Effect of the Microcrack Inclination Angle on Crack Propagation Behavior of TiAl Alloy
Molecular dynamics simulation was employed to make the model of crack propagation for singlecrystal y-TiAl alloy. The effects of the angle between a microcrack and loading direction on crack propagation were studied through the analysis of the atomic configurations and stress—strain curves in the pa...
Gespeichert in:
| Veröffentlicht in: | Проблемы прочности |
|---|---|
| Datum: | 2017 |
| Hauptverfasser: | Feng, R.C., Lu, J.T., Li, H.Y., Cao, H., Rui, Z.Y. |
| Format: | Artikel |
| Sprache: | Englisch |
| Veröffentlicht: |
Інститут проблем міцності ім. Г.С. Писаренко НАН України
2017
|
| Schlagworte: | |
| Online Zugang: | https://nasplib.isofts.kiev.ua/handle/123456789/173586 |
| Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
| Назва журналу: | Digital Library of Periodicals of National Academy of Sciences of Ukraine |
| Zitieren: | Effect of the Microcrack Inclination Angle on Crack Propagation Behavior of TiAl Alloy / R.C. Feng, J.T. Lu, H.Y. Li, H. Cao, Z.Y. Rui // Проблемы прочности. — 2017. — № 1. — С. 87-94. — Бібліогр.: 25 назв. — англ. |
Institution
Digital Library of Periodicals of National Academy of Sciences of UkraineÄhnliche Einträge
Influence of Temperature on Fatigue Crack Propagation in TiAl Alloys
von: Feng, R.C., et al.
Veröffentlicht: (2014)
von: Feng, R.C., et al.
Veröffentlicht: (2014)
Influence of Temperature on Fatigue Crack Propagation in TiAl Alloys
von: R. C. Feng, et al.
Veröffentlicht: (2014)
von: R. C. Feng, et al.
Veröffentlicht: (2014)
Calculation of the γ-TiAl Lattice Resistance
von: Feng, R.C., et al.
Veröffentlicht: (2019)
von: Feng, R.C., et al.
Veröffentlicht: (2019)
Improved Method of Fatigue Life Assessment for TiAl Alloys
von: Feng, R.C., et al.
Veröffentlicht: (2014)
von: Feng, R.C., et al.
Veröffentlicht: (2014)
Mechanical Properties of Thermoplastic Variable-Angle Composite Laminations for Conical Shells
von: Han, Z.Y., et al.
Veröffentlicht: (2014)
von: Han, Z.Y., et al.
Veröffentlicht: (2014)
Determination of the limiting angle of inclination of tubular belt conveyor
von: R. Kiriia, et al.
Veröffentlicht: (2020)
von: R. Kiriia, et al.
Veröffentlicht: (2020)
Determining of limiting angle of inclination of belt conveyor with partitions
von: R. V. Kiriia, et al.
Veröffentlicht: (2021)
von: R. V. Kiriia, et al.
Veröffentlicht: (2021)
Determining limiting angle of inclination of tubular belt conveyor
von: R. V. Kirija, et al.
Veröffentlicht: (2019)
von: R. V. Kirija, et al.
Veröffentlicht: (2019)
Dislocation mechanisms of microcracking. A review
von: V. R. Skalskyi, et al.
Veröffentlicht: (2012)
von: V. R. Skalskyi, et al.
Veröffentlicht: (2012)
Numerical Study of Failure Modes and Crack Propagation in 2A12 Aluminum Target against Blunt-Nosed Projectile at Low Yaw Angle
von: Deng, Y.F., et al.
Veröffentlicht: (2016)
von: Deng, Y.F., et al.
Veröffentlicht: (2016)
Improved Method of Fatigue Life Assessment for TiAl Alloys
von: R. C. Feng, et al.
Veröffentlicht: (2014)
von: R. C. Feng, et al.
Veröffentlicht: (2014)
Experimental acoustic-emission assessment of microcrack initiation
von: V. R. Skalskyi, et al.
Veröffentlicht: (2013)
von: V. R. Skalskyi, et al.
Veröffentlicht: (2013)
Edge Inclined Crack in Elastic Circular Disk
von: G. P. Marchenko, et al.
Veröffentlicht: (2024)
von: G. P. Marchenko, et al.
Veröffentlicht: (2024)
Oxidation behavior and electrochemical corrosion performance of Ti₃Al alloy with TiAl coating
von: Yanjun Xi, et al.
Veröffentlicht: (2010)
von: Yanjun Xi, et al.
Veröffentlicht: (2010)
Effect of Braiding Angle on the Impact and Post-Impact Behavior of 3D Braided Composites
von: Yan, S., et al.
Veröffentlicht: (2017)
von: Yan, S., et al.
Veröffentlicht: (2017)
Energy of the elastic solid deformation with a microcrack under pressure
von: M. H. Stashchuk, et al.
Veröffentlicht: (2016)
von: M. H. Stashchuk, et al.
Veröffentlicht: (2016)
Experimental and Numerical Simulation of the Microcrack Coalescence Mechanism in Rock-Like Material
von: Haeri, H., et al.
Veröffentlicht: (2015)
von: Haeri, H., et al.
Veröffentlicht: (2015)
Estimation of the initiation period of fatigue microcrack at the axle bearing race
von: V. R. Skalskyi, et al.
Veröffentlicht: (2015)
von: V. R. Skalskyi, et al.
Veröffentlicht: (2015)
Influence of RRA treatment on microstructure and stress corrosion cracking behavior of spray formed 7075 alloy
von: Rui-Ming Su, et al.
Veröffentlicht: (2015)
von: Rui-Ming Su, et al.
Veröffentlicht: (2015)
Numerical Simulation of the Thermomechanical Behavior of a Hot Stamping Die
von: Jiang, Q.Y., et al.
Veröffentlicht: (2018)
von: Jiang, Q.Y., et al.
Veröffentlicht: (2018)
Mechanical Properties of Thermoplastic Variable-Angle Composite Laminations for Conical Shells
von: Z. Y. Han, et al.
Veröffentlicht: (2014)
von: Z. Y. Han, et al.
Veröffentlicht: (2014)
Investigation on microstructure and oxidation behavior of Cr-modified aluminide coating on γ-TiAl alloys
von: Jafarian, H.R., et al.
Veröffentlicht: (2011)
von: Jafarian, H.R., et al.
Veröffentlicht: (2011)
Regularities of crack propagation in hybrid pumping rods
von: B. V. Kopei, et al.
Veröffentlicht: (2021)
von: B. V. Kopei, et al.
Veröffentlicht: (2021)
Behavior of Self-Compacting Concrete-Filled Steel Tube Columns with Inclined Stiffener Ribs under Axial Compression
von: Liang, W., et al.
Veröffentlicht: (2017)
von: Liang, W., et al.
Veröffentlicht: (2017)
Simulating the Crack Propagation Mechanism of Pre-Cracked Concrete Specimens under Shear Loading Conditions
von: Haeri, H.
Veröffentlicht: (2015)
von: Haeri, H.
Veröffentlicht: (2015)
Experimental investigation of the 2D diffractive optical element for speckle reduction efficiency dependence on its speed and inclination angle
von: Prygun, A. V., et al.
Veröffentlicht: (2015)
von: Prygun, A. V., et al.
Veröffentlicht: (2015)
Effect of continuity violation of material in the form of dispersed microcracks on electroelastic parameters of piezoceramics
von: D. V. Babich, et al.
Veröffentlicht: (2015)
von: D. V. Babich, et al.
Veröffentlicht: (2015)
On the Strength and Crack Propagation Process of the Pre-Cracked Rock-Like Specimens under Uniaxial Compression
von: Haeri, H., et al.
Veröffentlicht: (2014)
von: Haeri, H., et al.
Veröffentlicht: (2014)
Investigation and control of cracks propagation in boride coatings
von: S. M. Cherneha, et al.
Veröffentlicht: (2010)
von: S. M. Cherneha, et al.
Veröffentlicht: (2010)
A model of fatigue crack propagation in metals
von: Yakovleva, T.Yu., et al.
Veröffentlicht: (2009)
von: Yakovleva, T.Yu., et al.
Veröffentlicht: (2009)
Numerical Analysis of Crack Propagation Path Using an Advanced Element Cracking Method
von: Z. P. Zhong, et al.
Veröffentlicht: (2014)
von: Z. P. Zhong, et al.
Veröffentlicht: (2014)
Numerical Analysis of Crack Propagation Path Using an Advanced Element Cracking Method
von: Zhong, Z.P., et al.
Veröffentlicht: (2014)
von: Zhong, Z.P., et al.
Veröffentlicht: (2014)
Stacking Sequence Effect on the Fracture Behavior of Narrow L-Shaped Cross-Ply Laminates: Experimental Study
von: Pan, Z.Y., et al.
Veröffentlicht: (2018)
von: Pan, Z.Y., et al.
Veröffentlicht: (2018)
Angles of rotational transform behavior with plasma pressure variations in the torsatron
von: Kuznetsov, Yu.K., et al.
Veröffentlicht: (2002)
von: Kuznetsov, Yu.K., et al.
Veröffentlicht: (2002)
Comparative Analysis of Crack Resistance of Fiber Metal Laminates with HS2 Glass/T700 Carbon Layers for Various Stress Ratios
von: Song, X., et al.
Veröffentlicht: (2016)
von: Song, X., et al.
Veröffentlicht: (2016)
Optimization of a maneuver of a small change of an orbit inclination angle of the interorbital transport vehicle with a propulsion system of limited power and energy accumulator
von: Ja. V. Tkachenko, et al.
Veröffentlicht: (2020)
von: Ja. V. Tkachenko, et al.
Veröffentlicht: (2020)
Optimization of a maneuver of a small change of an orbit inclination angle of the interorbital transport vehicle with a propulsion system of limited power and energy accumulator
von: V. I. Gritsenko, et al.
Veröffentlicht: (2020)
von: V. I. Gritsenko, et al.
Veröffentlicht: (2020)
Geometry of highly inclined protoplanetary disks
von: Zakhozhay, O.V., et al.
Veröffentlicht: (2015)
von: Zakhozhay, O.V., et al.
Veröffentlicht: (2015)
The effect of compressing residual stresses on the propagation of shear surface cracks in railway rails
von: O. P. Datsyshyn, et al.
Veröffentlicht: (2015)
von: O. P. Datsyshyn, et al.
Veröffentlicht: (2015)
Vacuum Crack Growth Behavior of Austenitic Stainless Steel under Fatigue Loading
von: Takeda, T., et al.
Veröffentlicht: (2011)
von: Takeda, T., et al.
Veröffentlicht: (2011)
Ähnliche Einträge
-
Influence of Temperature on Fatigue Crack Propagation in TiAl Alloys
von: Feng, R.C., et al.
Veröffentlicht: (2014) -
Influence of Temperature on Fatigue Crack Propagation in TiAl Alloys
von: R. C. Feng, et al.
Veröffentlicht: (2014) -
Calculation of the γ-TiAl Lattice Resistance
von: Feng, R.C., et al.
Veröffentlicht: (2019) -
Improved Method of Fatigue Life Assessment for TiAl Alloys
von: Feng, R.C., et al.
Veröffentlicht: (2014) -
Mechanical Properties of Thermoplastic Variable-Angle Composite Laminations for Conical Shells
von: Han, Z.Y., et al.
Veröffentlicht: (2014)