Study of Mechanical Degradation of 9Cr-1Mo-V-Nb Steel under Creep-Fatigue Interaction Conditions
Creep-fatigue tests of 9Cr-1Mo-V-Nb steel have been conducted under load control with further study of the steel mechanical degradation via microscopic observation, static-mechanical analysis and ultrasonic evaluation. The tempered specimens exhibited a tempered martensitic structure with a high dis...
Saved in:
| Published in: | Проблемы прочности |
|---|---|
| Date: | 2017 |
| Main Author: | Kim, C.S. |
| Format: | Article |
| Language: | English |
| Published: |
Інститут проблем міцності ім. Г.С. Писаренко НАН України
2017
|
| Subjects: | |
| Online Access: | https://nasplib.isofts.kiev.ua/handle/123456789/173577 |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Journal Title: | Digital Library of Periodicals of National Academy of Sciences of Ukraine |
| Cite this: | Study of Mechanical Degradation of 9Cr-1Mo-V-Nb Steel under Creep-Fatigue Interaction Conditions / C.S. Kim // Проблемы прочности. — 2017. — № 1. — С. 7-14. — Бібліогр.: 15 назв. — англ. |
Institution
Digital Library of Periodicals of National Academy of Sciences of UkraineSimilar Items
Acoustic emission investigation of crack propagation in Cr-Mo-V steels of different degradation degrees
by: Назарчук, З. Т., et al.
Published: (2016)
by: Назарчук, З. Т., et al.
Published: (2016)
Acoustic emission investigation of crack propagation in Cr-Mo-V steels of different degradation degrees
by: Z. T. Nazarchuk, et al.
Published: (2012)
by: Z. T. Nazarchuk, et al.
Published: (2012)
Acoustic emission investigation of crack propagation in Cr-Mo-V steels of different degradation degrees
by: Назарчук, З. Т., et al.
Published: (2016)
by: Назарчук, З. Т., et al.
Published: (2016)
Isothermal Fatigue and Creep-Fatigue Interaction Behavior of Nickel-Base Directionally Solidified Superalloy
by: Haq, A.U., et al.
Published: (2018)
by: Haq, A.U., et al.
Published: (2018)
Contact fatigue strength of 41CrAlMo7 grade steel by nitriding and shot-peening treatment
by: Nakonieczny, A., et al.
Published: (2012)
by: Nakonieczny, A., et al.
Published: (2012)
Contact fatigue strength of 41CrAlMo7 grade steel by nitriding and shot-peening treatment
by: A. Nakonieczny, et al.
Published: (2012)
by: A. Nakonieczny, et al.
Published: (2012)
Assessment of the Low-Cycle Strain-Induced Martensite Transformation in AISI 316 Stainless Steel by Magnetic and Acoustic Nondestructive Methods
by: Kim, C.S.
Published: (2018)
by: Kim, C.S.
Published: (2018)
Aspects of structural degradation in old bridge steels by means of fatigue crack propagation
by: Lesiuk, G., et al.
Published: (2011)
by: Lesiuk, G., et al.
Published: (2011)
Aspects of structural degradation in old bridge steels by means of fatigue crack propagation
by: G. Lesiuk, et al.
Published: (2011)
by: G. Lesiuk, et al.
Published: (2011)
Моделювання високоентропійних стопів систем W–Nb–Mo–Ta–V та W–Nb–Mo–Ta
by: Мельник, О.Б.
Published: (2014)
by: Мельник, О.Б.
Published: (2014)
Modelling of high-entropy alloys of the W–Nb–Mo–Ta–V and W–Nb–Mo–Ta systems
by: O. B. Melnyk
Published: (2014)
by: O. B. Melnyk
Published: (2014)
Structure and properties of Fe-B-C powders alloyed with Cr, V, Mo or Nb for plasma-sprayed coatings
by: Sukhova, O.V.
Published: (2020)
by: Sukhova, O.V.
Published: (2020)
Структура сплавів системи Nb-Mo-B в області Nb-NbB-MoB-Mo
by: Потажевська, О.А., et al.
Published: (2012)
by: Потажевська, О.А., et al.
Published: (2012)
Structure and mechanical properties of Al-Fe-Cr alloys for elevated temperatures, reinforced by nanoquasicrystalline particles additionally alloyed by Ti, Mo and Nb
by: Ju. V. Milman, et al.
Published: (2014)
by: Ju. V. Milman, et al.
Published: (2014)
Assessment of degradation of the steel of pipelines by their structural, mechanical and electromechanical characteristics
by: O. P. Ostash, et al.
Published: (2010)
by: O. P. Ostash, et al.
Published: (2010)
Properties of 15Cr12WNiMoV steel after vacuum activated chromium plating of its surface
by: Rudenky, S.G., et al.
Published: (2021)
by: Rudenky, S.G., et al.
Published: (2021)
Influence of tempering modes on fine structure parameters, stress and hardness of 25Cr2Mo1V steel
by: S. V. Bobyr, et al.
Published: (2019)
by: S. V. Bobyr, et al.
Published: (2019)
Ranking of mechanical characteristics of HPP pipeline steels by their sensitivity to operational degradation
by: O. Z. Student, et al.
Published: (2021)
by: O. Z. Student, et al.
Published: (2021)
The evaluation of operational degradation of gas pipeline steels by the mechanical stability criterion
by: Yu. Ya. Mieshkov, et al.
Published: (2014)
by: Yu. Ya. Mieshkov, et al.
Published: (2014)
Effect of Cyclic Stresses below the Endurance Limit on the Fatigue Life of 40Cr Steel
by: Zhao, L.H., et al.
Published: (2018)
by: Zhao, L.H., et al.
Published: (2018)
ОСОБЛИВОСТІ ВИПЛАВКИ БАГАТОКОМПОНЕНТНИХ НІОБІЄВИХ СПЛАВІВ СИСТЕМИ Nb–Ti–Al, ЛЕГОВАНИХ Cr, Zr, Mo, Si
by: Кузнєцова, Т. Л., et al.
Published: (2018)
by: Кузнєцова, Т. Л., et al.
Published: (2018)
Increase of manufasturability of perspective multicomponent alloys of system Nb−Ti−Al, alloyed Cr, Zr, Mo, Si
by: T. L. Kuznetsova, et al.
Published: (2018)
by: T. L. Kuznetsova, et al.
Published: (2018)
Application of hydrogen embritlement models to the blister growth behavior in 12Cr2MoNbVB steel and α -Fe exposed to low-energy D plasma
by: Nikitin, A.V., et al.
Published: (2017)
by: Nikitin, A.V., et al.
Published: (2017)
The influence of thermal treatment on microstructure and mechanical properties of Ti–Nb–Mo titanium alloys
by: O. M. Myslyvchenko, et al.
Published: (2020)
by: O. M. Myslyvchenko, et al.
Published: (2020)
The influence of hydrogen on the creep-fatigue crack initiation in plates near stress concentrators
by: Ye. Andreikiv, et al.
Published: (2014)
by: Ye. Andreikiv, et al.
Published: (2014)
Determination of period of subcritical creep-fatigue cracks growth under block loading
by: Ye. Andreikiv, et al.
Published: (2015)
by: Ye. Andreikiv, et al.
Published: (2015)
Chitosan immobilized on saponite surface in extraction of V(V), Mo(VI), and Cr(VI) oxoanions
by: T. M. Budnyak, et al.
Published: (2014)
by: T. M. Budnyak, et al.
Published: (2014)
Static crack growth resistance of 20 and 30CrMo steels in NACE solution
by: M. R. Chuchman
Published: (2016)
by: M. R. Chuchman
Published: (2016)
Features of Smelting of Multicomponent Niobium Alloys of a System Nb–Ti–Al Doped with Cr, Zr, Mo, Si
by: T. L. Kuznetsova, et al.
Published: (2018)
by: T. L. Kuznetsova, et al.
Published: (2018)
Effect of hydrogenation on creep and structure evolution of nanocrystalline Zr1Nb alloy
by: Savchuk, E.S., et al.
Published: (2023)
by: Savchuk, E.S., et al.
Published: (2023)
Method of laboratory degradation of structural steels
by: O. T. Tsyrulnyk, et al.
Published: (2017)
by: O. T. Tsyrulnyk, et al.
Published: (2017)
Mechanical properties of the GX12CrMoVNbN91 (GP91) cast steel after different heat treatments
by: Golański, G.
Published: (2012)
by: Golański, G.
Published: (2012)
Numerical Simulation of Fatigue Damage and Shape Instability Behavior of Steel 40Cr by the Damage-Coupled Crystal Plastic Model
by: Wu, G.C., et al.
Published: (2017)
by: Wu, G.C., et al.
Published: (2017)
Mechanical and fatigue properties of CFRP plate reinforced steel structural interface
by: Hua Zhu
Published: (2018)
by: Hua Zhu
Published: (2018)
Estimation of the periods of creep-fatigue crack initiation and growth in thin-walled structural elements
by: Ye. Andreikiv, et al.
Published: (2011)
by: Ye. Andreikiv, et al.
Published: (2011)
О температурной зависимости удельного сопротивления сплавов Mo-Re, Mo-Re-Nb
by: Игнатьева, Т.А., et al.
Published: (2004)
by: Игнатьева, Т.А., et al.
Published: (2004)
Determination of the required ratio of the components of charge materials for the smelting of alloy steel 35CrMo
by: K. O. Kostyk, et al.
Published: (2022)
by: K. O. Kostyk, et al.
Published: (2022)
Capacity of Cr-mo-steels constrictions of the stote-worm-pipes for catalyst reforming and hydrofining unit
by: S. Z. Stasjuk
Published: (2009)
by: S. Z. Stasjuk
Published: (2009)
ПІДВИЩЕННЯ ТЕХНОЛОГІЧНОСТІ ПЕРСПЕКТИВНИХ БАГАТОКОМПОНЕНТ- НИХ СПЛАВІВ СИСТЕМИ Nb−Ti−Аl, ЛЕГОВАНИХ Cr, Zr, Mo, Si
by: Кузнєцова, Т. Л., et al.
Published: (2018)
by: Кузнєцова, Т. Л., et al.
Published: (2018)
Producing ingots of Ti–28Al–7Nb–2Mo–2Cr titanium aluminide by electron beam melting
by: S. V. Akhonin, et al.
Published: (2022)
by: S. V. Akhonin, et al.
Published: (2022)
Similar Items
-
Acoustic emission investigation of crack propagation in Cr-Mo-V steels of different degradation degrees
by: Назарчук, З. Т., et al.
Published: (2016) -
Acoustic emission investigation of crack propagation in Cr-Mo-V steels of different degradation degrees
by: Z. T. Nazarchuk, et al.
Published: (2012) -
Acoustic emission investigation of crack propagation in Cr-Mo-V steels of different degradation degrees
by: Назарчук, З. Т., et al.
Published: (2016) -
Isothermal Fatigue and Creep-Fatigue Interaction Behavior of Nickel-Base Directionally Solidified Superalloy
by: Haq, A.U., et al.
Published: (2018) -
Contact fatigue strength of 41CrAlMo7 grade steel by nitriding and shot-peening treatment
by: Nakonieczny, A., et al.
Published: (2012)