Hot Extrusion Effect on the Microstructure and Mechanical Properties of a Mg–Y–Nd–Zr Alloy
A Mg–Y–Nd–Zr alloy was prepared by casting and hot extrusion. The microstructure and mechanical properties of OM, SEM, XRD, TEM, and tensile tests were investigated with casting and hot extruded alloys. The results demonstrate that in a casting Mg–Y–Nd–Zr alloy, the α-Mg matrix is separated into th...
Збережено в:
| Опубліковано в: : | Проблемы прочности |
|---|---|
| Дата: | 2018 |
| Автори: | Sheng, L.Y., Du, B.N., Wang, B.J., Xu, D.K., Lai, C., Gao, Y., Xi, T.F. |
| Формат: | Стаття |
| Мова: | Англійська |
| Опубліковано: |
Інститут проблем міцності ім. Г.С. Писаренко НАН України
2018
|
| Теми: | |
| Онлайн доступ: | https://nasplib.isofts.kiev.ua/handle/123456789/173830 |
| Теги: |
Додати тег
Немає тегів, Будьте першим, хто поставить тег для цього запису!
|
| Назва журналу: | Digital Library of Periodicals of National Academy of Sciences of Ukraine |
| Цитувати: | Hot Extrusion Effect on the Microstructure and Mechanical Properties of a Mg–Y–Nd–Zr Alloy / L.Y. Sheng, B.N. Du, B.J. Wang, D.K. Xu, C. Lai, Y. Gao, T.F. Xi // Проблемы прочности. — 2018. — № 1. — С. 202-211. — Бібліогр.: 32 назв. — англ. |
Репозитарії
Digital Library of Periodicals of National Academy of Sciences of UkraineСхожі ресурси
Influence of Tantalum Addition on Microstructure and Mechanical Properties of the NiAl-Based Eutectic Alloy
за авторством: Sheng, L.Y., та інші
Опубліковано: (2017)
за авторством: Sheng, L.Y., та інші
Опубліковано: (2017)
Optimization of the Microstructure and Mechanical Properties of a Laves Phase-Strengthened Hypoeutectic NiAl/Cr(Mo,W) Alloy by Suction Casting
за авторством: Sheng, L.Y., та інші
Опубліковано: (2018)
за авторством: Sheng, L.Y., та інші
Опубліковано: (2018)
Assessment of the Microstructure and Mechanical Properties of a Laser-Joined Carbon Fiber-Reinforced Thermosetting Plastic and Stainless Steel
за авторством: Sheng, L.Y., та інші
Опубліковано: (2018)
за авторством: Sheng, L.Y., та інші
Опубліковано: (2018)
Microstructure and Wear Properties of the Quasi-Rapidly Solidified NiAl/ Cr(Mo,Dy) Hypoeutectic Alloy
за авторством: Sheng, L.Y.
Опубліковано: (2016)
за авторством: Sheng, L.Y.
Опубліковано: (2016)
Effect of the Surface Texture on Laser Joining of a Carbon Fiber-Reinforced Thermosetting Plastic and Stainless Steel
за авторством: Sheng, L.Y., та інші
Опубліковано: (2019)
за авторством: Sheng, L.Y., та інші
Опубліковано: (2019)
Twist extrusion
за авторством: Y. Beygelzimer, та інші
Опубліковано: (2014)
за авторством: Y. Beygelzimer, та інші
Опубліковано: (2014)
Twist extrusion
за авторством: Beygelzimer, Y., та інші
Опубліковано: (2014)
за авторством: Beygelzimer, Y., та інші
Опубліковано: (2014)
Twist extrusion: review
за авторством: Beygelzimer, Y., та інші
Опубліковано: (2015)
за авторством: Beygelzimer, Y., та інші
Опубліковано: (2015)
Experiment-calculated study on structure formation of thermoelectric material based on solid solutions of bismuth and antimony chalcogenides prepared by hot extrusion method
за авторством: M. G. Lavrentyev, та інші
Опубліковано: (2012)
за авторством: M. G. Lavrentyev, та інші
Опубліковано: (2012)
Peculiarities of microstructure of multilayer welds with different susceptibility to hot cracking
за авторством: K. A. Jushchenko, та інші
Опубліковано: (2016)
за авторством: K. A. Jushchenko, та інші
Опубліковано: (2016)
Effect of Y addition on the microstructures and mechanical properties of Mg-Gd-Y-Sm-Zr alloys
за авторством: Fu sanling, та інші
Опубліковано: (2017)
за авторством: Fu sanling, та інші
Опубліковано: (2017)
Effects of Sc and Zr on the texture and mechanical anisotropy of high strength Al - Zn - Mg alloy sheets
за авторством: Deng, Y., та інші
Опубліковано: (2016)
за авторством: Deng, Y., та інші
Опубліковано: (2016)
Structure of the lateral extrusion in the carpathians
за авторством: O. Hnylko
Опубліковано: (2017)
за авторством: O. Hnylko
Опубліковано: (2017)
Optimization Analysis of Initial Sheet Metal Contour Line for High-Strength Boron Steel in Hot Stamping
за авторством: Zhang, Z.Q., та інші
Опубліковано: (2016)
за авторством: Zhang, Z.Q., та інші
Опубліковано: (2016)
Shear Strength Optimization of Laser-Joined Polyphenylene Sulfide-Based CFRTP and Stainless Steel
за авторством: Sheng, L.Y., та інші
Опубліковано: (2018)
за авторством: Sheng, L.Y., та інші
Опубліковано: (2018)
Vortex Formation Under Twist Extrusion
за авторством: Beygelzimer, Yu., та інші
Опубліковано: (2016)
за авторством: Beygelzimer, Yu., та інші
Опубліковано: (2016)
Microstructure and wear properties of Ni–Ni3Si composites prepared by mechanical alloying and hot pressing sintering
за авторством: J. Zhang, та інші
Опубліковано: (2020)
за авторством: J. Zhang, та інші
Опубліковано: (2020)
Influence of Ca and Mg doping on the microstructure and optical properties of YAG ceramics
за авторством: Chaika, M.A., та інші
Опубліковано: (2017)
за авторством: Chaika, M.A., та інші
Опубліковано: (2017)
Influence of laser power and welding velocity on the microstructure of Zr-based bulk metallic glass welded joints
за авторством: W. Haiyan, та інші
Опубліковано: (2019)
за авторством: W. Haiyan, та інші
Опубліковано: (2019)
Microstructure and mechanical properties of c-BN reinforced (Ti,W)C-based cermet tool materials
за авторством: B. Fang, та інші
Опубліковано: (2021)
за авторством: B. Fang, та інші
Опубліковано: (2021)
External Stress Effect on Microstructure and Transformation Plasticity of Hot Work Tool Steel during Quenching
за авторством: Janutienë, R.K., та інші
Опубліковано: (2015)
за авторством: Janutienë, R.K., та інші
Опубліковано: (2015)
Segmentation of extrusion and lack of fusion in weld joints using morphological transforms
за авторством: I. B. Ivasenko
Опубліковано: (2013)
за авторством: I. B. Ivasenko
Опубліковано: (2013)
Results of experimental study of orthodontic teeth extrusion
за авторством: V. O. Pavlenko, та інші
Опубліковано: (2019)
за авторством: V. O. Pavlenko, та інші
Опубліковано: (2019)
Combined radial-backward extrusion of flange parts
за авторством: L. I. Alieva
Опубліковано: (2016)
за авторством: L. I. Alieva
Опубліковано: (2016)
Process and property of hot-rolled stainless steel/carbon steel cladding bar
за авторством: Zhining Jia, та інші
Опубліковано: (2016)
за авторством: Zhining Jia, та інші
Опубліковано: (2016)
Nonnewtonian fluid flow in an extrusion apparatus for three-dimensional printing
за авторством: A. F. Bulat, та інші
Опубліковано: (2021)
за авторством: A. F. Bulat, та інші
Опубліковано: (2021)
Determination of free phenolics and combined phenolics in foliage of Magnolia sieboldii K. Koch
за авторством: Gao Hongbing, та інші
Опубліковано: (2016)
за авторством: Gao Hongbing, та інші
Опубліковано: (2016)
Синтез, структура та воденьсорбційні властивості сплавів Nd₀,₅Pr₀,₅MgNi₄₋ₓFex та Nd₀,₅Pr₀,₅MgNi₄₋ₓCuₓ (x = 0,5, 1, 2)
за авторством: Вербовицький, Ю.В., та інші
Опубліковано: (2021)
за авторством: Вербовицький, Ю.В., та інші
Опубліковано: (2021)
Investigation of the influence of hot asymmetric rolling on the formation of microstructure, mechanical properties and performance characteristics of finished products
за авторством: V. H. Razdobrieiev, та інші
Опубліковано: (2019)
за авторством: V. H. Razdobrieiev, та інші
Опубліковано: (2019)
Microstructure and properties of aluminum composites with carbide-containing master alloy and titanium carbide prepared by hot-forging
за авторством: Yu. O. Shyshkina, та інші
Опубліковано: (2018)
за авторством: Yu. O. Shyshkina, та інші
Опубліковано: (2018)
The influence of microstructure of Al–Zn–Mg–Cu alloys on fracture mechanism of aircraft constructions
за авторством: O. V. Abolikhina, та інші
Опубліковано: (2021)
за авторством: O. V. Abolikhina, та інші
Опубліковано: (2021)
The process of magnesium chips remaking by the method of multichannel extrusion
за авторством: Ju. S. Synkov, та інші
Опубліковано: (2014)
за авторством: Ju. S. Synkov, та інші
Опубліковано: (2014)
On substantiation of mechanism of lateral extrusion of the crust of the Mountain Crimea
за авторством: Gonchar, V.
Опубліковано: (2015)
за авторством: Gonchar, V.
Опубліковано: (2015)
On substantiation of mechanism of lateral extrusion of the crust of the Mountain Crimea
за авторством: V. V. Gonchar
Опубліковано: (2015)
за авторством: V. V. Gonchar
Опубліковано: (2015)
Structural Strength and Service Life of the Extrusion Forming Die for Agricultural Engine Piston Heads
за авторством: Yang, L.Q., та інші
Опубліковано: (2018)
за авторством: Yang, L.Q., та інші
Опубліковано: (2018)
Probabilistic Simulation of Shape Instability Based on the True Microstructure Model
за авторством: Wu, G.C., та інші
Опубліковано: (2018)
за авторством: Wu, G.C., та інші
Опубліковано: (2018)
Changes in Structure and Regularities of Copper Hardening under Screw Extrusion
за авторством: V. N. Varjukhin, та інші
Опубліковано: (2013)
за авторством: V. N. Varjukhin, та інші
Опубліковано: (2013)
Constitutive Modeling for Al–Cu–Mg Alloy in Creep Aging Process
за авторством: Yang, Y.L., та інші
Опубліковано: (2016)
за авторством: Yang, Y.L., та інші
Опубліковано: (2016)
Nonlinear analysis of concrete-filled steel square tube strengthened by internal transverse stiffened bars under axial compression
за авторством: Nan Li, та інші
Опубліковано: (2017)
за авторством: Nan Li, та інші
Опубліковано: (2017)
Constitutive Behavior of 4343/4A60 Aluminum Alloy at Multi-Pass Hot Deformation
за авторством: Tang, C., та інші
Опубліковано: (2017)
за авторством: Tang, C., та інші
Опубліковано: (2017)
Схожі ресурси
-
Influence of Tantalum Addition on Microstructure and Mechanical Properties of the NiAl-Based Eutectic Alloy
за авторством: Sheng, L.Y., та інші
Опубліковано: (2017) -
Optimization of the Microstructure and Mechanical Properties of a Laves Phase-Strengthened Hypoeutectic NiAl/Cr(Mo,W) Alloy by Suction Casting
за авторством: Sheng, L.Y., та інші
Опубліковано: (2018) -
Assessment of the Microstructure and Mechanical Properties of a Laser-Joined Carbon Fiber-Reinforced Thermosetting Plastic and Stainless Steel
за авторством: Sheng, L.Y., та інші
Опубліковано: (2018) -
Microstructure and Wear Properties of the Quasi-Rapidly Solidified NiAl/ Cr(Mo,Dy) Hypoeutectic Alloy
за авторством: Sheng, L.Y.
Опубліковано: (2016) -
Effect of the Surface Texture on Laser Joining of a Carbon Fiber-Reinforced Thermosetting Plastic and Stainless Steel
за авторством: Sheng, L.Y., та інші
Опубліковано: (2019)