Experimental and Numerical Analysis of the Edge Effect for Corrugated and Honeycomb Fiberboard
As the two typical structural paper packaging materials, corrugated fiberboard and honeycomb paperboard occupy an important position in the field of logistics packaging. Up to now, numerous studies were focused on the properties of the above sandwich paperboards. However, the issue of their edgewise...
Gespeichert in:
| Veröffentlicht in: | Проблемы прочности |
|---|---|
| Datum: | 2017 |
| Hauptverfasser: | Hua, G.J., Shen, Y., Zhao, D., Xie, Y. |
| Format: | Artikel |
| Sprache: | Englisch |
| Veröffentlicht: |
Інститут проблем міцності ім. Г.С. Писаренко НАН України
2017
|
| Schlagworte: | |
| Online Zugang: | https://nasplib.isofts.kiev.ua/handle/123456789/173599 |
| Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
| Назва журналу: | Digital Library of Periodicals of National Academy of Sciences of Ukraine |
| Zitieren: | Experimental and Numerical Analysis of the Edge Effect for Corrugated and Honeycomb Fiberboard / G.J. Hua, Y. Shen, D. Zhao, Y. Xie // Проблемы прочности. — 2017. — № 1. — С. 210-219. — Бібліогр.: 10 назв. — англ. |
Institution
Digital Library of Periodicals of National Academy of Sciences of UkraineÄhnliche Einträge
Experimental and Numerical Analysis of Springback Behavior of Aluminum Alloys
von: Slota, J., et al.
Veröffentlicht: (2017)
von: Slota, J., et al.
Veröffentlicht: (2017)
Study on Thermal Stress of Honeycomb Ceramic Regenerators with Different Parameters
von: Wang, Y.X., et al.
Veröffentlicht: (2014)
von: Wang, Y.X., et al.
Veröffentlicht: (2014)
Experimental and Numerical Analysis of Normal and Lateral High-Velocity Impacts on Carbon Fiber-Reinforced Polymer Laminates
von: Huang, T., et al.
Veröffentlicht: (2016)
von: Huang, T., et al.
Veröffentlicht: (2016)
Experimental Study on the Coaxing Effect of Multi-Level Stresses with Different Sequences
von: Zhao, L.H., et al.
Veröffentlicht: (2017)
von: Zhao, L.H., et al.
Veröffentlicht: (2017)
Experimental Study of Inconel 718 Surface Treatment by Edge Robotic Deburring with Force Control
von: Burghardt, A., et al.
Veröffentlicht: (2017)
von: Burghardt, A., et al.
Veröffentlicht: (2017)
Experimental and Numerical Analysis of the Shear Properties of Honeycomb Cores Produced Using Additive Technologies
von: Деревянко, И. И., et al.
Veröffentlicht: (2022)
von: Деревянко, И. И., et al.
Veröffentlicht: (2022)
Experimental and Numerical Analysis of the Shear Properties of Honeycomb Cores Produced Using Additive Technologies
von: Деревянко, И. И., et al.
Veröffentlicht: (2022)
von: Деревянко, И. И., et al.
Veröffentlicht: (2022)
Experimental and Numerical Analysis of the Shear Properties of Honeycomb Cores Produced Using Additive Technologies
von: I. I. Derevianko, et al.
Veröffentlicht: (2021)
von: I. I. Derevianko, et al.
Veröffentlicht: (2021)
Numerical Simulation of the Thermomechanical Behavior of a Hot Stamping Die
von: Jiang, Q.Y., et al.
Veröffentlicht: (2018)
von: Jiang, Q.Y., et al.
Veröffentlicht: (2018)
Numerical Simulation and Experimental Study on the Interface Bonding of Stainless Steel Clad Plate
von: Jin, H.R., et al.
Veröffentlicht: (2018)
von: Jin, H.R., et al.
Veröffentlicht: (2018)
Numerical Simulation-Based Optimization of Contact Stress Distribution and Lubrication Conditions in the Straight Worm Drive
von: He, Y., et al.
Veröffentlicht: (2018)
von: He, Y., et al.
Veröffentlicht: (2018)
Manufacturing Technology, Experimental and Numerical Analysis of Static Bending of Three-Layer Composite Plate with Honeycomb Structure
von: Деревянко, І. І., et al.
Veröffentlicht: (2025)
von: Деревянко, І. І., et al.
Veröffentlicht: (2025)
Manufacturing Technology, Experimental and Numerical Analysis of Static Bending of Three-Layer Composite Plate with Honeycomb Structure
von: Деревянко, І. І., et al.
Veröffentlicht: (2025)
von: Деревянко, І. І., et al.
Veröffentlicht: (2025)
Experimental and Numerical Simulation of the Microcrack Coalescence Mechanism in Rock-Like Material
von: Haeri, H., et al.
Veröffentlicht: (2015)
von: Haeri, H., et al.
Veröffentlicht: (2015)
Numerical and Experimental Analyses of Vibrations of Annular Plates with Multiple Eccentric Holes
von: Noga, S.
Veröffentlicht: (2016)
von: Noga, S.
Veröffentlicht: (2016)
Experimental-Numerical Study of Tensile Strength of the High-Strength Steel S690QL at Elevated Temperatures
von: Arsić, D., et al.
Veröffentlicht: (2016)
von: Arsić, D., et al.
Veröffentlicht: (2016)
Numerical Modeling and Mechanical Analysis of Combined Connection with Bolts and Welds
von: Liu, M.S, et al.
Veröffentlicht: (2016)
von: Liu, M.S, et al.
Veröffentlicht: (2016)
Numerical Simulation of the Inlet/Outlet Pressure Ratio Effect on the Heat Transfer Coefficient in an Air Turbine Cascade
von: He, Z., et al.
Veröffentlicht: (2019)
von: He, Z., et al.
Veröffentlicht: (2019)
Experimental and Numerical Studies on Buckling and Post-Buckling Behavior of Cylindrical Panels Subjected to Compressive Axial Load
von: Shariati, M., et al.
Veröffentlicht: (2011)
von: Shariati, M., et al.
Veröffentlicht: (2011)
Effect of the Interfacial Transition Zone on Basic Mechanical Properties of a Solid Composite Propellant
von: Shen, L.L., et al.
Veröffentlicht: (2018)
von: Shen, L.L., et al.
Veröffentlicht: (2018)
Numerical Simulation of Flexible Riser under Torsion
von: Liu, M.S., et al.
Veröffentlicht: (2017)
von: Liu, M.S., et al.
Veröffentlicht: (2017)
Comparative Analysis of Crack Resistance of Fiber Metal Laminates with HS2 Glass/T700 Carbon Layers for Various Stress Ratios
von: Song, X., et al.
Veröffentlicht: (2016)
von: Song, X., et al.
Veröffentlicht: (2016)
Effect of Grinding Conditions of a TC4 Titanium Alloy on Its Residual Surface Stresses
von: Li, J., et al.
Veröffentlicht: (2015)
von: Li, J., et al.
Veröffentlicht: (2015)
Dynamic Stress Analysis of a Composite Electromagnetic Track
von: Tian, Z.G., et al.
Veröffentlicht: (2018)
von: Tian, Z.G., et al.
Veröffentlicht: (2018)
Analysis and Experimental Study of Vibration System Characteristics of Ultrasonic Compound Electrical Machining
von: Deng, Z.Q., et al.
Veröffentlicht: (2017)
von: Deng, Z.Q., et al.
Veröffentlicht: (2017)
Effect of Braiding Angle on the Impact and Post-Impact Behavior of 3D Braided Composites
von: Yan, S., et al.
Veröffentlicht: (2017)
von: Yan, S., et al.
Veröffentlicht: (2017)
Stacking Sequence Effect on the Fracture Behavior of Narrow L-Shaped Cross-Ply Laminates: Experimental Study
von: Pan, Z.Y., et al.
Veröffentlicht: (2018)
von: Pan, Z.Y., et al.
Veröffentlicht: (2018)
Numerical simulation of brittle damage in concrete specimens
von: Labadi, Y., et al.
Veröffentlicht: (2005)
von: Labadi, Y., et al.
Veröffentlicht: (2005)
Fracture resistance of ceramics: edge fracture method
von: Gogotsi, G.A., et al.
Veröffentlicht: (2005)
von: Gogotsi, G.A., et al.
Veröffentlicht: (2005)
Numerical determination of free vibration frequencies of a corrugated open cylindrical shell
von: O. Y. Hryhorenko, et al.
Veröffentlicht: (2023)
von: O. Y. Hryhorenko, et al.
Veröffentlicht: (2023)
Experimental and Numerical Modeling of the Extrusion Process in 1050A Aluminum Alloy for Design of Impact Energy-Absorbing Devices
von: Ryzińska, G., et al.
Veröffentlicht: (2016)
von: Ryzińska, G., et al.
Veröffentlicht: (2016)
A Theoretical and Experimental Analysis of Rotary Compression of Hollow Forgings Formed Over a Mandrel
von: Tomczak, J., et al.
Veröffentlicht: (2017)
von: Tomczak, J., et al.
Veröffentlicht: (2017)
Numerical Simulation of Steel Target Penetration by Shaped Charge Distended Jet with a High-Polymer Liner
von: Yi, J.Y., et al.
Veröffentlicht: (2017)
von: Yi, J.Y., et al.
Veröffentlicht: (2017)
An Experimental Study of the Dynamic Split Tension Properties of Reinforced Concrete
von: Zhao, Z., et al.
Veröffentlicht: (2016)
von: Zhao, Z., et al.
Veröffentlicht: (2016)
Experimental Study and Finite Element Analysis of Critical Stresses of Reinforced Thermoplastic Pipes under Various Loads
von: Li, G.H., et al.
Veröffentlicht: (2016)
von: Li, G.H., et al.
Veröffentlicht: (2016)
Numerical Simulation of the Damage Behavior of a Concrete Beam with an Anisotropic Damage Model
von: Long, Y.C., et al.
Veröffentlicht: (2018)
von: Long, Y.C., et al.
Veröffentlicht: (2018)
Real-Time Substructure Tests and Numerical Simulation of Mechanical Characteristics of Natural Rubber-Laminated Bearings
von: Peng, T.B., et al.
Veröffentlicht: (2018)
von: Peng, T.B., et al.
Veröffentlicht: (2018)
Numerical Analysis of Crack Propagation Path Using an Advanced Element Cracking Method
von: Zhong, Z.P., et al.
Veröffentlicht: (2014)
von: Zhong, Z.P., et al.
Veröffentlicht: (2014)
Numerical Simulation of Rotary Compression Process of Hollow Balls
von: Skrochocki, D., et al.
Veröffentlicht: (2016)
von: Skrochocki, D., et al.
Veröffentlicht: (2016)
Effect of Cyclic Stresses below the Endurance Limit on the Fatigue Life of 40Cr Steel
von: Zhao, L.H., et al.
Veröffentlicht: (2018)
von: Zhao, L.H., et al.
Veröffentlicht: (2018)
Ähnliche Einträge
-
Experimental and Numerical Analysis of Springback Behavior of Aluminum Alloys
von: Slota, J., et al.
Veröffentlicht: (2017) -
Study on Thermal Stress of Honeycomb Ceramic Regenerators with Different Parameters
von: Wang, Y.X., et al.
Veröffentlicht: (2014) -
Experimental and Numerical Analysis of Normal and Lateral High-Velocity Impacts on Carbon Fiber-Reinforced Polymer Laminates
von: Huang, T., et al.
Veröffentlicht: (2016) -
Experimental Study on the Coaxing Effect of Multi-Level Stresses with Different Sequences
von: Zhao, L.H., et al.
Veröffentlicht: (2017) -
Experimental Study of Inconel 718 Surface Treatment by Edge Robotic Deburring with Force Control
von: Burghardt, A., et al.
Veröffentlicht: (2017)