Buchumschlag

Linear Micropolar Elasticity Analysis of Stresses in Bones under Static Loads

We discuss the finite element modeling of porous materials such as bones using the linear micropolar elasticity. In order to solve static boundary-value problems, we developed new finite elements, which capture the micropolar behavior of the material. Developed elements were implemented in the comme...

Ausführliche Beschreibung

Gespeichert in:

Bibliographische Detailangaben
Veröffentlicht in:	Проблемы прочности
Datum:	2017
Hauptverfasser:	Eremeyev, V.A., Skrzat, A., Stachowicz, F.
Format:	Artikel
Sprache:	Englisch
Veröffentlicht:	Інститут проблем міцності ім. Г.С. Писаренко НАН України 2017
Schlagworte:	Научно-технический раздел
Online Zugang:	https://nasplib.isofts.kiev.ua/handle/123456789/173693
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:	Digital Library of Periodicals of National Academy of Sciences of Ukraine
Zitieren:	Linear Micropolar Elasticity Analysis of Stresses in Bones under Static Loads / V.A. Eremeyev, A. Skrzat, F. Stachowicz // Проблемы прочности. — 2017. — № 4. — С. 103-114. — Бібліогр.: 43 назв. — англ.

Institution

Digital Library of Periodicals of National Academy of Sciences of Ukraine

Ähnliche Einträge

Application of the Micropolar Theory to the Strength Analysis of Bioceramic Materials for Bone Reconstruction
von: Eremeyev, V.A., et al.
Veröffentlicht: (2016)

Numerical simulation of elastic linear micropolar media based on the pore space length scale assumption
von: Jeong, J., et al.
Veröffentlicht: (2008)

Investigation of Fracture of Spheroplastics under Static and Dynamic Loading Conditions
von: Atroshenko, S.A., et al.
Veröffentlicht: (2002)

Modal Analysis of the Turbine Blade at Complex Thermomechanical Loads
von: Witek, L., et al.
Veröffentlicht: (2016)

Experimental and Theoretical Design Methodology of Hemispherical Shells under Extreme Static Loading
von: Galiev, Sh.U., et al.
Veröffentlicht: (2004)

Theoretical and Experimental Investigation of the Dissipated and Stored Energy Ratio in Iron under Quasi-Static and Cyclic Loading
von: Plekhov, O., et al.
Veröffentlicht: (2008)

Experimental Study and Finite Element Analysis of Critical Stresses of Reinforced Thermoplastic Pipes under Various Loads
von: Li, G.H., et al.
Veröffentlicht: (2016)

Static and Dynamic Buckling of Rectangular Functionally Graded Plates Subjected to Thermal Loading
von: Czechowski, L., et al.
Veröffentlicht: (2013)

Damage and Fracture of VT22 Titanium Alloy in Static Tension after the Application of Additional Pulse Loading
von: Марущак, П.О., et al.
Veröffentlicht: (2017)

Analysis of Viscoelastoplastic Behavior of Expanded Polystyrene under Compressive Loading: Experiments and Modeling
von: Imad, A., et al.
Veröffentlicht: (2001)

Elastic properties of B19’ structure of NiTi alloy under uniaxial and hydrostatic loading from first principles
von: Sestak, P., et al.
Veröffentlicht: (2008)

Fracture Investigation of Wood under Mixed Mode I/II Loading Based on Maximum Shear Stress Criterion
von: Fakoor, M., et al.
Veröffentlicht: (2013)

Study of Characteristic Equation of the Elastic Stress Field near Bimaterial Notche
von: Arabi, H., et al.
Veröffentlicht: (2013)

Fracture of Polymethylmethacrylate under Pulse Loading Conditions
von: Atroshenko, S.A., et al.
Veröffentlicht: (2002)

Determination of Probabilities Stress State of Epoxy Composite Materials under Static Load
von: L. V. Kravtsova, et al.
Veröffentlicht: (2013)

Static and Dynamic Tearing of Thin Steel Sheets
von: Aberkane, M., et al.
Veröffentlicht: (2003)

Elastoplastic Model of Sand under Complex Loading
von: Wan, Z., et al.
Veröffentlicht: (2018)

Response of an Indented Square Tube under Impact Loading
von: Tan, Z.H., et al.
Veröffentlicht: (2015)

Evolution of discrete phenomena of inelasticity in aluminum alloy under cyclic loading
von: Pisarenko, G.G., et al.
Veröffentlicht: (2009)

Shear Behavior of Non-Persistent Joint under High Normal Load
von: Sarfarazi, V., et al.
Veröffentlicht: (2017)

Vibrations of a Complex Systems with Damping under Dynamic Loading
von: Cabanska-Placzkiewicz, K.
Veröffentlicht: (2002)

Large-Scale Yielding Failure Prediction of Notched Ductile Plates by Means of the Linear Elastic Notch Fracture Mechanics
von: Torabi, A.R., et al.
Veröffentlicht: (2017)

Correlation dependences between short-term/long-term static strength characteristics and creep resistance of tungsten at high temperatures
von: Borisenko, V.A., et al.
Veröffentlicht: (2005)

Experimental analysis of behavior and damage of sandwich composite materials in three-point bending. Part 1. Static tests and stiffness degradation at failure studies
von: Bezazi, A., et al.
Veröffentlicht: (2007)

Area and point approaches in fatigue life evaluation under combined bending and torsion loading
von: Karolczuk, A., et al.
Veröffentlicht: (2008)

Radiation-Induced Embrittlement of WWER-440 Reactor Pressure Vessel Steel under Loading
von: Grinik, E.U., et al.
Veröffentlicht: (2003)

Effect of Grinding Parameters on the Surface Quality of Cutting Tools Made of High-Speed Low-Alloy Steels
von: Jaworski, J., et al.
Veröffentlicht: (2016)

Crack initiation and endurance limit of hard steels under multiaxial cyclic loads
von: Bomas, H., et al.
Veröffentlicht: (2008)

Residual Strains of Filter Materials Reinforced with Grid Inclusions under Cyclic Loading
von: Lin, Y.L., et al.
Veröffentlicht: (2015)

Simulation of the Mechanical Characteristics of a Granular Matter Tested under Biaxial Loading
von: Bi, Z.W., et al.
Veröffentlicht: (2015)

Elastoplastic Damage Model for Concrete under Triaxial Compression and Reversed Cyclic Loading
von: Zhang, J., et al.
Veröffentlicht: (2018)

Dynamic Stress Analysis of a Composite Electromagnetic Track
von: Tian, Z.G., et al.
Veröffentlicht: (2018)

Surface Strengthening Behavior of Magnesium Alloy with Laser Thermal Loading under Rapid Cooling
von: Ge, Y.Q., et al.
Veröffentlicht: (2018)

Energy Absorption Optimization of Multiaction Plastic Working Element of Vehicle Systems under Emergency Impact Loading Conditions
von: Boiko, A.
Veröffentlicht: (2002)

FEM Analysis of Clinching Tool Load in a Joint of Dual-Phase Steels
von: Kaščák, L., et al.
Veröffentlicht: (2016)

Discrepancy Analysis of Load–Displacement in the Combination Space for Concrete Box Girder Assessment
von: Ye, X.F., et al.
Veröffentlicht: (2018)

An Algorithm for Estimating Minimum Strength of Thin-Walled Structures to Resist Elastic Buckling under Pressure
von: Ishinabe, M., et al.
Veröffentlicht: (2012)

FEM Analysis of Stress Distribution in the Hermetic Harmonic Drive Flexspline
von: Pacana, J., et al.
Veröffentlicht: (2017)

Simulating the Crack Propagation Mechanism of Pre-Cracked Concrete Specimens under Shear Loading Conditions
von: Haeri, H.
Veröffentlicht: (2015)

Brittle Failure of Graphite Weakened by V-Notches: A Review of Some Recent Results under Different Loading Modes
von: Berto, F., et al.
Veröffentlicht: (2015)