Fatigue Damage Analysis of an Asphalt Mixture Based on Pseudostiffness
The fatigue damage characteristics of an asphalt mixture were analyzed, a new fatigue damage model was constructed based on the Schapery pseudovariable theory and continuum damage mechanics. According to the Schapery theory and the generalized elastic-viscoelastic correspondence principle, the exper...
Gespeichert in:
| Veröffentlicht in: | Проблемы прочности |
|---|---|
| Datum: | 2018 |
| Hauptverfasser: | Wang, X.R., Yin, B.Y., Luo W.B. |
| Format: | Artikel |
| Sprache: | Englisch |
| Veröffentlicht: |
Інститут проблем міцності ім. Г.С. Писаренко НАН України
2018
|
| Schlagworte: | |
| Online Zugang: | https://nasplib.isofts.kiev.ua/handle/123456789/173995 |
| Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
| Назва журналу: | Digital Library of Periodicals of National Academy of Sciences of Ukraine |
| Zitieren: | Fatigue Damage Analysis of an Asphalt Mixture Based on Pseudostiffness / X.R. Wang, B.Y. Yin, W.B. Luo // Проблемы прочности. — 2018. — № 5. — С. 89-97. — Бібліогр.: 18 назв. — англ. |
Institution
Digital Library of Periodicals of National Academy of Sciences of UkraineÄhnliche Einträge
Creep Lifetime Assessment of Pressure-Tight PE100 Pipes Based on a Slow Fatigue Crack Growth
von: Luo, W.B., et al.
Veröffentlicht: (2018)
von: Luo, W.B., et al.
Veröffentlicht: (2018)
Numerical Simulation of Fatigue Damage and Shape Instability Behavior of Steel 40Cr by the Damage-Coupled Crystal Plastic Model
von: Wu, G.C., et al.
Veröffentlicht: (2017)
von: Wu, G.C., et al.
Veröffentlicht: (2017)
High-Cycle Fatigue Properties and Damage Mechanism of Q345B Structural Steel
von: Hu, X.L., et al.
Veröffentlicht: (2017)
von: Hu, X.L., et al.
Veröffentlicht: (2017)
Experimental Analysis of Behavior and Damage of Sandwich Composite Materials in Three-Point Bending. Part 2. Fatigue Test Results and Damage Mechanisms
von: Bezazi, A., et al.
Veröffentlicht: (2009)
von: Bezazi, A., et al.
Veröffentlicht: (2009)
Isothermal Fatigue and Creep-Fatigue Interaction Behavior of Nickel-Base Directionally Solidified Superalloy
von: Haq, A.U., et al.
Veröffentlicht: (2018)
von: Haq, A.U., et al.
Veröffentlicht: (2018)
Study on a Cracked Single-Layer 2D Woven Composite Plate: Fracture Mode and Damage Analysis
von: Wang, Y.Q., et al.
Veröffentlicht: (2018)
von: Wang, Y.Q., et al.
Veröffentlicht: (2018)
Effect of Preliminary Torsional Strain on Low-Cycle Fatigue of Q345B Structural Steel
von: Hu, X.L., et al.
Veröffentlicht: (2019)
von: Hu, X.L., et al.
Veröffentlicht: (2019)
Simulation of the Spindle Coupled Multi-Axial Loading Fatigue Test of a Rear Axle
von: Dong, Z., et al.
Veröffentlicht: (2017)
von: Dong, Z., et al.
Veröffentlicht: (2017)
An Improved Projection Method for Determination of Fatigue Parameters of Metal Structures Based on Spherical Direction Cosine Group Construction
von: Yang, B., et al.
Veröffentlicht: (2016)
von: Yang, B., et al.
Veröffentlicht: (2016)
Thermal Fatigue Life Prediction of Ventilation Air Methane Oxidation Bed
von: Liu, Y.Q., et al.
Veröffentlicht: (2016)
von: Liu, Y.Q., et al.
Veröffentlicht: (2016)
A Method of Virtual Design of the Fatigue Life of a Dynamic Structure
von: Zhao, W., et al.
Veröffentlicht: (2015)
von: Zhao, W., et al.
Veröffentlicht: (2015)
Fatigue Fracture Analysis of Composite Plates with an Elliptical Hole
von: Kielbasa, B., et al.
Veröffentlicht: (2017)
von: Kielbasa, B., et al.
Veröffentlicht: (2017)
Short Fatigue Crack Growth at Different Maintenance Times for LZ50 Steel
von: Yang, B., et al.
Veröffentlicht: (2015)
von: Yang, B., et al.
Veröffentlicht: (2015)
Improved Method of Fatigue Life Assessment for TiAl Alloys
von: Feng, R.C., et al.
Veröffentlicht: (2014)
von: Feng, R.C., et al.
Veröffentlicht: (2014)
A Probabilistic Model for Describing Short Fatigue Crack Growth Behavior of LZ50 Steel
von: Yang, B., et al.
Veröffentlicht: (2016)
von: Yang, B., et al.
Veröffentlicht: (2016)
Accelerated Life Test and FEM Simulation-Based Fatigue Analysis of an Aluminum Alloy Push Rod
von: Xua, L., et al.
Veröffentlicht: (2019)
von: Xua, L., et al.
Veröffentlicht: (2019)
Research on Rapidly Shaped Charge Cutting Technology of Aircraft Damaged Thin-Wall Structure
von: Cui, A.Y., et al.
Veröffentlicht: (2016)
von: Cui, A.Y., et al.
Veröffentlicht: (2016)
Study on the Failure Mechanism of the Polymorphic Mixture for Remanifactured Machinery Parts
von: Liu, C.H., et al.
Veröffentlicht: (2018)
von: Liu, C.H., et al.
Veröffentlicht: (2018)
Multiscale Modeling-Based Assessment of Elastic Properties of SLGS-Polymer Nanocomposites with Double-Atom Vacancy Defects
von: Wang, Z.Q., et al.
Veröffentlicht: (2018)
von: Wang, Z.Q., et al.
Veröffentlicht: (2018)
Modeling of Damage Interaction in Fatigue Relaxation for Long-Term Life Prediction. Case of Alloy 800 Grade 2 Study at 550°C
von: Gharad, A. El, et al.
Veröffentlicht: (2002)
von: Gharad, A. El, et al.
Veröffentlicht: (2002)
Numerical Simulation of the Damage Behavior of a Concrete Beam with an Anisotropic Damage Model
von: Long, Y.C., et al.
Veröffentlicht: (2018)
von: Long, Y.C., et al.
Veröffentlicht: (2018)
Smooth Particle Hydrodynamics-Based Characteristics of a Shaped Jet from Different Materials
von: Yin, J.P., et al.
Veröffentlicht: (2019)
von: Yin, J.P., et al.
Veröffentlicht: (2019)
Analysis and Experimental Study of Vibration System Characteristics of Ultrasonic Compound Electrical Machining
von: Deng, Z.Q., et al.
Veröffentlicht: (2017)
von: Deng, Z.Q., et al.
Veröffentlicht: (2017)
Analysis of Fatigue and Crack Growth in Carbon-Fiber Epoxy Matrix Composite Laminates
von: Putic, S., et al.
Veröffentlicht: (2003)
von: Putic, S., et al.
Veröffentlicht: (2003)
Fatigue lifetime of ADI from ultimate tensile strength to permanent fatigue limit
von: Zapletal, J., et al.
Veröffentlicht: (2008)
von: Zapletal, J., et al.
Veröffentlicht: (2008)
Size effect in contact fatigue
von: Sosnovskii, L.A., et al.
Veröffentlicht: (2009)
von: Sosnovskii, L.A., et al.
Veröffentlicht: (2009)
The harnessing of thermoelectric generators under asphalt
von: V. O. Dudal
Veröffentlicht: (2014)
von: V. O. Dudal
Veröffentlicht: (2014)
Surface Strengthening Behavior of Magnesium Alloy with Laser Thermal Loading under Rapid Cooling
von: Ge, Y.Q., et al.
Veröffentlicht: (2018)
von: Ge, Y.Q., et al.
Veröffentlicht: (2018)
Elastoplastic Damage Model for Concrete under Triaxial Compression and Reversed Cyclic Loading
von: Zhang, J., et al.
Veröffentlicht: (2018)
von: Zhang, J., et al.
Veröffentlicht: (2018)
Fracture and Fatigue Analysis for a Cracked Carabiner Using 3D Finite Element Simulations
von: Aliha, M.R.M., et al.
Veröffentlicht: (2015)
von: Aliha, M.R.M., et al.
Veröffentlicht: (2015)
Numerical simulation of brittle damage in concrete specimens
von: Labadi, Y., et al.
Veröffentlicht: (2005)
von: Labadi, Y., et al.
Veröffentlicht: (2005)
Flexural Fatigue Behavior of Cross-Ply Laminates: An Experimental Approach
von: Bezazi, A.R., et al.
Veröffentlicht: (2003)
von: Bezazi, A.R., et al.
Veröffentlicht: (2003)
Short Fatigue Crack Behavior of LZ50 Axle Steel under Rotating-Bending Cyclic Loading
von: Yang, B., et al.
Veröffentlicht: (2018)
von: Yang, B., et al.
Veröffentlicht: (2018)
Wear-fatigue test methods and their significance
von: Bahdanovich, A.V., et al.
Veröffentlicht: (2009)
von: Bahdanovich, A.V., et al.
Veröffentlicht: (2009)
Experimental Study and Finite Element Analysis of Critical Stresses of Reinforced Thermoplastic Pipes under Various Loads
von: Li, G.H., et al.
Veröffentlicht: (2016)
von: Li, G.H., et al.
Veröffentlicht: (2016)
Influence of Temperature on Fatigue Crack Propagation in TiAl Alloys
von: Feng, R.C., et al.
Veröffentlicht: (2014)
von: Feng, R.C., et al.
Veröffentlicht: (2014)
Coupled Effects of Strain Rate and Temperature on Deformation Twinning in Cu-Zn Alloy
von: Zhou, P., et al.
Veröffentlicht: (2016)
von: Zhou, P., et al.
Veröffentlicht: (2016)
Fatigue Life Prediction of Welded Box Structures
von: Zedira, H., et al.
Veröffentlicht: (2004)
von: Zedira, H., et al.
Veröffentlicht: (2004)
A model of fatigue crack propagation in metals
von: Yakovleva, T.Yu., et al.
Veröffentlicht: (2009)
von: Yakovleva, T.Yu., et al.
Veröffentlicht: (2009)
Stress Distribution Behavior in Single-Lap Adhesively Bonded Beams
von: He, X., et al.
Veröffentlicht: (2014)
von: He, X., et al.
Veröffentlicht: (2014)
Ähnliche Einträge
-
Creep Lifetime Assessment of Pressure-Tight PE100 Pipes Based on a Slow Fatigue Crack Growth
von: Luo, W.B., et al.
Veröffentlicht: (2018) -
Numerical Simulation of Fatigue Damage and Shape Instability Behavior of Steel 40Cr by the Damage-Coupled Crystal Plastic Model
von: Wu, G.C., et al.
Veröffentlicht: (2017) -
High-Cycle Fatigue Properties and Damage Mechanism of Q345B Structural Steel
von: Hu, X.L., et al.
Veröffentlicht: (2017) -
Experimental Analysis of Behavior and Damage of Sandwich Composite Materials in Three-Point Bending. Part 2. Fatigue Test Results and Damage Mechanisms
von: Bezazi, A., et al.
Veröffentlicht: (2009) -
Isothermal Fatigue and Creep-Fatigue Interaction Behavior of Nickel-Base Directionally Solidified Superalloy
von: Haq, A.U., et al.
Veröffentlicht: (2018)