Dynamic Mechanical Properties of Modified PTFE Jet Penetrating Charge with Shell
von: Chang, B.H., et al.
Veröffentlicht: (2016)

Effect of Tungsten-Inert-Gas Preheating on Mechanical and Microstructure Properties of Friction Stir Welded Dissimilar Al Alloy and Mild Steel
von: Bang, HanSur, et al.
Veröffentlicht: (2016)

Numerical Simulation of the Damage Behavior of a Concrete Beam with an Anisotropic Damage Model
von: Long, Y.C., et al.
Veröffentlicht: (2018)

High-Cycle Fatigue Properties and Damage Mechanism of Q345B Structural Steel
von: Hu, X.L., et al.
Veröffentlicht: (2017)

Mechanical properties and fracture behavior of high-strength steels
von: Musalek, R., et al.
Veröffentlicht: (2008)

Mechanical Properties and Machinability of Glass Fiber-Reinforced Polyetheretherketone
von: Ji, S.J., et al.
Veröffentlicht: (2015)

Three-Dimensional Finite Element Analysis of Tensile-Shear Spot-Welded Joints in Tensile and Compressive Loading Conditions
von: Adib, H., et al.
Veröffentlicht: (2004)

Design Optimization for Shear Key on the TF Coil Structure of the KSTAR Tokamak
von: Lee, D.S., et al.
Veröffentlicht: (2016)

Numerical Simulation of Fatigue Damage and Shape Instability Behavior of Steel 40Cr by the Damage-Coupled Crystal Plastic Model
von: Wu, G.C., et al.
Veröffentlicht: (2017)

Numerical simulation of elastic linear micropolar media based on the pore space length scale assumption
von: Jeong, J., et al.
Veröffentlicht: (2008)

Fatigue Life Prediction of Welded Box Structures
von: Zedira, H., et al.
Veröffentlicht: (2004)

Orthotropic Material and Anisotropic Damage Mechanics Approach for Numerically Seismic Assessment of Arch Dam-Reservoir-Foundation System
von: Hariri-Ardebili, M.A., et al.
Veröffentlicht: (2013)

Experimental and Numerical Studies on Buckling and Post-Buckling Behavior of Cylindrical Panels Subjected to Compressive Axial Load
von: Shariati, M., et al.
Veröffentlicht: (2011)

Simulation of the Mechanical Characteristics of a Granular Matter Tested under Biaxial Loading
von: Bi, Z.W., et al.
Veröffentlicht: (2015)

Numerical Simulation of the Inlet/Outlet Pressure Ratio Effect on the Heat Transfer Coefficient in an Air Turbine Cascade
von: He, Z., et al.
Veröffentlicht: (2019)