Effect of Cyclic Stresses below the Endurance Limit on the Fatigue Life of 40Cr Steel
The effect of cyclic stresses below the endurance limit on the fatigue life of 40Cr medium-strength carbon steel is studied. Conventional constant-amplitude cyclic tests and specially designed variableamplitude ones are conducted under torsional loading at the stress ratio R = 0.1. The results show...
Gespeichert in:
| Veröffentlicht in: | Проблемы прочности |
|---|---|
| Datum: | 2018 |
| Hauptverfasser: | Zhao, L.H., Feng, J.Z., Zheng, S.L. |
| Format: | Artikel |
| Sprache: | Englisch |
| Veröffentlicht: |
Інститут проблем міцності ім. Г.С. Писаренко НАН України
2018
|
| Schlagworte: | |
| Online Zugang: | https://nasplib.isofts.kiev.ua/handle/123456789/173808 |
| Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
| Назва журналу: | Digital Library of Periodicals of National Academy of Sciences of Ukraine |
| Zitieren: | Effect of Cyclic Stresses below the Endurance Limit on the Fatigue Life of 40Cr Steel / L.H. Zhao, J.Z. Feng, S.L. Zheng // Проблемы прочности. — 2018. — № 1. — С. 7-16. — Бібліогр.: 17 назв. — англ. |
Institution
Digital Library of Periodicals of National Academy of Sciences of UkraineÄhnliche Einträge
Crack initiation and endurance limit of hard steels under multiaxial cyclic loads
von: Bomas, H., et al.
Veröffentlicht: (2008)
von: Bomas, H., et al.
Veröffentlicht: (2008)
Evaluation of the limit state and cyclic life of structural materials under thermal fatigue
von: Gopkalo, A.P.
Veröffentlicht: (2009)
von: Gopkalo, A.P.
Veröffentlicht: (2009)
Evaluating Approaches to Estimating Endurance and Cyclic Cracking Resistance of Metal Structure Components
von: T. I. Matchenko, et al.
Veröffentlicht: (2017)
von: T. I. Matchenko, et al.
Veröffentlicht: (2017)
Experimental Study on the Coaxing Effect of Multi-Level Stresses with Different Sequences
von: Zhao, L.H., et al.
Veröffentlicht: (2017)
von: Zhao, L.H., et al.
Veröffentlicht: (2017)
Corrosion-fatigue endurance of steel 35 in tap water under additional cavitation loading
von: O. T. Tsyrulnyk, et al.
Veröffentlicht: (2021)
von: O. T. Tsyrulnyk, et al.
Veröffentlicht: (2021)
On local fatigue life and fatigue strength
von: V. L. Busov, et al.
Veröffentlicht: (2010)
von: V. L. Busov, et al.
Veröffentlicht: (2010)
Calculation of fatigue life of cylindrical parts at multilayer surfacing and service cyclic thermomechanical loading
von: I. K. Senchenkov, et al.
Veröffentlicht: (2015)
von: I. K. Senchenkov, et al.
Veröffentlicht: (2015)
Corrosion fatigue endurance of steel 45 after surface nanostructuring by mechanical pulse treatment in different environments
von: V. I. Kyryliv, et al.
Veröffentlicht: (2024)
von: V. I. Kyryliv, et al.
Veröffentlicht: (2024)
Fatigue life of specimens from 40KH steel after wear-resistant
von: V. V. Knysh, et al.
Veröffentlicht: (2021)
von: V. V. Knysh, et al.
Veröffentlicht: (2021)
Improvement of cyclic life of welded joints with accumulated fatigue damages by using the high-frequency peening
von: V. V. Knysh, et al.
Veröffentlicht: (2010)
von: V. V. Knysh, et al.
Veröffentlicht: (2010)
Influence of high-frequency peening and atmosphere of marine climate on the cyclic life of T-welded joints with surface fatigue cracks
von: V. V. Knysh, et al.
Veröffentlicht: (2020)
von: V. V. Knysh, et al.
Veröffentlicht: (2020)
Evaluation of residual life of 3-D solid with a plane fatigue crack under cyclic loading
von: D. V. Rudavskyi
Veröffentlicht: (2015)
von: D. V. Rudavskyi
Veröffentlicht: (2015)
Specifics of development of instability in a beam with a current below bursian limit
von: Galich, A.N., et al.
Veröffentlicht: (2013)
von: Galich, A.N., et al.
Veröffentlicht: (2013)
A Method of Virtual Design of the Fatigue Life of a Dynamic Structure
von: Zhao, W., et al.
Veröffentlicht: (2015)
von: Zhao, W., et al.
Veröffentlicht: (2015)
Numerical Simulation of Fatigue Damage and Shape Instability Behavior of Steel 40Cr by the Damage-Coupled Crystal Plastic Model
von: Wu, G.C., et al.
Veröffentlicht: (2017)
von: Wu, G.C., et al.
Veröffentlicht: (2017)
Improved Method of Fatigue Life Assessment for TiAl Alloys
von: R. C. Feng, et al.
Veröffentlicht: (2014)
von: R. C. Feng, et al.
Veröffentlicht: (2014)
Improved Method of Fatigue Life Assessment for TiAl Alloys
von: Feng, R.C., et al.
Veröffentlicht: (2014)
von: Feng, R.C., et al.
Veröffentlicht: (2014)
Strength and endurance of powder BT1-0and Fe-18Cr-14Ni alloys in high-temperature hydrogen
von: A. D. Ivasyshyn, et al.
Veröffentlicht: (2012)
von: A. D. Ivasyshyn, et al.
Veröffentlicht: (2012)
Fatigue lifetime of ADI from ultimate tensile strength to permanent fatigue limit
von: Zapletal, J., et al.
Veröffentlicht: (2008)
von: Zapletal, J., et al.
Veröffentlicht: (2008)
Potentials Unbounded Below
von: Curtright, T.
Veröffentlicht: (2011)
von: Curtright, T.
Veröffentlicht: (2011)
Evaluation of strength and fatigue life of tubular structures
von: M. H. Stashchuk, et al.
Veröffentlicht: (2016)
von: M. H. Stashchuk, et al.
Veröffentlicht: (2016)
Influence of thermal treatment on the endurance of 65H steel springs
von: O. P. Ostash, et al.
Veröffentlicht: (2017)
von: O. P. Ostash, et al.
Veröffentlicht: (2017)
Reliability control and endurance of friction units of polygraphic machines
von: T. A. Roik, et al.
Veröffentlicht: (2011)
von: T. A. Roik, et al.
Veröffentlicht: (2011)
Specificities of Estimating the Effect of Load Asymmetry on Fatigue Strength and Cyclic Durability
von: А. D. Pogrebnyak
Veröffentlicht: (2024)
von: А. D. Pogrebnyak
Veröffentlicht: (2024)
Correlation of uniaxial cyclic torsion and tension-compression for low-cycle fatigue
von: T. Lagoda, et al.
Veröffentlicht: (2017)
von: T. Lagoda, et al.
Veröffentlicht: (2017)
A specimen for fatigue thresholds determination under cyclic transverse shear
von: O. P. Datsyshyn, et al.
Veröffentlicht: (2019)
von: O. P. Datsyshyn, et al.
Veröffentlicht: (2019)
Fatigue life of steel specimens 40KH after wear-resistant surfacing with a sublayer of low-carbon steel
von: I. O. Riabtsev, et al.
Veröffentlicht: (2021)
von: I. O. Riabtsev, et al.
Veröffentlicht: (2021)
Neon cryovacuum system for endurance tests of electrojet propulsion systems
von: Batracov, A.B., et al.
Veröffentlicht: (2015)
von: Batracov, A.B., et al.
Veröffentlicht: (2015)
Probability characteristics of resistance of welded joints of structural steels to multi-cyclic fatigue
von: V. I. Makhnenko, et al.
Veröffentlicht: (2010)
von: V. I. Makhnenko, et al.
Veröffentlicht: (2010)
Fatigue Life Prediction of Welded Box Structures
von: Zedira, H., et al.
Veröffentlicht: (2004)
von: Zedira, H., et al.
Veröffentlicht: (2004)
Contact endurance of steels after ion nitriding in hydrogen-free media
von: P. V. Kaplun, et al.
Veröffentlicht: (2019)
von: P. V. Kaplun, et al.
Veröffentlicht: (2019)
The influence of ion nitriding modes on fretting-fatigue of 40X steel
von: P. V. Kaplun, et al.
Veröffentlicht: (2018)
von: P. V. Kaplun, et al.
Veröffentlicht: (2018)
Kaplun P. V., Dykha A. V., and Gonchar V. A. Contact endurance of 40X steel in different media after ion nitriding and nitroquenching
von: P. V. Kaplun, et al.
Veröffentlicht: (2017)
von: P. V. Kaplun, et al.
Veröffentlicht: (2017)
To Solving the Problems of Fatigue under Combined Loading by Static Torsion and Symmetric Cyclic Bending
von: V. N. Pelykh
Veröffentlicht: (2019)
von: V. N. Pelykh
Veröffentlicht: (2019)
To Solution of the Fatigue Problems under Two-Axial Combined Symmetric and Asymmetric Cyclic Loading
von: A. D. Pogrebnjak
Veröffentlicht: (2016)
von: A. D. Pogrebnjak
Veröffentlicht: (2016)
Improvement of cyclic life of welded T-joints with surface cracks
von: V. V. Knysh, et al.
Veröffentlicht: (2009)
von: V. V. Knysh, et al.
Veröffentlicht: (2009)
The change of the coercive force under fatigue testing of 40X steel specimens
von: Вакуленко, К. В., et al.
Veröffentlicht: (2015)
von: Вакуленко, К. В., et al.
Veröffentlicht: (2015)
The change of the coercive force under fatigue testing of 40X steel specimens
von: Вакуленко, К. В., et al.
Veröffentlicht: (2015)
von: Вакуленко, К. В., et al.
Veröffentlicht: (2015)
The change of the coercive force under fatigue testing of 40X steel specimens
von: K. V. Vakulenko, et al.
Veröffentlicht: (2015)
von: K. V. Vakulenko, et al.
Veröffentlicht: (2015)
The Equivalent Amplitude Stress as a Solution of Mean Stress Effect Problem in Fatigue Analysis
von: T. Bednarek, et al.
Veröffentlicht: (2005)
von: T. Bednarek, et al.
Veröffentlicht: (2005)
Ähnliche Einträge
-
Crack initiation and endurance limit of hard steels under multiaxial cyclic loads
von: Bomas, H., et al.
Veröffentlicht: (2008) -
Evaluation of the limit state and cyclic life of structural materials under thermal fatigue
von: Gopkalo, A.P.
Veröffentlicht: (2009) -
Evaluating Approaches to Estimating Endurance and Cyclic Cracking Resistance of Metal Structure Components
von: T. I. Matchenko, et al.
Veröffentlicht: (2017) -
Experimental Study on the Coaxing Effect of Multi-Level Stresses with Different Sequences
von: Zhao, L.H., et al.
Veröffentlicht: (2017) -
Corrosion-fatigue endurance of steel 35 in tap water under additional cavitation loading
von: O. T. Tsyrulnyk, et al.
Veröffentlicht: (2021)