Experimental and Numerical Analysis of Springback Behavior of Aluminum Alloys
Presented work deals with springback behavior of two different aluminum alloys, one falling into 5th series (AW-5754 H22) with a thickness of 0.8 mm and other from 6th series (AW-6082 T6) with 1.0 mm thickness. These materials are used for their various applications and hardening process. The spring...
Збережено в:
| Опубліковано в: : | Проблемы прочности |
|---|---|
| Дата: | 2017 |
| Автори: | , , |
| Формат: | Стаття |
| Мова: | English |
| Опубліковано: |
Інститут проблем міцності ім. Г.С. Писаренко НАН України
2017
|
| Теми: | |
| Онлайн доступ: | https://nasplib.isofts.kiev.ua/handle/123456789/173692 |
| Теги: |
Додати тег
Немає тегів, Будьте першим, хто поставить тег для цього запису!
|
| Назва журналу: | Digital Library of Periodicals of National Academy of Sciences of Ukraine |
| Цитувати: | Experimental and Numerical Analysis of Springback Behavior of Aluminum Alloys / J. Slota, M. Šiser, M. Dvorák // Проблемы прочности. — 2017. — № 4. — С. 93-102. — Бібліогр.: 16 назв. — англ. |
Репозитарії
Digital Library of Periodicals of National Academy of Sciences of Ukraine| id |
nasplib_isofts_kiev_ua-123456789-173692 |
|---|---|
| record_format |
dspace |
| spelling |
Slota, J. Šiser, M. Dvorák, M. 2020-12-16T16:24:27Z 2020-12-16T16:24:27Z 2017 Experimental and Numerical Analysis of Springback Behavior of Aluminum Alloys / J. Slota, M. Šiser, M. Dvorák // Проблемы прочности. — 2017. — № 4. — С. 93-102. — Бібліогр.: 16 назв. — англ. 0556-171X https://nasplib.isofts.kiev.ua/handle/123456789/173692 539.4 Presented work deals with springback behavior of two different aluminum alloys, one falling into 5th series (AW-5754 H22) with a thickness of 0.8 mm and other from 6th series (AW-6082 T6) with 1.0 mm thickness. These materials are used for their various applications and hardening process. The springback behavior was investigated by U-bending test. Bending tool was graduated jig with rollers and experiment was performed on R11 and R17 radii. The first series of specimens were oriented in a parallel direction and the other in a direction perpendicular to the rolling direction. Experimental results were measured with MATLAB measuring method and compared with finite element calculation carried out in PAM-STAMP. Influence of different yield functions was also examined. Рассматривается характеристика упругой отдачи двух различных алюминиевых сплавов: AW-5754 H22 толщиной 0,8 мм, принадлежащего к 5-й серии, и AW-6082 T6 толщиной 1,0 мм, принадлежащего к 6-й серии. Эти материалы используются для разнообразного применения, включая процесс упрочнения. Характеристика упругой отдачи исследовалась при испытаниях на U-образный изгиб. В качестве гибочного инструмента использовалось приспособление с роликами, и эксперимент проводился на радиусах R11 и R17. Одна группа образцов была ориентирована в направлении, параллельном направлению прокатки, другая в перпендикулярном. Экспериментальные результаты, полученные с использованием программного комплекса MAТLAB, сравнивались с расчетом методом конечных элементов с помощью программы PAM-STAMP. Исследовалось также влияние различных функций текучести. This contribution is the result of project APVV-14-0834 implementation. en Інститут проблем міцності ім. Г.С. Писаренко НАН України Проблемы прочности Научно-технический раздел Experimental and Numerical Analysis of Springback Behavior of Aluminum Alloys Экспериментально-численный анализ упругой отдачи алюминиевых сплавов Article published earlier |
| institution |
Digital Library of Periodicals of National Academy of Sciences of Ukraine |
| collection |
DSpace DC |
| title |
Experimental and Numerical Analysis of Springback Behavior of Aluminum Alloys |
| spellingShingle |
Experimental and Numerical Analysis of Springback Behavior of Aluminum Alloys Slota, J. Šiser, M. Dvorák, M. Научно-технический раздел |
| title_short |
Experimental and Numerical Analysis of Springback Behavior of Aluminum Alloys |
| title_full |
Experimental and Numerical Analysis of Springback Behavior of Aluminum Alloys |
| title_fullStr |
Experimental and Numerical Analysis of Springback Behavior of Aluminum Alloys |
| title_full_unstemmed |
Experimental and Numerical Analysis of Springback Behavior of Aluminum Alloys |
| title_sort |
experimental and numerical analysis of springback behavior of aluminum alloys |
| author |
Slota, J. Šiser, M. Dvorák, M. |
| author_facet |
Slota, J. Šiser, M. Dvorák, M. |
| topic |
Научно-технический раздел |
| topic_facet |
Научно-технический раздел |
| publishDate |
2017 |
| language |
English |
| container_title |
Проблемы прочности |
| publisher |
Інститут проблем міцності ім. Г.С. Писаренко НАН України |
| format |
Article |
| title_alt |
Экспериментально-численный анализ упругой отдачи алюминиевых сплавов |
| description |
Presented work deals with springback behavior of two different aluminum alloys, one falling into 5th series (AW-5754 H22) with a thickness of 0.8 mm and other from 6th series (AW-6082 T6) with 1.0 mm thickness. These materials are used for their various applications and hardening process. The springback behavior was investigated by U-bending test. Bending tool was graduated jig with rollers and experiment was performed on R11 and R17 radii. The first series of specimens were oriented in a parallel direction and the other in a direction perpendicular to the rolling direction. Experimental results were measured with MATLAB measuring method and compared with finite element calculation carried out in PAM-STAMP. Influence of different yield functions was also examined.
Рассматривается характеристика упругой отдачи двух различных алюминиевых сплавов: AW-5754 H22 толщиной 0,8 мм, принадлежащего к 5-й серии, и AW-6082 T6 толщиной 1,0 мм, принадлежащего к 6-й серии. Эти материалы используются для разнообразного применения, включая процесс упрочнения. Характеристика упругой отдачи исследовалась при испытаниях на U-образный изгиб. В качестве гибочного инструмента использовалось приспособление с роликами, и эксперимент проводился на радиусах R11 и R17. Одна группа образцов была ориентирована в направлении, параллельном направлению прокатки, другая в перпендикулярном. Экспериментальные результаты, полученные с использованием программного комплекса MAТLAB, сравнивались с расчетом методом конечных элементов с помощью программы PAM-STAMP. Исследовалось также влияние различных функций текучести.
|
| issn |
0556-171X |
| url |
https://nasplib.isofts.kiev.ua/handle/123456789/173692 |
| citation_txt |
Experimental and Numerical Analysis of Springback Behavior of Aluminum Alloys / J. Slota, M. Šiser, M. Dvorák // Проблемы прочности. — 2017. — № 4. — С. 93-102. — Бібліогр.: 16 назв. — англ. |
| work_keys_str_mv |
AT slotaj experimentalandnumericalanalysisofspringbackbehaviorofaluminumalloys AT siserm experimentalandnumericalanalysisofspringbackbehaviorofaluminumalloys AT dvorakm experimentalandnumericalanalysisofspringbackbehaviorofaluminumalloys AT slotaj éksperimentalʹnočislennyianalizuprugoiotdačialûminievyhsplavov AT siserm éksperimentalʹnočislennyianalizuprugoiotdačialûminievyhsplavov AT dvorakm éksperimentalʹnočislennyianalizuprugoiotdačialûminievyhsplavov |
| first_indexed |
2025-12-07T17:19:29Z |
| last_indexed |
2025-12-07T17:19:29Z |
| _version_ |
1850870826272817152 |