Buchumschlag

Mechanical and Aging Properties of Polypropylene and Styrene-Butadiene-Styrene Composites under Outdoor and Indoor Conditions

Polypropylene (PP) and styrene-butadiene-styrene (SBS) blends with different mass fractions were prepared in a molten state using a twin-screw extruder. The effect of SBS content on the microstructure and properties of PP/SBS was discussed by studying the morphology and mechanical properties of PP/S...

Ausführliche Beschreibung

Gespeichert in:

Bibliographische Detailangaben
Veröffentlicht in:	Проблемы прочности
Datum:	2018
Hauptverfasser:	Yimit, M., Ni, L., Du, Y., Bkan, R.
Format:	Artikel
Sprache:	Englisch
Veröffentlicht:	Інститут проблем міцності ім. Г.С. Писаренко НАН України 2018
Schlagworte:	Научно-технический раздел
Online Zugang:	https://nasplib.isofts.kiev.ua/handle/123456789/173998
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:	Digital Library of Periodicals of National Academy of Sciences of Ukraine
Zitieren:	Mechanical and Aging Properties of Polypropylene and Styrene-Butadiene-Styrene Composites under Outdoor and Indoor Conditions / M. Yimit, L. Ni, Y. Du, R. Bkan // Проблемы прочности. — 2018. — № 5. — С. 115-126. — Бібліогр.: 23 назв. — англ.

Institution

Digital Library of Periodicals of National Academy of Sciences of Ukraine

Ähnliche Einträge

Styrene polymerization in presence of the disperse iron oxide
von: V. S. Dutka
Veröffentlicht: (2013)

Copolymerization of monomethacrylate derivative of diglycidyl ether dioxydiphenylpropane with styrene
von: M. M. Bratychak, et al.
Veröffentlicht: (2015)

Features of styrene polymerization in the presence of the disperse chromium oxide
von: V. S. Dutka, et al.
Veröffentlicht: (2014)

Synthesis of composite materials based on oligooxypropylene fumarate, triethylene glycol dimethacrylate, and styrene with prolonged release of levamisole
von: T. V. Rudenchyk, et al.
Veröffentlicht: (2016)

Synthesis and spectral-luminescent properties of Tb(III), Dy(III) and Tm(III) compounds with copolymers of 5-methyl-5-hexene-2,4-dione and styrene
von: S. B. Meshkova, et al.
Veröffentlicht: (2014)

The effect of aluminosilicate filler on the physico-mechanical characteristics of polypropylene-polycaproamide composites
von: O. V. Suberliak, et al.
Veröffentlicht: (2014)

Effects in electrical properties of carbon-polypropylene composites
von: A. S. Tonkoshkur, et al.
Veröffentlicht: (2016)

Effects in electrical properties of carbon-polypropylene composites
von: A. S. Tonkoshkur, et al.
Veröffentlicht: (2016)

Heat and mass exchange analysis indoors
von: A. L. Yerokhin, et al.
Veröffentlicht: (2016)

Phase morphology and properties of sequential polyurethane butadiene – polymethylmethacrylate semi-IPNs
von: O. O. Brovko, et al.
Veröffentlicht: (2016)

Selection of the strategy of placing outdoor advertising of trading enterprises on the basis of the matrix model
von: O. M. Melnykovych, et al.
Veröffentlicht: (2013)

Polypropylene fibers filled with carbon nanotubes: mechanical properties and biocompatibility
von: Yu. I. Sementsov, et al.
Veröffentlicht: (2013)

Modeling of the Static Geomagnetic Field Indoor Dwelling Houses
von: Ju. Rozov, et al.
Veröffentlicht: (2014)

Does natural gas increase the indoor radon levels?
von: H. A. Abdel-Ghany, et al.
Veröffentlicht: (2015)

Polypropylene-carbon nanotubes composites : structural features, physical and chemical properties
von: Yu. I. Sementsov, et al.
Veröffentlicht: (2012)

Radiation damage of isotactic polypropylene composites with multi-walled carbon nanotubes
von: Diyakon, L.V., et al.
Veröffentlicht: (2008)

Economical substantiation of choosing of organization&#039;s form of trade enterprises outdoor advertising
von: A. S. Krepak
Veröffentlicht: (2012)

Some peculiarities of Polissia dwellings establishing: outdoor walls finishing, porch and floor building
von: R. Radovych
Veröffentlicht: (2017)

Influence of nano-filler on the mechanism of crystallization of systems based on polypropylene and aerosil
von: R. V. Dinzhos, et al.
Veröffentlicht: (2019)

Identification of fracture mechanisms of cement mortar reinforced with basalt and polypropylene fibers
von: V. R. Skalskyi, et al.
Veröffentlicht: (2020)

EXPERIMENTAL RESEARCH INTO INDOOR STATIC GEOMAGNETIC FIELD WEAKENING PHENOMENON
von: Rozov, V. Yu., et al.
Veröffentlicht: (2013)

Influence of high-dispersed calcite on rheology, structure, and thermostability of polypropylene-based compositions there of
von: L. S. Dziubenko, et al.
Veröffentlicht: (2019)

Information technology in decision making based on classification and indoor movement analysis
von: D. A. Skachko
Veröffentlicht: (2014)

Experimental Analysis of the Influence of Structural Parameters on the Behavior of Glass-Fiber Reinforced Polypropylene Composites
von: Bounouas, L., et al.
Veröffentlicht: (2001)

Fuel Economy During Heat Supply for Buildings with Indoor Swimming Pools under the Conditions of Joint Operation of Heat Pump Plant and Standard Heat Generator
von: V. D. Petrash, et al.
Veröffentlicht: (2016)

Microscopic fungi found on damaging indoors finishing coating materials (plaster and paint)
von: T. O. Kondratiuk, et al.
Veröffentlicht: (2011)

Thermodynamic Efficiency of Use of Heat Pumps in the Air Ventilation System in the Indoor Pools
von: M. K. Bezrodnyj, et al.
Veröffentlicht: (2013)

Phytomodule Cluster as a Structural Element of Indoor Area of Various Functional Purpose
von: L. I. Buiun, et al.
Veröffentlicht: (2020)

The influence of nanosized bacteriostat on properties of polypropylene fibers
von: L. S. Dziubenko, et al.
Veröffentlicht: (2011)

The influence of carbon-containing, magnetic and nano-dispersed additions on structure and electrophysical properties of polypropylene-based composite monofibers
von: L. S. Dziubenko, et al.
Veröffentlicht: (2021)

Comparative study of the effect of gamma-radiation on the structural and thermophysical properties of nitrile-butadiene rubber filled with different nanometal oxides
von: Khankishiyeva, R.F., et al.
Veröffentlicht: (2020)

Percolation properties of systems based on polypropylene glycol and carbon nanotubes
von: E. A. Lysenkov, et al.
Veröffentlicht: (2013)

Percolation properties of systems based on polypropylene glycol and carbon nanotubes
von: E. A. Lysenkov, et al.
Veröffentlicht: (2013)

Composite adsorbent based on polypropylene fibers with deposited layer of potassium-nickel ferrocyanide for concentration of Cs-137 from contaminated waters
von: Ju. V. Bondar, et al.
Veröffentlicht: (2016)

Herbarium in polypropylene files. On a new approach to storage of herbarium specimens
von: A. V. Yena
Veröffentlicht: (2011)

Electrical and optical percolation in systems based on polypropylene glycol and carbon nanotubes
von: E. A. Lysenkov, et al.
Veröffentlicht: (2013)

The features of structure forming in the blends of polypropylene – plastified poly(vinyl alcohol)
von: L. S. Dziubenko, et al.
Veröffentlicht: (2016)

Regularity of flowing and structure-formation in polypropylene–polyvinylalcohol–silica mixture melts
von: N. M. Rezanova, et al.
Veröffentlicht: (2014)

Structural features of polymer nanocomposites based on polypropylene glycol and carbon nanotubes
von: E. A. Lysenkov, et al.
Veröffentlicht: (2015)

Quantum chemical study on the interaction of carbon nanotube with polyethylene and polypropylene oligomers
von: M. I. Terets, et al.
Veröffentlicht: (2019)