Application of Stir Tool Force Measuring Dynamometer for Friction Stir Welding of Aluminum Alloys
In this study, a stir tool force measuring dynamometer was designed and manufactured to be suitable for use during the process of friction stir welding. The dynamometer meets the requirements needed for actual force measurements, with error percentage values in the x-, y-, and z-axis directions of 1...
Збережено в:
| Опубліковано в: : | Проблемы прочности |
|---|---|
| Дата: | 2017 |
| Автори: | , , , |
| Формат: | Стаття |
| Мова: | English |
| Опубліковано: |
Інститут проблем міцності ім. Г.С. Писаренко НАН України
2017
|
| Теми: | |
| Онлайн доступ: | https://nasplib.isofts.kiev.ua/handle/123456789/173596 |
| Теги: |
Додати тег
Немає тегів, Будьте першим, хто поставить тег для цього запису!
|
| Назва журналу: | Digital Library of Periodicals of National Academy of Sciences of Ukraine |
| Цитувати: | Application of Stir Tool Force Measuring Dynamometer for Friction Stir Welding of Aluminum Alloys / H.F. Wang, J.L. Wang, D.W. Zuo, W.W. Song // Проблемы прочности. — 2017. — № 1. — С. 181-189. — Бібліогр.: 12 назв. — англ. |
Репозитарії
Digital Library of Periodicals of National Academy of Sciences of Ukraine| id |
nasplib_isofts_kiev_ua-123456789-173596 |
|---|---|
| record_format |
dspace |
| spelling |
Wang, H.F. Wang, J.L. Zuo, D.W. Song, W.W. 2020-12-12T14:56:34Z 2020-12-12T14:56:34Z 2017 Application of Stir Tool Force Measuring Dynamometer for Friction Stir Welding of Aluminum Alloys / H.F. Wang, J.L. Wang, D.W. Zuo, W.W. Song // Проблемы прочности. — 2017. — № 1. — С. 181-189. — Бібліогр.: 12 назв. — англ. 0556-171X https://nasplib.isofts.kiev.ua/handle/123456789/173596 539.4 In this study, a stir tool force measuring dynamometer was designed and manufactured to be suitable for use during the process of friction stir welding. The dynamometer meets the requirements needed for actual force measurements, with error percentage values in the x-, y-, and z-axis directions of 1.1, I.3, and 1.2%, respectively, and a three-directional sensitivity range of 0.4-2.1%. At the same time, stir tool forces were measured under different process parameters using the manufactured dynamometer. The stir tool force mathematical model, to be used for friction stir welding processes, was established by function approximation and regression analysis methods. The model was set up with a significance level under 90%. Finally, a comparison between the model-calculated values and experimental values yielded a stir tool force average error of 10.4, 4.66,, and 7.11% in the x, y, and z axes direction, respectively. Therefore, calculated and experimental values are in agreement. This study is supported by the National Natural Science Foundation of China (Grantes Nos. 51175255 and 51305199); the Excellent young talents fund key project of the Anhui Higher Education Institutions of China (Grant No. 2013SQRL089ZD); and the Starting Foundation for Talents from Huangshan University of China (Grant No. 2013xkjq003). en Інститут проблем міцності ім. Г.С. Писаренко НАН України Проблемы прочности Научно-технический раздел Application of Stir Tool Force Measuring Dynamometer for Friction Stir Welding of Aluminum Alloys Применение динамометра к измерению усилия устройства перемешивания при сварке трением для алюминиевых сплавов Article published earlier |
| institution |
Digital Library of Periodicals of National Academy of Sciences of Ukraine |
| collection |
DSpace DC |
| title |
Application of Stir Tool Force Measuring Dynamometer for Friction Stir Welding of Aluminum Alloys |
| spellingShingle |
Application of Stir Tool Force Measuring Dynamometer for Friction Stir Welding of Aluminum Alloys Wang, H.F. Wang, J.L. Zuo, D.W. Song, W.W. Научно-технический раздел |
| title_short |
Application of Stir Tool Force Measuring Dynamometer for Friction Stir Welding of Aluminum Alloys |
| title_full |
Application of Stir Tool Force Measuring Dynamometer for Friction Stir Welding of Aluminum Alloys |
| title_fullStr |
Application of Stir Tool Force Measuring Dynamometer for Friction Stir Welding of Aluminum Alloys |
| title_full_unstemmed |
Application of Stir Tool Force Measuring Dynamometer for Friction Stir Welding of Aluminum Alloys |
| title_sort |
application of stir tool force measuring dynamometer for friction stir welding of aluminum alloys |
| author |
Wang, H.F. Wang, J.L. Zuo, D.W. Song, W.W. |
| author_facet |
Wang, H.F. Wang, J.L. Zuo, D.W. Song, W.W. |
| topic |
Научно-технический раздел |
| topic_facet |
Научно-технический раздел |
| publishDate |
2017 |
| language |
English |
| container_title |
Проблемы прочности |
| publisher |
Інститут проблем міцності ім. Г.С. Писаренко НАН України |
| format |
Article |
| title_alt |
Применение динамометра к измерению усилия устройства перемешивания при сварке трением для алюминиевых сплавов |
| description |
In this study, a stir tool force measuring dynamometer was designed and manufactured to be suitable for use during the process of friction stir welding. The dynamometer meets the requirements needed for actual force measurements, with error percentage values in the x-, y-, and z-axis directions of 1.1, I.3, and 1.2%, respectively, and a three-directional sensitivity range of 0.4-2.1%. At the same time, stir tool forces were measured under different process parameters using the manufactured dynamometer. The stir tool force mathematical model, to be used for friction stir welding processes, was established by function approximation and regression analysis methods. The model was set up with a significance level under 90%. Finally, a comparison between the model-calculated values and experimental values yielded a stir tool force average error of 10.4, 4.66,, and 7.11% in the x, y, and z axes direction, respectively. Therefore, calculated and experimental values are in agreement.
|
| issn |
0556-171X |
| url |
https://nasplib.isofts.kiev.ua/handle/123456789/173596 |
| citation_txt |
Application of Stir Tool Force Measuring Dynamometer for Friction Stir Welding of Aluminum Alloys / H.F. Wang, J.L. Wang, D.W. Zuo, W.W. Song // Проблемы прочности. — 2017. — № 1. — С. 181-189. — Бібліогр.: 12 назв. — англ. |
| work_keys_str_mv |
AT wanghf applicationofstirtoolforcemeasuringdynamometerforfrictionstirweldingofaluminumalloys AT wangjl applicationofstirtoolforcemeasuringdynamometerforfrictionstirweldingofaluminumalloys AT zuodw applicationofstirtoolforcemeasuringdynamometerforfrictionstirweldingofaluminumalloys AT songww applicationofstirtoolforcemeasuringdynamometerforfrictionstirweldingofaluminumalloys AT wanghf primeneniedinamometrakizmereniûusiliâustroistvaperemešivaniâprisvarketreniemdlâalûminievyhsplavov AT wangjl primeneniedinamometrakizmereniûusiliâustroistvaperemešivaniâprisvarketreniemdlâalûminievyhsplavov AT zuodw primeneniedinamometrakizmereniûusiliâustroistvaperemešivaniâprisvarketreniemdlâalûminievyhsplavov AT songww primeneniedinamometrakizmereniûusiliâustroistvaperemešivaniâprisvarketreniemdlâalûminievyhsplavov |
| first_indexed |
2025-12-07T19:37:06Z |
| last_indexed |
2025-12-07T19:37:06Z |
| _version_ |
1850879483586805760 |