Prediction of a High Temperature Bonding Condition at the Interface for the Hot-Rolled Stainless Steel Clad Plate on Rolling
The stainless steel-carbon steel clad plate was investigated using the theoretical analysis of various factors influencing the high-temperature interfacial bonding during its rolling. Phenomenological prediction analysis model of interfacial bonding strength at high temperature which considers the v...
Gespeichert in:
| Veröffentlicht in: | Проблемы прочности |
|---|---|
| Datum: | 2018 |
| Hauptverfasser: | Guan, B., Chen, B.Y., Zang, Y., Qin, Q. |
| Format: | Artikel |
| Sprache: | Englisch |
| Veröffentlicht: |
Інститут проблем міцності ім. Г.С. Писаренко НАН України
2018
|
| Schlagworte: | |
| Online Zugang: | https://nasplib.isofts.kiev.ua/handle/123456789/173817 |
| Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
| Назва журналу: | Digital Library of Periodicals of National Academy of Sciences of Ukraine |
| Zitieren: | Prediction of a High Temperature Bonding Condition at the Interface for the Hot-Rolled Stainless Steel Clad Plate on Rolling / B. Guan, B.Y. Chen, Y. Zang, Q. Qin // Проблемы прочности. — 2018. — № 1. — С. 91-105. — Бібліогр.: 31 назв. — англ. |
Institution
Digital Library of Periodicals of National Academy of Sciences of UkraineÄhnliche Einträge
Thermomechanical Coupling Model for a Stainless Steel-Clad Plate on Heat Treatment
von: Guan, B., et al.
Veröffentlicht: (2019)
von: Guan, B., et al.
Veröffentlicht: (2019)
Process and property of hot-rolled stainless steel/carbon steel cladding bar
von: Zhining Jia, et al.
Veröffentlicht: (2016)
von: Zhining Jia, et al.
Veröffentlicht: (2016)
Influence of crystallization parameters and the hot deformation on characteristics of steel structure of with roll rolling
von: S. E. Kondratiuk, et al.
Veröffentlicht: (2016)
von: S. E. Kondratiuk, et al.
Veröffentlicht: (2016)
Cyclical recrystallization of ferrite in the low-carbon hot-rolled steel
von: A. M. Nesterenko, et al.
Veröffentlicht: (2009)
von: A. M. Nesterenko, et al.
Veröffentlicht: (2009)
Improvement of the surfacing technology for large backup rolls of hot rolling mills
von: L. K. Leshchynskyi, et al.
Veröffentlicht: (2021)
von: L. K. Leshchynskyi, et al.
Veröffentlicht: (2021)
Comparison of the Effect of Different Heat Treatment Processes on Microstructure and Mechanical Properties of Stainless Steel Clad Plate
von: Jin, H.R., et al.
Veröffentlicht: (2017)
von: Jin, H.R., et al.
Veröffentlicht: (2017)
Hot-cracking of high-alloyed steels evaluated by wedge rolling test
von: Schindler, I., et al.
Veröffentlicht: (2008)
von: Schindler, I., et al.
Veröffentlicht: (2008)
Influence of nonmetallics on formation of pores during hot rolling of bearing steel
von: O. M. Moroz, et al.
Veröffentlicht: (2015)
von: O. M. Moroz, et al.
Veröffentlicht: (2015)
Rheological properties of steel at roll casting-rolling
von: O. V. Nohovitsyn, et al.
Veröffentlicht: (2014)
von: O. V. Nohovitsyn, et al.
Veröffentlicht: (2014)
Preparation of the surface of hot-rolled strips for hot-dip galvanized
von: V. G. Ivanchenko
Veröffentlicht: (2014)
von: V. G. Ivanchenko
Veröffentlicht: (2014)
Surface Treatment with the Cold Roll Bonding Process for an Aluminum Alloy and Mild Steel
von: Tang, C., et al.
Veröffentlicht: (2015)
von: Tang, C., et al.
Veröffentlicht: (2015)
Quantitative model for the prediction of the corrosion rate of cold-rolled 316L steel
von: A. Dittes, et al.
Veröffentlicht: (2023)
von: A. Dittes, et al.
Veröffentlicht: (2023)
Features of formation of structure and properties in the hot-rolled steel alloyed with chromium, molybdenum and vanadium
von: T. N. Golubenko, et al.
Veröffentlicht: (2012)
von: T. N. Golubenko, et al.
Veröffentlicht: (2012)
Training hot rolled strips and sheets of especially thin
von: V. S. Panchenko, et al.
Veröffentlicht: (2014)
von: V. S. Panchenko, et al.
Veröffentlicht: (2014)
Research of technological parameters of hot variety rolling in the production of corrosion-resistant and fire-resistant reinforcement rolling
von: V. H. Razdobrieiev, et al.
Veröffentlicht: (2022)
von: V. H. Razdobrieiev, et al.
Veröffentlicht: (2022)
Calculating cyclical thermomechanical stresses in work rolls during hot strip rolling by finite element method
von: Ju. Prikhodko, et al.
Veröffentlicht: (2013)
von: Ju. Prikhodko, et al.
Veröffentlicht: (2013)
Analysis of the amount of retained austenite in the structure of steel rolls for sheet rolling
von: S. V. Bobyr, et al.
Veröffentlicht: (2020)
von: S. V. Bobyr, et al.
Veröffentlicht: (2020)
Rolling of the bimetallic aluminum-steel strips received by roller casting rolling
von: Ju. Gridin, et al.
Veröffentlicht: (2013)
von: Ju. Gridin, et al.
Veröffentlicht: (2013)
Peculiarities of formation of joints between dissimilar metals in vacuum hot roll welding
von: I. M. Nekljudov, et al.
Veröffentlicht: (2011)
von: I. M. Nekljudov, et al.
Veröffentlicht: (2011)
Formation of compounds of dissimilar metals in a solid phase by the method of hot rolling in vacuum
von: B. V. Borts
Veröffentlicht: (2011)
von: B. V. Borts
Veröffentlicht: (2011)
Theoretical and experimental research of hot rolling of aluminum strips for solar collector
von: Makeeva, A.S., et al.
Veröffentlicht: (2016)
von: Makeeva, A.S., et al.
Veröffentlicht: (2016)
Pecularities of electron beam welding of hot-rolled aluminum-lithium alloys
von: D. Drimal, et al.
Veröffentlicht: (2019)
von: D. Drimal, et al.
Veröffentlicht: (2019)
Improving the efficiency of the roll cooling system of the Hot Strip Mill 1680
von: Ju. Prikhodko, et al.
Veröffentlicht: (2019)
von: Ju. Prikhodko, et al.
Veröffentlicht: (2019)
Theoretical and experimental research of hot rolling of aluminum strips for solar collector
von: A. S. Makeeva, et al.
Veröffentlicht: (2016)
von: A. S. Makeeva, et al.
Veröffentlicht: (2016)
Salculation of Temperature in strips casting-rolling steel
von: A. V. Nogovitsyn, et al.
Veröffentlicht: (2014)
von: A. V. Nogovitsyn, et al.
Veröffentlicht: (2014)
Generalization of research results on the dynamics of continuous wide-strip hot-rolling mills
von: V. V. Verenev
Veröffentlicht: (2018)
von: V. V. Verenev
Veröffentlicht: (2018)
Improved hot pilger tube rolling by controlling the clearance between the sleeve and the dorn
von: V. F. Balakin, et al.
Veröffentlicht: (2015)
von: V. F. Balakin, et al.
Veröffentlicht: (2015)
Prediction of solidification parameters for twin-roll thin strip casting
von: N. I. Tarasevich, et al.
Veröffentlicht: (2016)
von: N. I. Tarasevich, et al.
Veröffentlicht: (2016)
Simulation of phase transformations in alloy steels subjected to cooling during heat treatment of rolling-mill rolls
von: S. V. Bobyr, et al.
Veröffentlicht: (2017)
von: S. V. Bobyr, et al.
Veröffentlicht: (2017)
Features of forming rolled formed sections in the rolls of the mill
von: M. E. Doktorov, et al.
Veröffentlicht: (2013)
von: M. E. Doktorov, et al.
Veröffentlicht: (2013)
Neutral corner while rolling in the non-driving rolls
von: A. I. Leshchenko, et al.
Veröffentlicht: (2012)
von: A. I. Leshchenko, et al.
Veröffentlicht: (2012)
Regularities and mechanisms of thermomechanical hardening of rolled low-carbon steel
von: V. E. Gromov, et al.
Veröffentlicht: (2011)
von: V. E. Gromov, et al.
Veröffentlicht: (2011)
Comparative study of two rolling bond process for super-thick Q235B
von: Guanghui Zhao, et al.
Veröffentlicht: (2016)
von: Guanghui Zhao, et al.
Veröffentlicht: (2016)
Increased durability and efficiency of the use of circular hot saws in a modern rolling mill
von: G. V. Bergeman
Veröffentlicht: (2016)
von: G. V. Bergeman
Veröffentlicht: (2016)
Structure and properties of hot-rolled boiler tubes made from continuously cast billets
von: L. V. Opryshko, et al.
Veröffentlicht: (2016)
von: L. V. Opryshko, et al.
Veröffentlicht: (2016)
Physical model of W and Ti compound during hot vacuum rolling in the solid phase
von: Andrieieva, O.L., et al.
Veröffentlicht: (2023)
von: Andrieieva, O.L., et al.
Veröffentlicht: (2023)
Peculiarities of mathematical modelling for steel ingots heating before rolling
von: E. N. Shebanits, et al.
Veröffentlicht: (2012)
von: E. N. Shebanits, et al.
Veröffentlicht: (2012)
Features of structure and properties of hot-rolled boiler tubes produced from non-deformed continuously cast billets of carbon steel
von: L. V. Opryshko, et al.
Veröffentlicht: (2012)
von: L. V. Opryshko, et al.
Veröffentlicht: (2012)
Information-analytical system of stabilization properties of rolled steel
von: E. V. Prykhodko, et al.
Veröffentlicht: (2011)
von: E. V. Prykhodko, et al.
Veröffentlicht: (2011)
Steel strip solidification in twin-roll casting unit
von: N. I. Tarasevich, et al.
Veröffentlicht: (2016)
von: N. I. Tarasevich, et al.
Veröffentlicht: (2016)
Ähnliche Einträge
-
Thermomechanical Coupling Model for a Stainless Steel-Clad Plate on Heat Treatment
von: Guan, B., et al.
Veröffentlicht: (2019) -
Process and property of hot-rolled stainless steel/carbon steel cladding bar
von: Zhining Jia, et al.
Veröffentlicht: (2016) -
Influence of crystallization parameters and the hot deformation on characteristics of steel structure of with roll rolling
von: S. E. Kondratiuk, et al.
Veröffentlicht: (2016) -
Cyclical recrystallization of ferrite in the low-carbon hot-rolled steel
von: A. M. Nesterenko, et al.
Veröffentlicht: (2009) -
Improvement of the surfacing technology for large backup rolls of hot rolling mills
von: L. K. Leshchynskyi, et al.
Veröffentlicht: (2021)