Experimental and Numerical Analysis of Springback Behavior of Aluminum Alloys
Presented work deals with springback behavior of two different aluminum alloys, one falling into 5th series (AW-5754 H22) with a thickness of 0.8 mm and other from 6th series (AW-6082 T6) with 1.0 mm thickness. These materials are used for their various applications and hardening process. The spring...
Saved in:
| Published in: | Проблемы прочности |
|---|---|
| Date: | 2017 |
| ISSN: | 0556-171X |
| Main Authors: | Slota, J., Šiser, M., Dvorák, M. |
| Format: | Article |
| Language: | English |
| Published: |
Інститут проблем міцності ім. Г.С. Писаренко НАН України
2017
|
| Subjects: | |
| Online Access: | https://nasplib.isofts.kiev.ua/handle/123456789/173692 |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Journal Title: | Digital Library of Periodicals of National Academy of Sciences of Ukraine |
| Cite this: | Experimental and Numerical Analysis of Springback Behavior of Aluminum Alloys / J. Slota, M. Šiser, M. Dvorák // Проблемы прочности. — 2017. — № 4. — С. 93-102. — Бібліогр.: 16 назв. — англ. |
Institution
Digital Library of Periodicals of National Academy of Sciences of UkraineSimilar Items
Advanced Material Models for Stamping of AW 5754 Aluminum Alloy
by: Slota, J., et al.
Published: (2016)
by: Slota, J., et al.
Published: (2016)
Improved Method of Springback Compensation in Metal Forming Analysis
by: Balon, P, et al.
Published: (2016)
by: Balon, P, et al.
Published: (2016)
Experimental and Numerical Modeling of the Extrusion Process in 1050A Aluminum Alloy for Design of Impact Energy-Absorbing Devices
by: Ryzińska, G., et al.
Published: (2016)
by: Ryzińska, G., et al.
Published: (2016)
Fatigue behavior of dissimilar friction stir welds between cast and wrought aluminum alloys
by: Uematsu, Y., et al.
Published: (2008)
by: Uematsu, Y., et al.
Published: (2008)
Experimental and Numerical Studies on Buckling and Post-Buckling Behavior of Cylindrical Panels Subjected to Compressive Axial Load
by: Shariati, M., et al.
Published: (2011)
by: Shariati, M., et al.
Published: (2011)
Experimental and Numerical Analysis of the Edge Effect for Corrugated and Honeycomb Fiberboard
by: Hua, G.J., et al.
Published: (2017)
by: Hua, G.J., et al.
Published: (2017)
Comparison between Isothermal and Non-Isothermal Fatigue Behavior in a Cast Aluminum-Silicon-Magnesium Alloy
by: Azadi, M., et al.
Published: (2015)
by: Azadi, M., et al.
Published: (2015)
Constitutive Behavior of 4343/4A60 Aluminum Alloy at Multi-Pass Hot Deformation
by: Tang, C., et al.
Published: (2017)
by: Tang, C., et al.
Published: (2017)
Effect of Aging Treatment on Surface Roughness, Mechanical Properties, and Fracture Behavior of 6xxx and 7xxx Aluminum Alloys
by: Sevim, I., et al.
Published: (2014)
by: Sevim, I., et al.
Published: (2014)
Mechanical Properties of Friction Stir-Welded Joints of Aluminum Alloys
by: Chen, W.J., et al.
Published: (2015)
by: Chen, W.J., et al.
Published: (2015)
Accelerated Life Test and FEM Simulation-Based Fatigue Analysis of an Aluminum Alloy Push Rod
by: Xua, L., et al.
Published: (2019)
by: Xua, L., et al.
Published: (2019)
Fracture Criterion for the Tensile Test of 7075 Aluminum Alloy
by: Chen, D.C., et al.
Published: (2015)
by: Chen, D.C., et al.
Published: (2015)
Investigation of Ultrasonic Assisted Friction Stir Spot Welding of Magnesium Alloy to Aluminum Alloy
by: Ji, S.D., et al.
Published: (2016)
by: Ji, S.D., et al.
Published: (2016)
Flexural Fatigue Behavior of Cross-Ply Laminates: An Experimental Approach
by: Bezazi, A.R., et al.
Published: (2003)
by: Bezazi, A.R., et al.
Published: (2003)
Experimental Analysis of the Influence of Structural Parameters on the Behavior of Glass-Fiber Reinforced Polypropylene Composites
by: Bounouas, L., et al.
Published: (2001)
by: Bounouas, L., et al.
Published: (2001)
Friction and Wear of Aluminum Alloy Reinforced by Ti0₂ Particles
by: Sarajan, Z.
Published: (2013)
by: Sarajan, Z.
Published: (2013)
Application of Stir Tool Force Measuring Dynamometer for Friction Stir Welding of Aluminum Alloys
by: Wang, H.F., et al.
Published: (2017)
by: Wang, H.F., et al.
Published: (2017)
A Numerical Study of the Flexural Behavior of Concrete Beams Reinforced with AFRP Bars
by: Buyukkaragoz, A., et al.
Published: (2013)
by: Buyukkaragoz, A., et al.
Published: (2013)
Evolution of discrete phenomena of inelasticity in aluminum alloy under cyclic loading
by: Pisarenko, G.G., et al.
Published: (2009)
by: Pisarenko, G.G., et al.
Published: (2009)
Experimental Analysis of Behavior and Damage of Sandwich Composite Materials in Three-Point Bending. Part 2. Fatigue Test Results and Damage Mechanisms
by: Bezazi, A., et al.
Published: (2009)
by: Bezazi, A., et al.
Published: (2009)
Experimental and Numerical Analysis of Normal and Lateral High-Velocity Impacts on Carbon Fiber-Reinforced Polymer Laminates
by: Huang, T., et al.
Published: (2016)
by: Huang, T., et al.
Published: (2016)
Experimental analysis of behavior and damage of sandwich composite materials in three-point bending. Part 1. Static tests and stiffness degradation at failure studies
by: Bezazi, A., et al.
Published: (2007)
by: Bezazi, A., et al.
Published: (2007)
Numerical Simulation of the Thermomechanical Behavior of a Hot Stamping Die
by: Jiang, Q.Y., et al.
Published: (2018)
by: Jiang, Q.Y., et al.
Published: (2018)
Surface Treatment with the Cold Roll Bonding Process for an Aluminum Alloy and Mild Steel
by: Tang, C., et al.
Published: (2015)
by: Tang, C., et al.
Published: (2015)
Experimental and Numerical Simulation of the Microcrack Coalescence Mechanism in Rock-Like Material
by: Haeri, H., et al.
Published: (2015)
by: Haeri, H., et al.
Published: (2015)
Relation between Mechanical Properties and Microstructure of Cast Aluminum Alloy AlSi9Cu3
by: Panuskova, M., et al.
Published: (2008)
by: Panuskova, M., et al.
Published: (2008)
Experimental-Numerical Study of Tensile Strength of the High-Strength Steel S690QL at Elevated Temperatures
by: Arsić, D., et al.
Published: (2016)
by: Arsić, D., et al.
Published: (2016)
Numerical Modeling and Mechanical Analysis of Combined Connection with Bolts and Welds
by: Liu, M.S, et al.
Published: (2016)
by: Liu, M.S, et al.
Published: (2016)
Simulation of the Lightweight Ceramic/Aluminum Alloy Composite Armor for Optimizing Component Thickness Ratios
by: Chang, Z.-L., et al.
Published: (2019)
by: Chang, Z.-L., et al.
Published: (2019)
Numerical and Experimental Analyses of Vibrations of Annular Plates with Multiple Eccentric Holes
by: Noga, S.
Published: (2016)
by: Noga, S.
Published: (2016)
Numerical Study of Failure Modes and Crack Propagation in 2A12 Aluminum Target against Blunt-Nosed Projectile at Low Yaw Angle
by: Deng, Y.F., et al.
Published: (2016)
by: Deng, Y.F., et al.
Published: (2016)
Numerical Simulation of the Damage Behavior of a Concrete Beam with an Anisotropic Damage Model
by: Long, Y.C., et al.
Published: (2018)
by: Long, Y.C., et al.
Published: (2018)
Effect of the Microcrack Inclination Angle on Crack Propagation Behavior of TiAl Alloy
by: Feng, R.C., et al.
Published: (2017)
by: Feng, R.C., et al.
Published: (2017)
Numerical Simulation and Experimental Study on the Interface Bonding of Stainless Steel Clad Plate
by: Jin, H.R., et al.
Published: (2018)
by: Jin, H.R., et al.
Published: (2018)
Investigation of Plastic Behavior of Alloyed Steel Deformed during Martensitic Transformation
by: Kandrotaitė-Janutienė, R., et al.
Published: (2016)
by: Kandrotaitė-Janutienė, R., et al.
Published: (2016)
Effect of Forging on Cyclic Hardening Behavior of CW 614 Brass Alloy
by: Mnif, R., et al.
Published: (2011)
by: Mnif, R., et al.
Published: (2011)
Duplex surface treatment of stainless steel X12CrNi 18 8
by: Kadlec, J., et al.
Published: (2008)
by: Kadlec, J., et al.
Published: (2008)
Constitutive description of creep behavior of Mg-4 Al-1Ca alloy
by: Milicka, K., et al.
Published: (2008)
by: Milicka, K., et al.
Published: (2008)
Analysis of Fracture Behavior of Thin Polycrystalline Diamond Films
by: Li, D.S., et al.
Published: (2014)
by: Li, D.S., et al.
Published: (2014)
Stacking Sequence Effect on the Fracture Behavior of Narrow L-Shaped Cross-Ply Laminates: Experimental Study
by: Pan, Z.Y., et al.
Published: (2018)
by: Pan, Z.Y., et al.
Published: (2018)
Similar Items
-
Advanced Material Models for Stamping of AW 5754 Aluminum Alloy
by: Slota, J., et al.
Published: (2016) -
Improved Method of Springback Compensation in Metal Forming Analysis
by: Balon, P, et al.
Published: (2016) -
Experimental and Numerical Modeling of the Extrusion Process in 1050A Aluminum Alloy for Design of Impact Energy-Absorbing Devices
by: Ryzińska, G., et al.
Published: (2016) -
Fatigue behavior of dissimilar friction stir welds between cast and wrought aluminum alloys
by: Uematsu, Y., et al.
Published: (2008) -
Experimental and Numerical Studies on Buckling and Post-Buckling Behavior of Cylindrical Panels Subjected to Compressive Axial Load
by: Shariati, M., et al.
Published: (2011)