Sedimentation Influence on Magnetorheological Brake Torque Moment
The aim of our research was to determine how sedimentation in magnetorheological fluid influences torque moment of a magnetorheological brake. Five different magnetorheological fluids (MRF-140CG, MRF-122EG, from Lord Corporation, USA, MRHCCS4-A and MRHCCS4-B are from Liquids Research Company, UK and...
Saved in:
| Published in: | Проблемы прочности |
|---|---|
| Date: | 2018 |
| Main Authors: | Vėžys, J., Mažika, D., Kandrotaitė-Janutienė, R., Dragašius, E., Kilikevičius, A., Korobko, E.V. |
| Format: | Article |
| Language: | English |
| Published: |
Інститут проблем міцності ім. Г.С. Писаренко НАН України
2018
|
| Subjects: | |
| Online Access: | https://nasplib.isofts.kiev.ua/handle/123456789/173889 |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Journal Title: | Digital Library of Periodicals of National Academy of Sciences of Ukraine |
| Cite this: | Sedimentation Influence on Magnetorheological Brake Torque Moment / J. Vėžys, D. Mažika, R. Kandrotaitė-Janutienė, E. Dragašius, A. Kilikevičius, E.V. Korobko // Проблемы прочности. — 2018. — № 2. — С. 146-158. — Бібліогр.: 33 назв. — англ. |
Institution
Digital Library of Periodicals of National Academy of Sciences of UkraineSimilar Items
Investigation of Plastic Behavior of Alloyed Steel Deformed during Martensitic Transformation
by: Kandrotaitė-Janutienė, R., et al.
Published: (2016)
by: Kandrotaitė-Janutienė, R., et al.
Published: (2016)
Finite Element Analysis of the Temperature Field of an Emergency Brake and Study of its Thermal Properties
by: Wen, H., et al.
Published: (2015)
by: Wen, H., et al.
Published: (2015)
External Stress Effect on Microstructure and Transformation Plasticity of Hot Work Tool Steel during Quenching
by: Janutienë, R.K., et al.
Published: (2015)
by: Janutienë, R.K., et al.
Published: (2015)
Magnetorheology of smart suspensions in blood
by: O. O. Melnyk, et al.
Published: (2016)
by: O. O. Melnyk, et al.
Published: (2016)
Influence of Differential Thermochemical Treatment of Bolts on Tightening Parameters in a Bolted Joint
by: Graboń, W., et al.
Published: (2016)
by: Graboń, W., et al.
Published: (2016)
APPLICATION OF MAGNETORHEOLOGICAL ELASTOMERS FOR PERFORMANCE CONTROL OF CUSHIONING SYSTEMS FOR WHEELED VEHICLES
by: Dushchenko, V. V., et al.
Published: (2019)
by: Dushchenko, V. V., et al.
Published: (2019)
Influence of H₂S Corrosion on Tensile Properties and Fracture Toughness of X80 Pipeline Steel
by: Gu, L., et al.
Published: (2019)
by: Gu, L., et al.
Published: (2019)
Influence of Different Preparation Processes on the Mechanical Properties of Carbon Nanotube-Reinforced Copper Matrix Composites
by: Guo, C.H., et al.
Published: (2015)
by: Guo, C.H., et al.
Published: (2015)
Influence of Tantalum Addition on Microstructure and Mechanical Properties of the NiAl-Based Eutectic Alloy
by: Sheng, L.Y., et al.
Published: (2017)
by: Sheng, L.Y., et al.
Published: (2017)
Influence of Temperature on Fatigue Crack Propagation in TiAl Alloys
by: Feng, R.C., et al.
Published: (2014)
by: Feng, R.C., et al.
Published: (2014)
Influence of nitriding on the fatigue behavior and fracture micromechanisms of nodular cast Iron
by: Konecna, R., et al.
Published: (2008)
by: Konecna, R., et al.
Published: (2008)
Modeling and influence of shear retention parameter on the response of reinforced concrete structural elements
by: Dahmani, L., et al.
Published: (2009)
by: Dahmani, L., et al.
Published: (2009)
Experimental Analysis of the Influence of Structural Parameters on the Behavior of Glass-Fiber Reinforced Polypropylene Composites
by: Bounouas, L., et al.
Published: (2001)
by: Bounouas, L., et al.
Published: (2001)
Investigation of Cold Rolling Influence on near Surface Residual Stress Distribution in Explosive Welded Multilayer
by: Sedighi, M., et al.
Published: (2012)
by: Sedighi, M., et al.
Published: (2012)
Mechanical Properties of GF/pCBT Composites and Their Fusion-Bonded Joints: Influence of Process Parameters
by: Zhang, L., et al.
Published: (2015)
by: Zhang, L., et al.
Published: (2015)
FEM Analysis of Clinching Tool Load in a Joint of Dual-Phase Steels
by: Kaščák, L., et al.
Published: (2016)
by: Kaščák, L., et al.
Published: (2016)
Finite Element Calculation of Clinching with Rigid Die of Three Steel Sheets
by: Kaščák, L., et al.
Published: (2017)
by: Kaščák, L., et al.
Published: (2017)
Analysis of Cutting Surface During Cutting of Electric Sheets
by: Spišák, E., et al.
Published: (2017)
by: Spišák, E., et al.
Published: (2017)
Износ штампа механического пресса в процессе клинч-соединения листов из высокопрочных сталей методом холодной формовки
by: Kaščák, L., et al.
Published: (2017)
by: Kaščák, L., et al.
Published: (2017)
Grain boundary influence during short fatigue crack growth using a discrete dislocation technique
by: Hansson, P., et al.
Published: (2008)
by: Hansson, P., et al.
Published: (2008)
Influence of Nanoalumina Particles on the Static and High-Cycle Fatigue Properties of Peel-Loaded Adhesive-Bonded Joints
by: Kubita, A., et al.
Published: (2016)
by: Kubita, A., et al.
Published: (2016)
Formability of Tailor-Welded Blanks from Dual-Phase and Bake-Hardened Steels with a Planar Anisotropy Influence
by: Schrek, A., et al.
Published: (2017)
by: Schrek, A., et al.
Published: (2017)
Influence of carbides morphology on fracture toughness of cast steel G200CrMoNi4-3-3
by: Stradomski, Z., et al.
Published: (2008)
by: Stradomski, Z., et al.
Published: (2008)
Quantification of the Influence of Residual Stresses on Fatigue Strength of Al-Alloy Welded Joints by Means of the Local Strain Energy Density Approach
by: Ferro, P., et al.
Published: (2016)
by: Ferro, P., et al.
Published: (2016)
Influence of a Strain Rate and Temperature on the Crack Tip Stress and Microstructure Evolution of Monocrystalline Nickel: a Molecular Dynamics Simulation
by: Wu, W.P., et al.
Published: (2014)
by: Wu, W.P., et al.
Published: (2014)
Failure of Zr50 Ti16.5 Cu15 Ni18.5 amorphous metallic ribbon
by: Miskuf, J., et al.
Published: (2008)
by: Miskuf, J., et al.
Published: (2008)
Comparison of fatigue criteria for combined bending-torsion loading of nitrided and virgin specimens
by: Major, S., et al.
Published: (2008)
by: Major, S., et al.
Published: (2008)
Thermoelastic stress state in the brake drum with prefracture zone at braking the wheel machine
by: E. I. ulfugarov
Published: (2014)
by: E. I. ulfugarov
Published: (2014)
Mechanical Properties and Machinability of Glass Fiber-Reinforced Polyetheretherketone
by: Ji, S.J., et al.
Published: (2015)
by: Ji, S.J., et al.
Published: (2015)
Mechanical properties and fracture behavior of high-strength steels
by: Musalek, R., et al.
Published: (2008)
by: Musalek, R., et al.
Published: (2008)
Review of new formats for fracture mechanics parameters
by: Landes, J.D., et al.
Published: (2006)
by: Landes, J.D., et al.
Published: (2006)
FEM Analysis of Stress Distribution in the Hermetic Harmonic Drive Flexspline
by: Pacana, J., et al.
Published: (2017)
by: Pacana, J., et al.
Published: (2017)
Experimental and Theoretical Design Methodology of Hemispherical Shells under Extreme Static Loading
by: Galiev, Sh.U., et al.
Published: (2004)
by: Galiev, Sh.U., et al.
Published: (2004)
The Sources and Affecting Factors of Creep Threshold Stress of Magnesium Based Composite
by: Tian, J.
Published: (2016)
by: Tian, J.
Published: (2016)
Microstructure and Mechanical Properties of TiC Nanoparticle-Reinforced Iron-Matrix Composites
by: Kim, J.M., et al.
Published: (2014)
by: Kim, J.M., et al.
Published: (2014)
Fatigue lifetime of ADI from ultimate tensile strength to permanent fatigue limit
by: Zapletal, J., et al.
Published: (2008)
by: Zapletal, J., et al.
Published: (2008)
Strain-Induced Precipitation Kinetics of Vanadium Carbonitride Precipitates with the Cubic Structure in High-Strength Weathering Steels
by: Cheng, J., et al.
Published: (2018)
by: Cheng, J., et al.
Published: (2018)
Coupled Effects of Strain Rate and Temperature on Deformation Twinning in Cu-Zn Alloy
by: Zhou, P., et al.
Published: (2016)
by: Zhou, P., et al.
Published: (2016)
Numerical Simulation of Steel Target Penetration by Shaped Charge Distended Jet with a High-Polymer Liner
by: Yi, J.Y., et al.
Published: (2017)
by: Yi, J.Y., et al.
Published: (2017)
Effect of the SiC Particle Orientation Anisotropy on the Tensile Properties of a Spray-Formed SiCp/Al-Si Composite
by: Li, W., et al.
Published: (2014)
by: Li, W., et al.
Published: (2014)
Similar Items
-
Investigation of Plastic Behavior of Alloyed Steel Deformed during Martensitic Transformation
by: Kandrotaitė-Janutienė, R., et al.
Published: (2016) -
Finite Element Analysis of the Temperature Field of an Emergency Brake and Study of its Thermal Properties
by: Wen, H., et al.
Published: (2015) -
External Stress Effect on Microstructure and Transformation Plasticity of Hot Work Tool Steel during Quenching
by: Janutienë, R.K., et al.
Published: (2015) -
Magnetorheology of smart suspensions in blood
by: O. O. Melnyk, et al.
Published: (2016) -
Influence of Differential Thermochemical Treatment of Bolts on Tightening Parameters in a Bolted Joint
by: Graboń, W., et al.
Published: (2016)