Buchumschlag

Fatigue Assessment of Ti–6Al–4V Circular Notched Specimens Produced by Selective Laser Melting

This work is aimed to assess the fatigue strength of Ti–6Al–4V smooth and circular notched samples produced by selective laser melting (SLM). Scanning electron microscopy have been used to investigate the fracture surface of the broken samples in order to identify crack initiation points and fractur...

Ausführliche Beschreibung

Gespeichert in:

Bibliographische Detailangaben
Veröffentlicht in:	Проблемы прочности
Datum:	2017
Hauptverfasser:	Razavi, S.M.J., Ferro, P., Berto, F.
Format:	Artikel
Sprache:	Englisch
Veröffentlicht:	Інститут проблем міцності ім. Г.С. Писаренко НАН України 2017
Schlagworte:	Научно-технический раздел
Online Zugang:	https://nasplib.isofts.kiev.ua/handle/123456789/173676
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:	Digital Library of Periodicals of National Academy of Sciences of Ukraine
Zitieren:	Fatigue Assessment of Ti–6Al–4V Circular Notched Specimens Produced by Selective Laser Melting / S.M.J. Razavi, P. Ferro, F. Berto // Проблемы прочности. — 2017. — № 3. — С. 105-114. — Бібліогр.: 20 назв. — англ.

Institution

Digital Library of Periodicals of National Academy of Sciences of Ukraine

Ähnliche Einträge

Fatigue properties of notched specimens made of FeP04 steel
von: Rozumek, D., et al.
Veröffentlicht: (2011)

Fatigue properties of notched specimens made of FeP04 steel
von: D. Rozumek, et al.
Veröffentlicht: (2011)

Influence of heat treatment of specimens from Ti6Al4V manufactured by the technology of selective laser melting on structure and mechanical properties
von: S. V. Adzhamskyi, et al.
Veröffentlicht: (2022)

Influence of notch radius on fatigue crack propagation in beam specimens of 2017A-T4 alloy
von: D. Rozumek, et al.
Veröffentlicht: (2017)

Notch Effect on the Fatigue Behavior of a Hot Dip Galvanized Structural Steel
von: Berto, F., et al.
Veröffentlicht: (2015)

Quantification of the Influence of Residual Stresses on Fatigue Strength of Al-Alloy Welded Joints by Means of the Local Strain Energy Density Approach
von: Ferro, P., et al.
Veröffentlicht: (2016)

Numerical analysis of strain and stress state in cylindrical notched tensile specimens
von: Derpenski, L., et al.
Veröffentlicht: (2013)

Numerical analysis of strain and stress state in cylindrical notched tensile specimens
von: L. Derpenski, et al.
Veröffentlicht: (2013)

Fracture Assessment of Blunt V-Notched Graphite Specimens by Means of the Strain Energy Density
von: Torabi, A.R., et al.
Veröffentlicht: (2013)

Fracture Assessment of Blunt V-Notched Graphite Specimens by Means of the Strain Energy Density
von: A. R. Torabi, et al.
Veröffentlicht: (2013)

Large-Scale Yielding Failure Prediction of Notched Ductile Plates by Means of the Linear Elastic Notch Fracture Mechanics
von: Torabi, A.R., et al.
Veröffentlicht: (2017)

Influence of selective laser melting process parameters on the microstructure formation
von: M. A. Latypova, et al.
Veröffentlicht: (2023)

Calculation of Residual Stresses under Selective Laser Melting of Powders
von: A. V. Gusarov, et al.
Veröffentlicht: (2013)

Methods and specimens for comparative studies of fatigue resistance of parts with multilayer surfacing
von: I. A. Rjabtsev, et al.
Veröffentlicht: (2019)

A specimen for fatigue thresholds determination under cyclic transverse shear
von: O. P. Datsyshyn, et al.
Veröffentlicht: (2019)

Tensile Fracture Analysis of Key-Hole Notches by Means of the Strain Energy Density
von: Torabi, A.R., et al.
Veröffentlicht: (2016)

Effects of Geometrical Parameters on the Stress Field of Three-Dimensional Plates Weakened by Periodic Notches
von: A. Amini, et al.
Veröffentlicht: (2014)

Fatigue life of specimens from 40KH steel after wear-resistant
von: V. V. Knysh, et al.
Veröffentlicht: (2021)

Comparison of fatigue criteria for combined bending-torsion loading of nitrided and virgin specimens
von: Major, S., et al.
Veröffentlicht: (2008)

The change of the coercive force under fatigue testing of 40X steel specimens
von: Вакуленко, К. В., et al.
Veröffentlicht: (2015)

The change of the coercive force under fatigue testing of 40X steel specimens
von: Вакуленко, К. В., et al.
Veröffentlicht: (2015)

The change of the coercive force under fatigue testing of 40X steel specimens
von: K. V. Vakulenko, et al.
Veröffentlicht: (2015)

Laser and laser-microplasma alloying of surface of steel 38KhN3MFA specimens
von: V. D. Sheljagin, et al.
Veröffentlicht: (2014)

Modeling and Numerical Simulation of Fatigue Crack Growth in Cracked Specimens Containing Material Discontinuities
von: Jameel, Azher, et al.
Veröffentlicht: (2016)

Problems and prospects of studying the processes of selective laser melting of materials for aerospace engineering (Review)
von: M. V. Sokolovskyi
Veröffentlicht: (2022)

The Origanum vulgare (Lamiaceae) variety specimens as perspective producer of biologically active substance
von: H. V. Korniliev, et al.
Veröffentlicht: (2014)

Brittle Failure of Graphite Weakened by V-Notches: A Review of Some Recent Results under Different Loading Modes
von: Berto, F., et al.
Veröffentlicht: (2015)

Concerning the mapping of a circular multiply connected domain on the plane and circle with notches along the finite rectilinear segments
von: Dunduchenko , L. E., et al.
Veröffentlicht: (1988)

Influence of Temperature on Fatigue Crack Propagation in TiAl Alloys
von: R. C. Feng, et al.
Veröffentlicht: (2014)

Improved Method of Fatigue Life Assessment for TiAl Alloys
von: R. C. Feng, et al.
Veröffentlicht: (2014)

Improved Method of Fatigue Life Assessment for TiAl Alloys
von: Feng, R.C., et al.
Veröffentlicht: (2014)

Influence of Temperature on Fatigue Crack Propagation in TiAl Alloys
von: Feng, R.C., et al.
Veröffentlicht: (2014)

Microstructure of Co-Cr dental alloys manufactured by casting and 3D selective laser melting
von: M. O. Vasylyev, et al.
Veröffentlicht: (2022)

Dynamic stability of the process of turning nickel superalloys using a toolholder produced by selective laser sintering
von: O. A. Gutnichenko, et al.
Veröffentlicht: (2013)

Microstructure and properties of multilayer materials on Ti–6Al–4V alloy base, produced by powder technology
von: O. M. Ivasishin, et al.
Veröffentlicht: (2018)

The Wear Treatment by Nd:YAG Laser on Ti—6Al—4V Alloy: Effect of the Spot Size on Laser Beam and Seam Morphology
von: A. Gursel
Veröffentlicht: (2015)

Evaluation of the kinetics of fatigue fracture by automated analysis of the deformation relief on the surface of specimen with a central hole
von: P. O. Marushchak, et al.
Veröffentlicht: (2014)

Producing ingots of Ti–28Al–7Nb–2Mo–2Cr titanium aluminide by electron beam melting
von: S. V. Akhonin, et al.
Veröffentlicht: (2022)

Producing high-temperature titanium alloys of Ti–Al–Zr–Si–Mo–Nb–Sn system by electron beam melting
von: S. V. Akhonin, et al.
Veröffentlicht: (2022)

Influence of long-term soaking on the structure and properties of in625 alloy samples made by selective laser melting
von: N. O. Lysenko, et al.
Veröffentlicht: (2021)