Numerical Simulation and Experimental Study on the Interface Bonding of Stainless Steel Clad Plate
The rolling temperature and rate of thickness reduction directly affect the interface bonding quality, mechanical properties and microstructure of stainless steel clad plate. In order to obtain reasonable rolling process parameters, the multi-pass rolling processes of Q345R/316L stainless steel clad...
Збережено в:
| Опубліковано в: : | Проблемы прочности |
|---|---|
| Дата: | 2018 |
| Автори: | , , , |
| Формат: | Стаття |
| Мова: | English |
| Опубліковано: |
Інститут проблем міцності ім. Г.С. Писаренко НАН України
2018
|
| Теми: | |
| Онлайн доступ: | https://nasplib.isofts.kiev.ua/handle/123456789/173811 |
| Теги: |
Додати тег
Немає тегів, Будьте першим, хто поставить тег для цього запису!
|
| Назва журналу: | Digital Library of Periodicals of National Academy of Sciences of Ukraine |
| Цитувати: | Numerical Simulation and Experimental Study on the Interface Bonding of Stainless Steel Clad Plate / H.R. Jin, L. Zhang, C. Dai, Y.L. Yi // Проблемы прочности. — 2018. — № 1. — С. 37-49. — Бібліогр.: 21 назв. — англ. |
Репозитарії
Digital Library of Periodicals of National Academy of Sciences of Ukraine| id |
nasplib_isofts_kiev_ua-123456789-173811 |
|---|---|
| record_format |
dspace |
| spelling |
Jin, H.R. Zhang, L. Dai, C. Yi, Y.L. 2020-12-21T18:03:04Z 2020-12-21T18:03:04Z 2018 Numerical Simulation and Experimental Study on the Interface Bonding of Stainless Steel Clad Plate / H.R. Jin, L. Zhang, C. Dai, Y.L. Yi // Проблемы прочности. — 2018. — № 1. — С. 37-49. — Бібліогр.: 21 назв. — англ. 0556-171X https://nasplib.isofts.kiev.ua/handle/123456789/173811 539.4 The rolling temperature and rate of thickness reduction directly affect the interface bonding quality, mechanical properties and microstructure of stainless steel clad plate. In order to obtain reasonable rolling process parameters, the multi-pass rolling processes of Q345R/316L stainless steel clad plate were simulated by the DEFORM software package. The distributions of stress, strain, and microstructure fields of the clad plate at different rolling temperatures and reduction rates were investigated. The bonding state of the interface was determined and the change rules governing the grain size of the rolled substrate layer also were analyzed. Vacuum hot-rolling tests were carried out to characterize the microstructure and mechanical properties. It was found that the higher the rolling temperature, the lower was the reduction rate needed to realize the interface bonding. However, too high temperatures produce a higher fraction of coarse grains, which affects the overall mechanical properties of the clad plate. It was concluded from the tests and numerical results that rolling temperature of 1150°C and reduction rate exceeding 50%, stainless allow one to produce steel clad plates with high interface bonding quality and excellent microstructure. Показано, что температура прокатки и степень обжатия оказывают влияние на силу сцепления на поверхности раздела, механические свойства и микроструктуру пластины, плакированной нержавеющей сталью. Процесс прокатки за четыре пропуска для пластины, плакированной нержавеющей сталью Q345R/316L, моделировали с помощью программы DEFORM, что позволило рассчитать его рабочие параметры. Исследовано распределение полей напряжений, деформаций и микроструктуры пластины при различной температуре прокатки и степени обжатия. Определена сила сцепления на поверхности раздела, проанализирован гранулометрический состав катаного подслоя при различных температурах. Проведены испытания образцов, полученных горячей вакуумной прокаткой, для оценки микроструктуры и механических свойств. Установлено, что чем выше температура прокатки, тем ниже степень обжатия, необходимая для обеспечения сцепления на поверхности раздела. Однако более высокие температуры вызывают увеличение доли грубых зерен, что оказывает влияние на механические свойства пластины. Экспериментально и численно показано, что температура прокатки в 1150°С и степень обжатия более 50% обеспечивают необходимую силу сцепления и качественную микроструктуру плакированной пластины This project was supported by the Joint Fund for Iron and Steel Research of the National Natural Science Foundation of China and Baosteel Group Corporation (Grant No. U1660111), Science and Technology Research Foundation Project in Colleges and Universities of Hebei Province (Grant No. ZD2017076) and the Natural Science Foundation-Steel and Iron Foundation of Hebei Province (Grant No. E2014203118). en Інститут проблем міцності ім. Г.С. Писаренко НАН України Проблемы прочности Научно-технический раздел Numerical Simulation and Experimental Study on the Interface Bonding of Stainless Steel Clad Plate Численное моделирование и экспериментальные исследования силы сцепления на поверхности раздела в пластине, плакированной нержавеющей сталью Article published earlier |
| institution |
Digital Library of Periodicals of National Academy of Sciences of Ukraine |
| collection |
DSpace DC |
| title |
Numerical Simulation and Experimental Study on the Interface Bonding of Stainless Steel Clad Plate |
| spellingShingle |
Numerical Simulation and Experimental Study on the Interface Bonding of Stainless Steel Clad Plate Jin, H.R. Zhang, L. Dai, C. Yi, Y.L. Научно-технический раздел |
| title_short |
Numerical Simulation and Experimental Study on the Interface Bonding of Stainless Steel Clad Plate |
| title_full |
Numerical Simulation and Experimental Study on the Interface Bonding of Stainless Steel Clad Plate |
| title_fullStr |
Numerical Simulation and Experimental Study on the Interface Bonding of Stainless Steel Clad Plate |
| title_full_unstemmed |
Numerical Simulation and Experimental Study on the Interface Bonding of Stainless Steel Clad Plate |
| title_sort |
numerical simulation and experimental study on the interface bonding of stainless steel clad plate |
| author |
Jin, H.R. Zhang, L. Dai, C. Yi, Y.L. |
| author_facet |
Jin, H.R. Zhang, L. Dai, C. Yi, Y.L. |
| topic |
Научно-технический раздел |
| topic_facet |
Научно-технический раздел |
| publishDate |
2018 |
| language |
English |
| container_title |
Проблемы прочности |
| publisher |
Інститут проблем міцності ім. Г.С. Писаренко НАН України |
| format |
Article |
| title_alt |
Численное моделирование и экспериментальные исследования силы сцепления на поверхности раздела в пластине, плакированной нержавеющей сталью |
| description |
The rolling temperature and rate of thickness reduction directly affect the interface bonding quality, mechanical properties and microstructure of stainless steel clad plate. In order to obtain reasonable rolling process parameters, the multi-pass rolling processes of Q345R/316L stainless steel clad plate were simulated by the DEFORM software package. The distributions of stress, strain, and microstructure fields of the clad plate at different rolling temperatures and reduction rates were investigated. The bonding state of the interface was determined and the change rules governing the grain size of the rolled substrate layer also were analyzed. Vacuum hot-rolling tests were carried out to characterize the microstructure and mechanical properties. It was found that the higher the rolling temperature, the lower was the reduction rate needed to realize the interface bonding. However, too high temperatures produce a higher fraction of coarse grains, which affects the overall mechanical properties of the clad plate. It was concluded from the tests and numerical results that rolling temperature of 1150°C and reduction rate exceeding 50%, stainless allow one to produce steel clad plates with high interface bonding quality and excellent microstructure.
Показано, что температура прокатки и степень обжатия оказывают влияние на силу сцепления на поверхности раздела, механические свойства и микроструктуру пластины, плакированной нержавеющей сталью. Процесс прокатки за четыре пропуска для пластины, плакированной нержавеющей сталью Q345R/316L, моделировали с помощью программы DEFORM, что позволило рассчитать его рабочие параметры. Исследовано распределение полей напряжений, деформаций и микроструктуры пластины при различной температуре прокатки и степени обжатия. Определена сила сцепления на поверхности раздела, проанализирован гранулометрический состав катаного подслоя при различных температурах. Проведены испытания образцов, полученных горячей вакуумной прокаткой, для оценки микроструктуры и механических свойств. Установлено, что чем выше температура прокатки, тем ниже степень обжатия, необходимая для обеспечения сцепления на поверхности раздела. Однако более высокие температуры вызывают увеличение доли грубых зерен, что оказывает влияние на механические свойства пластины. Экспериментально и численно показано, что температура прокатки в 1150°С и степень обжатия более 50% обеспечивают необходимую силу сцепления и качественную микроструктуру плакированной пластины
|
| issn |
0556-171X |
| url |
https://nasplib.isofts.kiev.ua/handle/123456789/173811 |
| citation_txt |
Numerical Simulation and Experimental Study on the Interface Bonding of Stainless Steel Clad Plate / H.R. Jin, L. Zhang, C. Dai, Y.L. Yi // Проблемы прочности. — 2018. — № 1. — С. 37-49. — Бібліогр.: 21 назв. — англ. |
| work_keys_str_mv |
AT jinhr numericalsimulationandexperimentalstudyontheinterfacebondingofstainlesssteelcladplate AT zhangl numericalsimulationandexperimentalstudyontheinterfacebondingofstainlesssteelcladplate AT daic numericalsimulationandexperimentalstudyontheinterfacebondingofstainlesssteelcladplate AT yiyl numericalsimulationandexperimentalstudyontheinterfacebondingofstainlesssteelcladplate AT jinhr čislennoemodelirovanieiéksperimentalʹnyeissledovaniâsilyscepleniânapoverhnostirazdelavplastineplakirovannoineržaveûŝeistalʹû AT zhangl čislennoemodelirovanieiéksperimentalʹnyeissledovaniâsilyscepleniânapoverhnostirazdelavplastineplakirovannoineržaveûŝeistalʹû AT daic čislennoemodelirovanieiéksperimentalʹnyeissledovaniâsilyscepleniânapoverhnostirazdelavplastineplakirovannoineržaveûŝeistalʹû AT yiyl čislennoemodelirovanieiéksperimentalʹnyeissledovaniâsilyscepleniânapoverhnostirazdelavplastineplakirovannoineržaveûŝeistalʹû |
| first_indexed |
2025-12-07T19:12:23Z |
| last_indexed |
2025-12-07T19:12:23Z |
| _version_ |
1850877928620949504 |