Friction and Wear Behavior of Wear-Resistant Belts in Drill Joints for Deep and Ultra-Deep Wells
The friction and wear of an new material for the drill joint were compared with those of traditional wear-resistant belt materials using an SD-1 test rig against a 42Mn2V steel counterface under deep and ultra-deep well conditions. This provides recommendations as to the tribological application of...
Збережено в:
| Опубліковано в: : | Проблемы прочности |
|---|---|
| Дата: | 2018 |
| Автори: | Zhang, K., Wang, Z.Q., Wang, D.G. |
| Формат: | Стаття |
| Мова: | Англійська |
| Опубліковано: |
Інститут проблем міцності ім. Г.С. Писаренко НАН України
2018
|
| Теми: | |
| Онлайн доступ: | https://nasplib.isofts.kiev.ua/handle/123456789/173816 |
| Теги: |
Додати тег
Немає тегів, Будьте першим, хто поставить тег для цього запису!
|
| Назва журналу: | Digital Library of Periodicals of National Academy of Sciences of Ukraine |
| Цитувати: | Трение и износ износостойких поясов в буровых разрезах для глубоких и сверглубоких скважин / K. Zhang, Z.Q. Wang, D.G. Wang // Проблемы прочности. — 2018. — № 1. — С. 84-90. — Бібліогр.: 16 назв. — англ. |
Репозитарії
Digital Library of Periodicals of National Academy of Sciences of UkraineСхожі ресурси
Numerical Modeling an Elastic Bending of a Drill String in an Ultra-Deep Curvilinear Bore-Drill
за авторством: V. I. Guljaev, та інші
Опубліковано: (2014)
за авторством: V. I. Guljaev, та інші
Опубліковано: (2014)
Friction-wear behaviors of chemical vapor deposited diamond films at high temperatures
за авторством: Kong Dejun, та інші
Опубліковано: (2019)
за авторством: Kong Dejun, та інші
Опубліковано: (2019)
Friction-wear behaviors of chemical vapor deposited diamond films at high temperatures
за авторством: D. Kong, та інші
Опубліковано: (2019)
за авторством: D. Kong, та інші
Опубліковано: (2019)
Effect of Pin Diameters on the Wear Characteristics of Friction Pairs
за авторством: Wei, Y.H., та інші
Опубліковано: (2019)
за авторством: Wei, Y.H., та інші
Опубліковано: (2019)
Assessment of wear resistance of a core drilling bit with hybridite reinforcing inserts
за авторством: M. V. Suprun, та інші
Опубліковано: (2015)
за авторством: M. V. Suprun, та інші
Опубліковано: (2015)
Influence of hydrogen on wear resistance of material in a friction pair of braking device
за авторством: M. V. Kindrachuk, та інші
Опубліковано: (2017)
за авторством: M. V. Kindrachuk, та інші
Опубліковано: (2017)
Peculiarities of wear and development of repair technology of drill bits
за авторством: B. V. Stefaniv
Опубліковано: (2024)
за авторством: B. V. Stefaniv
Опубліковано: (2024)
Modern Polymer Composites for Friction and Wear Applications
за авторством: K. Friedrich, та інші
Опубліковано: (2012)
за авторством: K. Friedrich, та інші
Опубліковано: (2012)
The influence of hydrogen on friction and wear of metals (Review)
за авторством: V. I. Pokhmurskyi, та інші
Опубліковано: (2012)
за авторством: V. I. Pokhmurskyi, та інші
Опубліковано: (2012)
Determination of the limiting belt angle with ribbon deep grooved
за авторством: R. V. Kirija, та інші
Опубліковано: (2015)
за авторством: R. V. Kirija, та інші
Опубліковано: (2015)
Possibilities of friction force and sidewall sticking reduction on directional and horizontal parts of deep well hole
за авторством: Ye. Chernova, та інші
Опубліковано: (2017)
за авторством: Ye. Chernova, та інші
Опубліковано: (2017)
Model of deep refining wells of pdc wells with bit
за авторством: B. V. Fedorov, та інші
Опубліковано: (2017)
за авторством: B. V. Fedorov, та інші
Опубліковано: (2017)
Investigation of wear-resistance of high-nitrogen steels under dry sliding friction conditions
за авторством: O. I. Balytskyi, та інші
Опубліковано: (2012)
за авторством: O. I. Balytskyi, та інші
Опубліковано: (2012)
Character of wear of synthetic diamonds differentstrength in impregnated drill bits
за авторством: A. M. Isonkin, та інші
Опубліковано: (2018)
за авторством: A. M. Isonkin, та інші
Опубліковано: (2018)
Analysis of cutting edge wear during drilling composite materials
за авторством: L. N. Devin, та інші
Опубліковано: (2017)
за авторством: L. N. Devin, та інші
Опубліковано: (2017)
Investigation of the Wear of the Metallic Part of Electrode System of Electrohydraulic Drill
за авторством: K. Kusaiynov, та інші
Опубліковано: (2015)
за авторством: K. Kusaiynov, та інші
Опубліковано: (2015)
Dominance of multicomponents and multiayer coverages on friction processes and wear
за авторством: V. M. Beresnev
Опубліковано: (2004)
за авторством: V. M. Beresnev
Опубліковано: (2004)
Wearing features of oil scrapper piston rings with tin coating under bench tests for friction and wear
за авторством: T. S. Skoblo, та інші
Опубліковано: (2017)
за авторством: T. S. Skoblo, та інші
Опубліковано: (2017)
Determining of optimal parameters for the trays on the conveyor belt with deep fluting
за авторством: R. V. Kirija, та інші
Опубліковано: (2014)
за авторством: R. V. Kirija, та інші
Опубліковано: (2014)
The wear resistance of titanium alloys
за авторством: O. M. Solovar, та інші
Опубліковано: (2016)
за авторством: O. M. Solovar, та інші
Опубліковано: (2016)
The role of copper on the formation of surface friction wear resistant layers of high chrome cast iron
за авторством: V. V. Tykhonovych, та інші
Опубліковано: (2014)
за авторством: V. V. Tykhonovych, та інші
Опубліковано: (2014)
Research of geothermal energy parameters in deep well
за авторством: V. Karpenko, та інші
Опубліковано: (2017)
за авторством: V. Karpenko, та інші
Опубліковано: (2017)
Investigation of wear-resistant protective coatings under conditions of hydro-abrasive wear
за авторством: B. V. Stefaniv
Опубліковано: (2016)
за авторством: B. V. Stefaniv
Опубліковано: (2016)
Influence of molibdenium under the hightemperature friction of titatium materials on wear
за авторством: A. M. Petrova, та інші
Опубліковано: (2011)
за авторством: A. M. Petrova, та інші
Опубліковано: (2011)
Friction and Wear of Aluminum Alloy Reinforced by Ti0₂ Particles
за авторством: Sarajan, Z.
Опубліковано: (2013)
за авторством: Sarajan, Z.
Опубліковано: (2013)
Influence of molibdenium under the hightemperature friction of titatium materials on wear
за авторством: Petrova, А.М., та інші
Опубліковано: (2011)
за авторством: Petrova, А.М., та інші
Опубліковано: (2011)
Friction and Wear of Aluminum Alloy Reinforced by Ti02 Particles
за авторством: Z. Sarajan
Опубліковано: (2013)
за авторством: Z. Sarajan
Опубліковано: (2013)
Kinetics of wear of steels with diffusion coatings under rolling friction
за авторством: P. V. Kaplun, та інші
Опубліковано: (2020)
за авторством: P. V. Kaplun, та інші
Опубліковано: (2020)
Local friction wear of elastic half-space with a protrusion
за авторством: O. P. Kozachok
Опубліковано: (2021)
за авторством: O. P. Kozachok
Опубліковано: (2021)
The corrosion and wear-resistant steels for pumps
за авторством: V. P. Havryliuk, та інші
Опубліковано: (2010)
за авторством: V. P. Havryliuk, та інші
Опубліковано: (2010)
Mechanical Properties of GF/pCBT Composites and Their Fusion-Bonded Joints: Influence of Process Parameters
за авторством: Zhang, L., та інші
Опубліковано: (2015)
за авторством: Zhang, L., та інші
Опубліковано: (2015)
Structure and wear resistance at abrasive wear of deposited material, hardened with carbides of different types
за авторством: I. A. Rjabtsev, та інші
Опубліковано: (2015)
за авторством: I. A. Rjabtsev, та інші
Опубліковано: (2015)
Peculiarities of wear and criteria of repairability of drill bits with diamond- hard alloy cutters
за авторством: V. F. Khorunov, та інші
Опубліковано: (2012)
за авторством: V. F. Khorunov, та інші
Опубліковано: (2012)
Rational Design of Vehicle Braking Systems with Reduced Wear of Friction Lining
за авторством: Velizade, Evren S.
Опубліковано: (2020)
за авторством: Velizade, Evren S.
Опубліковано: (2020)
Rational Design of Vehicle Braking Systems with Reduced Wear of Friction Lining
за авторством: Velizade, Evren S.
Опубліковано: (2020)
за авторством: Velizade, Evren S.
Опубліковано: (2020)
Rational Design of Vehicle Braking Systems with Reduced Wear of Friction Lining
за авторством: E. S. Velizade
Опубліковано: (2020)
за авторством: E. S. Velizade
Опубліковано: (2020)
Regularities of wear of metal polymer friction couples under influence of tribocurrents
за авторством: S. I. Kryshtopa, та інші
Опубліковано: (2019)
за авторством: S. I. Kryshtopa, та інші
Опубліковано: (2019)
New opportunities to determine the rate of wear of materials at friction by the indentation data
за авторством: Yu. V. Milman, та інші
Опубліковано: (2020)
за авторством: Yu. V. Milman, та інші
Опубліковано: (2020)
Investigation of wear resistance of composite alloys under the conditions of gas-abrasive wear at elevated temperatures
за авторством: A. P. Zhudra
Опубліковано: (2014)
за авторством: A. P. Zhudra
Опубліковано: (2014)
Comparison of geophysical sections of the Earth crust with the results of deep drilling in the Fennoscandian Shield
за авторством: Sharov, N. V.
Опубліковано: (2012)
за авторством: Sharov, N. V.
Опубліковано: (2012)
Схожі ресурси
-
Numerical Modeling an Elastic Bending of a Drill String in an Ultra-Deep Curvilinear Bore-Drill
за авторством: V. I. Guljaev, та інші
Опубліковано: (2014) -
Friction-wear behaviors of chemical vapor deposited diamond films at high temperatures
за авторством: Kong Dejun, та інші
Опубліковано: (2019) -
Friction-wear behaviors of chemical vapor deposited diamond films at high temperatures
за авторством: D. Kong, та інші
Опубліковано: (2019) -
Effect of Pin Diameters on the Wear Characteristics of Friction Pairs
за авторством: Wei, Y.H., та інші
Опубліковано: (2019) -
Assessment of wear resistance of a core drilling bit with hybridite reinforcing inserts
за авторством: M. V. Suprun, та інші
Опубліковано: (2015)