Effect of Impact Load on Dynamic Buckling of Steel Lattice Arch
In this study, test results and numerical simulation data are jointly analyzed to investigate the dynamic buckling of the steel arch under impact load. A series of impact tests of the triangular lattice steel arch are conducted to study the effect of the impact velocity and rise-to-span ratio on the...
Gespeichert in:
| Veröffentlicht in: | Проблемы прочности |
|---|---|
| Datum: | 2017 |
| Hauptverfasser: | Liu, M.S., Li, J.Y., Tian, Z.X., Zhu, C.W., Ju, J.S. |
| Format: | Artikel |
| Sprache: | Englisch |
| Veröffentlicht: |
Інститут проблем міцності ім. Г.С. Писаренко НАН України
2017
|
| Schlagworte: | |
| Online Zugang: | https://nasplib.isofts.kiev.ua/handle/123456789/173582 |
| Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
| Назва журналу: | Digital Library of Periodicals of National Academy of Sciences of Ukraine |
| Zitieren: | Effect of Impact Load on Dynamic Buckling of Steel Lattice Arch / M.S. Liu, J.Y. Li, Z.X. Tian, C.W. Zhu, J.S. Ju // Проблемы прочности. — 2017. — № 1. — С. 54-65. — Бібліогр.: 14 назв. — англ. |
Institution
Digital Library of Periodicals of National Academy of Sciences of UkraineÄhnliche Einträge
Numerical Simulation of Flexible Riser under Torsion
von: Liu, M.S., et al.
Veröffentlicht: (2017)
von: Liu, M.S., et al.
Veröffentlicht: (2017)
Experimental and Numerical Studies on Buckling and Post-Buckling Behavior of Cylindrical Panels Subjected to Compressive Axial Load
von: Shariati, M., et al.
Veröffentlicht: (2011)
von: Shariati, M., et al.
Veröffentlicht: (2011)
Lateral Torsional Buckling Response of Steel Beam with Different Boundary Conditions and Loading
von: L. Dahmani, et al.
Veröffentlicht: (2014)
von: L. Dahmani, et al.
Veröffentlicht: (2014)
Lateral Torsional Buckling Response of Steel Beam with Different Boundary Conditions and Loading
von: Dahmani, L., et al.
Veröffentlicht: (2014)
von: Dahmani, L., et al.
Veröffentlicht: (2014)
Calculation of the γ-TiAl Lattice Resistance
von: Feng, R.C., et al.
Veröffentlicht: (2019)
von: Feng, R.C., et al.
Veröffentlicht: (2019)
Coupled Deformation and Diffusion Process at the Stainless Steel/Carbon Steel Interface in the Deformation Bonding Process
von: Li, S., et al.
Veröffentlicht: (2018)
von: Li, S., et al.
Veröffentlicht: (2018)
Lateral Torsional Buckling of an Eccentrically Loaded Channel Section Beam
von: Dahmani, L., et al.
Veröffentlicht: (2015)
von: Dahmani, L., et al.
Veröffentlicht: (2015)
Compressive Properties of SiC Particle-Reinforced Aluminum Matrix Composites under Repeated Impact Loading
von: Cao, D.F., et al.
Veröffentlicht: (2015)
von: Cao, D.F., et al.
Veröffentlicht: (2015)
Elastoplastic Damage Model for Concrete under Triaxial Compression and Reversed Cyclic Loading
von: Zhang, J., et al.
Veröffentlicht: (2018)
von: Zhang, J., et al.
Veröffentlicht: (2018)
Static Buckling of a Pre-loaded Complex Nano-composite Shell
von: K. V. Avramov, et al.
Veröffentlicht: (2021)
von: K. V. Avramov, et al.
Veröffentlicht: (2021)
Static Buckling of a Pre-loaded Complex Nano-composite Shell
von: Аврамов, К. В., et al.
Veröffentlicht: (2021)
von: Аврамов, К. В., et al.
Veröffentlicht: (2021)
Static Buckling of a Pre-loaded Complex Nano-composite Shell
von: Аврамов, К. В., et al.
Veröffentlicht: (2021)
von: Аврамов, К. В., et al.
Veröffentlicht: (2021)
Discrepancy Analysis of Load–Displacement in the Combination Space for Concrete Box Girder Assessment
von: Ye, X.F., et al.
Veröffentlicht: (2018)
von: Ye, X.F., et al.
Veröffentlicht: (2018)
Static and Dynamic Buckling of Rectangular Functionally Graded Plates Subjected to Thermal Loading
von: L. Czechowski, et al.
Veröffentlicht: (2013)
von: L. Czechowski, et al.
Veröffentlicht: (2013)
Static and Dynamic Buckling of Rectangular Functionally Graded Plates Subjected to Thermal Loading
von: Czechowski, L., et al.
Veröffentlicht: (2013)
von: Czechowski, L., et al.
Veröffentlicht: (2013)
Numerical Modeling and Mechanical Analysis of Combined Connection with Bolts and Welds
von: Liu, M.S, et al.
Veröffentlicht: (2016)
von: Liu, M.S, et al.
Veröffentlicht: (2016)
Study of steel arch support designs in the Kryvbas iron-ore fiel
von: V. V. Khvorost, et al.
Veröffentlicht: (2015)
von: V. V. Khvorost, et al.
Veröffentlicht: (2015)
Study on the Cracking Mechanism of YQ450NQR1 High-Strength Weathering Steel
von: Qing, J.S., et al.
Veröffentlicht: (2018)
von: Qing, J.S., et al.
Veröffentlicht: (2018)
Synergistic therapeutic effect of arsenic trioxide and radiotherapy in BALB/C nude mice bearing nasopharyngeal carcinoma xenografts
von: Xie, L.X., et al.
Veröffentlicht: (2007)
von: Xie, L.X., et al.
Veröffentlicht: (2007)
Buckling Analysis of Steel Semi-Spherical Shells with Square Cutout under Axial Compression
von: H. Torabi, et al.
Veröffentlicht: (2014)
von: H. Torabi, et al.
Veröffentlicht: (2014)
Buckling Analysis of Steel Semi-Spherical Shells with Square Cutout under Axial Compression
von: Torabi, H., et al.
Veröffentlicht: (2014)
von: Torabi, H., et al.
Veröffentlicht: (2014)
Response of an Indented Square Tube under Impact Loading
von: Tan, Z.H., et al.
Veröffentlicht: (2015)
von: Tan, Z.H., et al.
Veröffentlicht: (2015)
Additional loads on tunnel arch supports under the action of overhead monorail in the Western Donbas mines
von: V. O. Rastsvietaiev
Veröffentlicht: (2014)
von: V. O. Rastsvietaiev
Veröffentlicht: (2014)
On One of Varieties of Scythian Period Buckles
von: O. D. Mohylov
Veröffentlicht: (2016)
von: O. D. Mohylov
Veröffentlicht: (2016)
Smooth Particle Hydrodynamics-Based Characteristics of a Shaped Jet from Different Materials
von: Yin, J.P., et al.
Veröffentlicht: (2019)
von: Yin, J.P., et al.
Veröffentlicht: (2019)
End effect and near-surface buckling in a laminate composite material compres sed by a surface load
von: V. M. Bystrov
Veröffentlicht: (2019)
von: V. M. Bystrov
Veröffentlicht: (2019)
Improvement technological and ecological characteristics to welding of carbonaceous steels in inert gases at the expense of arch activation
von: A. M. Savitskij, et al.
Veröffentlicht: (2011)
von: A. M. Savitskij, et al.
Veröffentlicht: (2011)
Improvement technological and ecological characteristics to welding of carbonaceous steels in inert gases at the expense of arch activation
von: Савицкий, А. М., et al.
Veröffentlicht: (2016)
von: Савицкий, А. М., et al.
Veröffentlicht: (2016)
Improvement technological and ecological characteristics to welding of carbonaceous steels in inert gases at the expense of arch activation
von: Савицкий, А. М., et al.
Veröffentlicht: (2016)
von: Савицкий, А. М., et al.
Veröffentlicht: (2016)
Effect of Braiding Angle on the Impact and Post-Impact Behavior of 3D Braided Composites
von: Yan, S., et al.
Veröffentlicht: (2017)
von: Yan, S., et al.
Veröffentlicht: (2017)
Experimental Study and Finite Element Analysis of Critical Stresses of Reinforced Thermoplastic Pipes under Various Loads
von: Li, G.H., et al.
Veröffentlicht: (2016)
von: Li, G.H., et al.
Veröffentlicht: (2016)
Residual Strains of Filter Materials Reinforced with Grid Inclusions under Cyclic Loading
von: Lin, Y.L., et al.
Veröffentlicht: (2015)
von: Lin, Y.L., et al.
Veröffentlicht: (2015)
Strength Degradation of Glass Fiber Reinforced Polymer Bars Subjected to Reversed Cyclic Load
von: Lee, J.Y., et al.
Veröffentlicht: (2014)
von: Lee, J.Y., et al.
Veröffentlicht: (2014)
Effect of Preliminary Torsional Strain on Low-Cycle Fatigue of Q345B Structural Steel
von: Hu, X.L., et al.
Veröffentlicht: (2019)
von: Hu, X.L., et al.
Veröffentlicht: (2019)
A modified Poisson-Boltzmann approach to homogeneous ionic solutions
von: Outhwaite, C.W.
Veröffentlicht: (2004)
von: Outhwaite, C.W.
Veröffentlicht: (2004)
Safe usage of the arch yielding support joint clamps
von: Ju. M. Khalimendik, et al.
Veröffentlicht: (2016)
von: Ju. M. Khalimendik, et al.
Veröffentlicht: (2016)
Nearsurface buckling in laminate composite material with imperfect interlayer contact
von: V. M. Bystrov, et al.
Veröffentlicht: (2022)
von: V. M. Bystrov, et al.
Veröffentlicht: (2022)
Computing Special L-Values of Certain Modular Forms with Complex Multiplication
von: Li, W.-C.W., et al.
Veröffentlicht: (2018)
von: Li, W.-C.W., et al.
Veröffentlicht: (2018)
Pulse Current Treatment Effect on the Strength of Reinforcing Steel and Its Weld Joint under Impact Loading
von: Kruszka, L., et al.
Veröffentlicht: (2009)
von: Kruszka, L., et al.
Veröffentlicht: (2009)
Compression Behavior of Biodegradable Thermoplastic Plasticizer-Containing Composites
von: Guo, A.F., et al.
Veröffentlicht: (2019)
von: Guo, A.F., et al.
Veröffentlicht: (2019)
Ähnliche Einträge
-
Numerical Simulation of Flexible Riser under Torsion
von: Liu, M.S., et al.
Veröffentlicht: (2017) -
Experimental and Numerical Studies on Buckling and Post-Buckling Behavior of Cylindrical Panels Subjected to Compressive Axial Load
von: Shariati, M., et al.
Veröffentlicht: (2011) -
Lateral Torsional Buckling Response of Steel Beam with Different Boundary Conditions and Loading
von: L. Dahmani, et al.
Veröffentlicht: (2014) -
Lateral Torsional Buckling Response of Steel Beam with Different Boundary Conditions and Loading
von: Dahmani, L., et al.
Veröffentlicht: (2014) -
Calculation of the γ-TiAl Lattice Resistance
von: Feng, R.C., et al.
Veröffentlicht: (2019)